HP-UX Reference (11i v2 04/09) - 1 User Commands N-Z (vol 2)

parstatus(1) parstatus(1)

cab0,bay1,chassis0 Absent - - -

cab0,bay1,chassis1 Active yes cab0,cell6 1

cab0,bay1,chassis2 Absent - - -

cab0,bay1,chassis3 Inactive yes cab0,cell2 1

[Partition]

Par # of # of I/O

Num Status Cells Chassis Core cell Partition Name (first 30 chars)

=== ============ ===== ======== ========== ===============================

0 Active 2 1 cab0,cell0 cup2000

1 Active 3 2 cab0,cell6 cup2006

2 Active 2 1 cab0,cell4 cup2004

DEPENDENCIES

This command uses the Web-Based Enterprise Management (WBEM) product and certain of its

conﬁguration settings. If you encounter connection errors when using the

-u option, check that the fol-

lowing two conditions are satisﬁed:

• Use the cimconﬁg(1M) command to verify (and correct if necessary) the setting of the following two

variables:

•

enableRemotePrivilegedUserAccess=true

• enableHttpsConnection=true

• You must have appended the target partition’s digital certiﬁcate to the local partition’s Trust Store ﬁle.

For the nPartition commands, the Trust Store ﬁle is

/var/opt/wbem/client.pem.

Note: You must have appended the target partition’s digital certiﬁcate to the local partition’s Trust

Store ﬁle. For the npartition commands, the Trust Store ﬁle is

/var/opt/wbem/client.pem.

This ﬁle is used by the commands that come with WBEM installation. Hence, if the commands that

come with the WBEM installation trust a target partition, then npartition commands will also trust

the target partition.

Refer to the WBEM documents speciﬁed in the SEE ALSO section below for further information.

AUTHOR

parstatus was developed by the Hewlett-Packard Company.