HP-UX Reference (11i v2 07/12) - 1 User Commands A-M (vol 1)

c
ckconfig(1) ckconfig(1)
NAME
ckconfig - verify the path names of all the FTP configuration files.
SYNOPSIS
/usr/bin/ckconfig
[-V]
DESCRIPTION
The
ckconfig utility is used to verify the path names of the FTP configuration files,
/etc/ftpd/ftpusers
, /etc/ftpd/ftpaccess
, /etc/ftpd/ftpconversions
,
/etc/ftpd/ftpgroups
, /etc/ftpd/ftphosts
, /var/adm/syslog/xferlog
, and
/etc/ftpd/pids/*
.
This utility checks to see that all the FTP configuration files are in the path specified. If it is not able to find
the configuration files in the path, it will give out an error message to the system administrator about the
same.
The
-V option causes the program to display copyright and version information, then terminate.
FILES
/usr/bin/ckconfig
AUTHOR
ckconfig was developed by the Washington University, St. Louis, Missouri.
SEE ALSO
ftpusers(4), ftpconversions(4), ftpaccess(4), ftphosts(4), ftpgroups(4), xferlog(5).
158 Hewlett-Packard Company − 1 − HP-UX 11i Version 2: December 2007 Update