HP-UX Reference (11i v2 04/09) - 1 User Commands A-M (vol 1)

c
ckconfig(1) ckconfig(1)
NAME
ckconfig - verify the path names of all the FTP configuration files.
SYNOPSIS
/usr/bin/ckconfig
[-V]
DESCRIPTION
The
ckconfig utility is used to verify the path names of the FTP configuration files,
/etc/ftpd/ftpusers
, /etc/ftpd/ftpaccess
, /etc/ftpd/ftpconversions
,
/etc/ftpd/ftpgroups
, /etc/ftpd/ftphosts
, /var/adm/syslog/xferlog
, and
/etc/ftpd/pids/*
.
This utility checks to see that all the FTP configuration files are in the path specified. If it is not able to
find the configuration files in the path, it will give out an error message to the system administrator about
the same.
The
-V option causes the program to display copyright and version information, then terminate.
FILES
/usr/bin/ckconfig
AUTHOR
ckconfig was developed by the Washington University, St. Louis, Missouri.
SEE ALSO
ftpusers(4), ftpconversions(4), ftpaccess(4), ftphosts(4), ftpgroups(4), xferlog(5).
HP-UX 11i Version 2: September 2004 − 1 − Hewlett-Packard Company Section 1−−113