HP-UX Reference (11i v2 07/12) - 1 User Commands N-Z (vol 2)

p
parstatus(1) parstatus(1)
NAME
parstatus - display information about a hardware partitionable complex
SYNOPSIS
parstatus
[[-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h
IPaddress|hostname ]]
parstatus -s
[[-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h
IPaddress|hostname ]]
parstatus -w [-M]
[ -u username:[passwd] -h
IPaddress|hostname ]
parstatus -X
[[-u username:[passwd]
-h IPaddress|hostname ]
|[
-g [passwd] -h
IPaddress|hostname ]]
parstatus -C|-I [-A][-M]
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parstatus -B|-P [-M]
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parstatus -i I/Ochassis [-i I/Ochassis]... [-M]
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parstatus -c cell [-c cell]... [-V|-M]
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parstatus -b cabinet [-b cabinet]... [-V|-M]
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parstatus -p PartitionNumber [
-p PartitionNumber]... [-V|-M]
[[
-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
parstatus -T
[[-u username:[passwd] -h IPaddress|hostname ]
|[
-g [passwd] -h IPaddress|hostname ]]
DESCRIPTION
The
parstatus command displays information about a system complex. If no arguments are supplied,
all major components that are physically present in the local complex are listed. Specify a component (cell,
I/O chassis, cabinet, or partition) to restrict the output to information about that component. Either the -u
option or the -g option can be specified to access a remote complex.
The parstatus command also displays Hyper-Threading information (only on supported platforms). See
the cplxmodify(1M), parcreate(1M) and parmodify(1M) manpages for an explanation on how to enable or
disable Hyper-Threading.
Refer to the HP System Partitions Guide for a description of the partition management terms used in this
manpage. Refer to partition(5) for a list of partition management commands.
Options and Arguments
parstatus recognizes the following command line options and arguments:
-s Indicates if the command is being executed on a hardware partitionable platform. When this
option is specified, the command will either succeed or fail (see RETURN VALUE below) and
nothing will be displayed on stdout or stderr.
-u username:[passwd]
Specifies the required authorization to access a partition other than the local partition (but can
120 Hewlett-Packard Company − 1 − HP-UX 11i Version 2: December 2007 Update