HP-UX Reference (11i v2 04/09) - 1M System Administration Commands A-M (vol 3)

ManualsBrandsHP ManualsSoftwareHP-UX Reference Manuals

201

202

203

204

205

206

207

208

209

210

fcmsutil(1M) fcmsutil(1M)

fcmsutil FCD_device_ﬁle.

dump_nvram (QL)

This option is used to display the contents of NVRAM on the adapter. It is supported

only by DUAL PORT and FC/GigE Combo cards.

rom_fw_update

(QL)

This option is used to update the ROM ﬁrmware stored in card’s FLASH ROM. WARN-

ING: This is a DESTRUCTIVE operation. Using this option may result in

failure of current I/O requests. This option requires the name of a binary image ﬁle

that contains the updated ﬁrmware. This operation should only be performed by qualiﬁed

personnel. Failure to successfully complete the ﬁrmware update may result in adapter

and/or system failure in case the boot disks are accessed through this card.

This option is supported only by DUAL PORT and FC/GigE Combo cards.

efi_drv_update

(QL)

This option is used to update the EFI driver stored in card’s FLASH ROM. WARNING:

This is a DESTRUCTIVE operation. Using this option may result in failure of

current IO requests. This option requires the name of a binary image ﬁle that con-

tains the EFI driver. This operation should only be performed by qualiﬁed personnel.

Failure to successfully complete the EFI driver update may result in adapter and/or sys-

tem boot up failure if the boot disks are accessed through this card.

This option is supported only by DUAL PORT and FC/GigE combo cards.

EXAMPLES

Print the remote port parameters using the get remote option if the driver is idle.

/dev/fcms1 is the

device ﬁle and

/dev/rdsk/c27t0d0

is the respective raw disk ﬁle.

fcmsutil /dev/fcms1 get remote 0x98 < /dev/rdsk/c27t0d0

Print a short listing of the statistics maintained by the driver, with /dev/td1

as the device ﬁle.

fcmsutil /dev/td1 stat -s

Send 5 echo packets of 200 bytes each to a remote N_Port with loop_id 4, with

/dev/td1 as the device

ﬁle

fcmsutil /dev/td1 echo -l 4 200 5

Print a short listing of the statistics of the device whose

remote-N-Port-ID is 0x02ae4 and with

/dev/td1 as the device ﬁle

fcmsutil /dev/td1 devstat 0x02ae4

Clear the device statistics of the device whose wwn is 0x100000e002219f45 and with

/dev/td1 as the

device ﬁle

fcmsutil /dev/td1 clear_devstat -w 0x100000e002219f45

Perform a Internal loopback test, sending 1000 packets with /dev/fcd2 as the device ﬁle

fcmsutil /dev/fcd2 lb int crpat 1000

AUTHOR

/opt/fcms/bin/fcmsutil was developed by HP.