HP-UX Reference Section 3: Library Functions (A-M) HP-UX 11i Version 2 Volume 6 of 9 Manufacturing Part Number : B2355-90784 Printed In USA E0803 Printed in USA © Copyright 1983-2003 Hewlett-Packard Development Company LP.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Copyright 1980, 1984, 1986 Novell, Inc. Copyright 1985, 1986, 1988 Massachusetts Institute of Technology Copyright 1986-2000 Sun Microsystems, Inc. Copyright 1988 Carnegie Mellon University Copyright 1989-1991 The University of Maryland Copyright 1989-1993 The Open Software Foundation, Inc. Copyright 1990 Motorola, Inc. Copyright 1990-1992 Cornell University Copyright 1991-2003 Mentat, Inc. Copyright 1996 Morning Star Technologies, Inc. Copyright 1996 Progressive Systems, Inc.
Revision History This document’s printing date and part number indicate its edition. The printing date changes when a new edition is printed. (Minor corrections and updates which are incorporated at reprint do not cause the date to change.) New editions of this manual incorporate all material updated since the previous edition. Part Number Date, Release, Format, Distribution B2355-60103 August 2003. HP-UX release 11i version 2, one volume HTML, docs.hp.com and Instant Information.
manpage itself. From the HP-UX command line, you can enter “man audit” or “man 5 audit” to view the manpage. See man (1). Book Title The title of a book. On the web and on the Instant Information CD, it may be a hot link to the book itself. KeyCap The name of a keyboard key. Note that Return and Enter both refer to the same key. Emphasis Text that is emphasized. Emphasis Text that is strongly emphasized. ENVIRONVAR The name of an environment variable.
vi
Preface HP-UX is the Hewlett-Packard Company’s implementation of an operating system that is compatible with various industry standards. It is based on the UNIX System V Release 4 operating system and includes important features from the Fourth Berkeley Software Distribution. The nine volumes of this manual contain the system reference documentation, made up of individual entries called manpages, named for the man command that displays them on the system.
viii
Volume Six Table of Contents Section 3
Volume Six Table of Contents Section 3
Table of Contents Volumes Six and Seven Section 3: Library Functions Entry Name(Section): name Description intro(3): intro() ............................................................................. introduction to subroutines and libraries a64l(3C): a64l(), l64a(), l64a_r() ....................... convert between long integer and base-64 ASCII string abort(3C): abort() .........................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description asind(3M): asind(), asindf() , asindl() , asindw() , asindq() ............ degree-valued arcsine functions asindf() : degree-valued arcsine function (float) ...................................................................... see asind(3M) asindl() : degree-valued arcsine function (long double) ........................................................... see asind(3M) asindq() : degree-valued arcsine function (quad) .............
Table of Contents Volumes Six and Seven Entry Name(Section): name Description auth_destroy(): library routines for client side rpc authentication ......................... see rpc_clnt_auth(3N) basename(3C): basename() , dirname() ................................................ extract components of a path name baudrate(3X): baudrate .............................................................................................. get terminal baud rate bcmp(): memory operations, compare bytes ................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description cargl(): complex argument function (long double) .................................................................... see carg(3M) cargq(): complex argument function (quad) ............................................................................... see carg(3M) cargw(): complex argument function (extended) ........................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description cimag(3M): cimag(), cimagf() ................................................................ complex imaginary-part functions cimagf() : complex imaginary-part function (float) .................................................................. see cimag(3M) cimagl() : complex imaginary-part function (long double) .......................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description conjf(): complex conjugate function (float) ................................................................................ see conj(3M) conjl(): complex conjugate function (long double) ..................................................................... see conj(3M) conjq(): complex conjugate function (quad) ...............................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description csinhq() : complex hyperbolic sine function (quad) .................................................................. see csinh(3M) csinhw() : complex hyperbolic sine function (extended) ............................................................ see csinh(3M) csinl(): complex sine function (long double) ..............................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description db_table_exists(): NIS+ database access functions ........................................................... see nis_db(3N) db_unload_table(): NIS+ database access functions ........................................................... see nis_db(3N) def_prog_mode(3X): def_prog_mode(), def_shell_mode(), reset_prog_mode(), reset_shell_mode() ..................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description elf64_getshdr(): retrieve class-dependent section header for ELF files ...................... see elf_getshdr(3E) elf64_newehdr(): retrieve class-dependent object file header for ELF files .................... see elf_getehdr(3E) elf64_newphdr(): retrieve class-dependent program header table for ELF files ............ see elf_getphdr(3E) elf64_xlatetof(): class-dependent data translation of ELF files ..............................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description endprotoent_r(): end protocol entry (thread-safe) ...................................................... see getprotoent(3N) endprpwent() : manipulate protected password database entry ....................................... see getprpwent(3) endprtcent() : close terminal control database .................................................................. see getprtcent(3) endpwent() : get password file entry ......................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description fdetach(3C): fdetach() ........................................ detach a STREAMS-based file descriptor from a filename fdim(3M): fdim(), fdimf(), fdiml(), fdimw(), fdimq() .............................. positive difference functions fdimf(): positive difference function (float) ................................................................................ see fdim(3M) fdiml(): positive difference function (long double) .........
