HP-UX Reference (11i v2 04/09) - 1M System Administration Commands N-Z (vol 4)

parunlock(1M) parunlock(1M)

EXAMPLES

Unlock the Partition Conﬁguration Data of the partition whose partition number is

parunlock -p 2

Unlock the cell data of the cell 2

parunlock -c 2

Unlock the Stable Complex Conﬁguration Data on the local complex.

parunlock -s

Unlock the Dynamic Complex Conﬁguration Data on the local complex.

parunlock -d

Unlock the Stable Complex Conﬁguration Data, the Dynamic Complex Conﬁguration Data, the Partition

Conﬁguration Data of all the partitions on the local complex and the cell data of all the cells in the local

complex.

parunlock -A

DEPENDENCIES

This command uses the Web-Based Enterprise Management (WBEM) product and certain of its

conﬁguration settings. If you encounter connection errors when using the -u option, check that the fol-

lowing two conditions are satisﬁed:

• Use the cimconﬁg(1M) command to verify (and correct if necessary) the setting of the following two

variables:

•

enableRemotePrivilegedUserAccess=true

• enableHttpsConnection=true

• You must have appended the target partition’s digital certiﬁcate to the local partition’s Trust Store ﬁle.

For the nPartition commands, the Trust Store ﬁle is

/var/opt/wbem/client.pem.

Note : You must have appended the target partition’s digital certiﬁcate to the local partition’s Trust

Store ﬁle. For the npartition commands, the Trust Store ﬁle is

/var/opt/wbem/client.pem.

This ﬁle is used by the commands that come with WBEM installation. Hence, if the commands that

come with the WBEM installation trust a target partition, then npartition commands will also trust

the target partition.

Refer to the WBEM documents speciﬁed in the SEE ALSO section below for further information.

AUTHOR

parunlock was developed by the Hewlett-Packard Company.