HP-UX Reference (11i v2 04/09) - 7 Device (Special) Files, 9 General Information, Index (vol 10)

t
termio(7) termio(7)
Bit Value
h
3
Card diagnostic
h
2
Port diagnostic
h
1
Reserved
h
0
Enables RTS/CTS hardware flow control
M = One hexadecimal digit (4 bits) for the port access type. Values for each bit are as follows:
Bit Value
m
3
TI/ALP
m
2
0 = Simple protocol (U.S.),
1 = CCITT protocol (Europe)
m
1
m
0
00=Direct
01 = Dial-out modem
10 = Dial-in modem
11=Invalid
AUTHOR
termios was developed HP and the IEEE Computer Society.
termio was developed by HP, AT&T, and the University of California, Berkeley.
FILES
/dev/console
/dev/cua*
/dev/cul*
/dev/tty*
/dev/ttyd*
SEE ALSO
adb(1), shl(1), stty(1), kctune(1M), dmesg(1M), mknod(1M), fork(2), ioctl(2), setsid(2), signal(2), stty(2),
setpgid(2), blmode(3C), cfspeed(3C), tccontrol(3C), tcattribute(3C), tcgetpgrp(3C), tcsetpgrp(3C),
tcgetsid(3C), signal(5), unistd(5), sttyV6(7), tty(7), modem(7), termiox(7).
STANDARDS CONFORMANCE
termio: SVID2, SVID3, XPG2
termios: AES, SVID3, XPG3, XPG4, FIPS 151-2, POSIX.1
HP-UX 11i Version 2: September 2004 − 21 − Hewlett-Packard Company Section 7−−195