Table of Contents Volumes Six and Seven Entry Name(Section): name Description fmax(3M): fmax(), fmaxf(), fmaxl(), fmaxw(), fmaxq() ................................. maximum value functions fmaxf(): maximum value function (float) ................................................................................... see fmax(3M) fmaxl(): maximum value function (long double) ....................................................................... see fmax(3M) fmaxq(): maximum value function (quad) ................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description .................................................................................................... convert formatted wide-character input gai_strerror(): get hostname and address entry ....................................................... see getaddrinfo(3N) gamma(): log gamma function (double) ..................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description getnetconfig(3N): getnetconfig(), setnetconfig(), endnetconfig(), getnetconfigent(), freenetconfigent(), nc_perror() , nc_sperror() ......... get network configuration database entry getnetconfigent(): get network configuration data base entry ................................ see getnetconfig(3N) getnetent() : get network entry ...........................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description setspent() , endspent() ........................................................................ get secure password file entry getspnam_r() : get secure password file entry ..................................................................... see getspent(3C) getspwaid() : get secure password file entry on trusted systems ......................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description gsignal() : software signals .................................................................................................... see ssignal(3C) gss_accept_sec_context(3): gss_accept_sec_context() .................................. establish security context gss_acquire_cred(3): gss_acquire_cred() ................................................... acquire handle for credential gss_add_cred(3): gss_add_cred() ............
Table of Contents Volumes Six and Seven Entry Name(Section): name Description herror - resolver routines .............................................................................................................. resolver(3N) herror() : resolver routines .................................................................................................. see resolver(3N) hline(3X): hline(), mvhline() , mvvline() , mvwhline() , mvwvline() , vline(), whline() , wvline() .......................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description .............................................................................................................................. see inet6_opt_init(3N) inet6_opt_finish(): IPv6 Hop-by-Hop and Destination options manipulation functions. ..............................................................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description ........................................................ input an array of complex characters and renditions from a window in_wchstr() : input an array of complex characters and renditions from a window ......... see in_wchnstr(3X) isalnum() : classify characters ................................................................................................... see ctype(3C) isalpha() : classify characters ........................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description ldecvt() (_ldecvt() ): convert long double floating-point number to string ............................ see ldcvt(3C) ldexp(3M): ldexp(), ldexpf() , ldexpl() , ldexpw() , ldexpq()scale exponent of a floating-point number ldexpf() : scale exponent of a floating-point number (float) ..................................................... see ldexp(3M) ldexpl() : scale exponent of a floating-point number (long double) .................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description logbf(): radix-independent exponent function (float) ................................................................. see logb(3M) logbl(): radix-independent exponent function (long double) ..................................................... see logb(3M) logbq(): radix-independent exponent function (quad) ................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description mount(3N) ...................................................................................... keep track of remotely mounted file systems move(3X): move(), wmove() ........................................................................ window cursor location functions mrand48() : generate pseudo-random numbers .....................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description mvwadd_wchnstr(): add an array of complex characters and renditions to a window ... see add_wchnstr(3X) mvwadd_wchstr(): add an array of complex characters and renditions to a window ..... see add_wchnstr(3X) mvwchgat() : change renditions of characters in a window ........................................................... see chgat(3X) mvwdelch(): delete character from a window ...................