HP-UX Reference (11i v2 04/09) - 1M System Administration Commands A-M (vol 3)

f
fcmsutil(1M) fcmsutil(1M)
NAME
fcmsutil - Fibre Channel Mass Storage Utility Command for TACHYON TL A5158A, A6684A, A6685A,
TACHYON XL2 A6795A, DUAL PORT A6826A and FC/GigE Combo A9782A/A9784A Fibre Channel Host
Bus Adapters
SYNOPSIS
/opt/fcms/bin/fcmsutil
device_file
/opt/fcms/bin/fcmsutil
device_file
vpd
/opt/fcms/bin/fcmsutil device_file
echo remote-N-Port-ID [data-size][count]
/opt/fcms/bin/fcmsutil
device_file
rls remote-N-Port-ID
/opt/fcms/bin/fcmsutil
device_file
test remote-N-Port-ID [data-size][count]
/opt/fcms/bin/fcmsutil
device_file
read offset [pci]
/opt/fcms/bin/fcmsutil
device_file
write offset value [pci]
/opt/fcms/bin/fcmsutil
device_file [
-f] lb [plm|crpat|cjtpat]
/opt/fcms/bin/fcmsutil
device_file
get local|fabric
/opt/fcms/bin/fcmsutil
device_file get remote {all|remote-N-Port-ID}
/opt/fcms/bin/fcmsutil
device_file get_lgn N-Port-ID
/opt/fcms/bin/fcmsutil
device_file reset
/opt/fcms/bin/fcmsutil
device_file [-f] bdr target-device_file
/opt/fcms/bin/fcmsutil
device_file read_cr
/opt/fcms/bin/fcmsutil
device_file lgninfo_all
/opt/fcms/bin/fcmsutil
device_file stat [-s]
/opt/fcms/bin/fcmsutil
device_file clear_stat
/opt/fcms/bin/fcmsutil
device_file nsstat
/opt/fcms/bin/fcmsutil
device_file clear_nsstat
/opt/fcms/bin/fcmsutil
device_file devstat {all|remote-N-Port-ID}
/opt/fcms/bin/fcmsutil
device_file clear_devstat {all|remote-N-Port-ID}
/opt/fcms/bin/fcmsutil
device_file replace_dsk remote-N-Port-ID
/opt/fcms/bin/fcmsutil
device_file [-f] disable
/opt/fcms/bin/fcmsutil
device_file enable
/opt/fcms/bin/fcmsutil
device_file [-k] ns_query_ports
/opt/fcms/bin/fcmsutil device_file [-f] dump_current_state
/opt/fcms/bin/fcmsutil device_file dump_saved_state
/opt/fcms/bin/fcmsutil device_file dump_nvram
/opt/fcms/bin/fcmsutil device_file rom_fw_update
ROM_Firmware_file
/opt/fcms/bin/fcmsutil device_file efi_drv_update
EFI_Driver_file
Note: For the TACHYON TL A5158A, A6684A, A6685A, TACHYON XL2 A6795A, DUAL PORT
A6826A and FC/GigE Combo A9782A/A9784A cards, remote-N-port-ID can be substituted with
-l
loop_id (in Private Loop), or -w wwn for all options that take remote-N-port-ID as an argu-
ment. The devstat all option displays the loop_id (in Private Loop) and the nport_id (in
Fabric) along with the statistics for all N_Ports the initiator was able to communicate with.
DESCRIPTION
The
fcmsutil command is a diagnostic tool to be used for TACHYON TL A5158A, A6684A, A6685A,
TACHYON XL2 A6795A, DUAL PORT A6826A and FC/GigE Combo A9782A/A9784A Fibre Channel Host
Bus Adapters. This command provides the ability to perform Fibre Channel Test and Echo functionality,
read the card’s registers, etc. This command requires the use of a device file to indicate the interface over
which the requested command needs to be performed.
Section 1M−−182 Hewlett-Packard Company − 1 − HP-UX 11i Version 2: September 2004