HP-UX Reference (11i v2 03/08) - 4 File Formats (vol 8)

b
bootconf(4) bootconf(4)
# Boot Device configuration file
# This file contains information regarding the location
# of the boot LIF. It is used by the KERN-RUN fileset to
# update the boot kernel.
l /dev/dsk/c1d0s2
l /dev/dsk/c4d0s2
l /dev/dsk/c5d0s2
The boot area is on a hard partitioned disk:
# Boot Device configuration file
# This File contains information regarding the location
# of the boot LIF. It is used by the KERN-RUN fileset to
# update the boot kernel.
p /dev/dsk/0s0
The boot area is on a whole disk layout:
# Boot Device configuration file
# This File contains information regarding the location
# of the boot LIF. It is used by the KERN-RUN fileset to
# update the boot kernel.
w /dev/dsk/6s0
WARNINGS
All of the boot devices in the file must have the same disk layout.
AUTHOR
bootconf was developed by the Hewlett-Packard Company.
FILES
/stand/bootconf
SEE ALSO
mediainit(1), hpux(1M), mkboot(1M), vgdisplay(1M), lif(4).
Software Distributor documentation.
HP-UX 11i Version 2: August 2003 − 2 − Hewlett-Packard Company Section 4−−25