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description newpad(3X): newpad() , pnoutrefresh(), prefresh() ................................... pad management functions newterm() : screen initialisation functions .................................................................................. see initscr(3X) newwin(3X): newwin() , subwin() ........................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description nis_name_of (): NIS+ subroutine ...................................................................................... see nis_subr(3N) nis_next_entry(): NIS+ table functions ........................................................................ see nis_tables(3N) nis_objects(3N): nis_objects() ....................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description pam_sm(3): pam_sm() ............................................................................................. PAM Service Module APIs pam_sm_acct_mgmt(3): pam_sm_acct_mgmt() ....... service provider implementation for pam_acct_mgmt pam_sm_authenticate(3): pam_sm_authenticate() ....................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description pthread_attr_getinheritsched(): get inheritsched attribute ... see pthread_attr_getdetachstate(3T) pthread_attr_getprocessor_np(): get processor and binding_type attributes ........................................................ see pthread_attr_getdetachstate(3T) pthread_attr_getschedparam(): get schedparam attribute ....... see pthread_attr_getdetachstate(3T) pthread_attr_getschedpolicy(): get schedpolicy attribute ......
Table of Contents Volumes Six and Seven Entry Name(Section): name Description ............................................................................................... create or destroy a thread-specific data key pthread_key_delete(): destroy a thread-specific data key .......................... see pthread_key_create(3T) pthread_kill(3T): pthread_kill() ........................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description pthread_processor_id_np(): bind threads to processors ............. see pthread_processor_bind_np(3T) pthread_pset_bind_np(): bind threads to processor set ................ see pthread_processor_bind_np(3T) pthread_resume_np(3T): pthread_continue(), pthread_resume_np(), pthread_suspend() ...................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description putwc(3C): putwc(), putwchar() , fputwc() , putwc_unlocked(), putwchar_unlocked(), fputwc_unlocked() ............................ put a wide character on a stream file putwchar() : put a wide character on a stream file .................................................................. see putwc(3C) putwchar_unlocked(): put a wide character on a stream file ................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description res_query() : resolver routines ............................................................................................ see resolver(3N) res_search() : resolver routines .......................................................................................... see resolver(3N) res_send() : resolver routines ..............................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description svc_fd_create(), svc_raw_create(), svc_tli_create(), svc_tp_create(), svc_vc_create() ............................................... library routines for the creation of server handles, rpc rpc_svc_err(3N): svcerr_auth(), svcerr_decode(), svcerr_noproc(), svcerr_noprog(), svcerr_progvers(), svcerr_systemerr(), svcerr_weakauth() .....................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description setcchar(3X): setcchar() ................................................ set cchar_t from a wide character and rendition setclock(3C): setclock() ................................................................................ set value of system-wide clock setdvagent : set device assignment database entry ...........................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description sigpause(3C): sigpause() .................................... atomically release blocked signals and wait for interrupt sigset(3C): sigset() , sighold() , sigrelse() , sigignore() , sigpause() ............. signal management sigsetjmp() : save signal mask if savemask is non-zero .........................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description SLPGetProperty(): SLP (Service Location Protocol) library routines ..................................... see libslp(3N) SLPGetRefreshInterval(): SLP (Service Location Protocol) library routines ...................... see libslp(3N) SLPOpen() : SLP (Service Location Protocol) library routines .................................................... see libslp(3N) SLPParseSrvURL(): SLP (Service Location Protocol) library routines ......
Table of Contents Volumes Six and Seven Entry Name(Section): name Description strtoumax() : convert string to integer .............................................................................. see strtoimax(3C) strtow() : convert string to floating-point number (extended) .................................................. see strtod(3C) strxfrm() : character string operations .................................................................................... see string(3C) subpad(3X): subpad() ........
Table of Contents Volumes Six and Seven Entry Name(Section): name Description tandq(): tangent function of a degree argument (quad) ............................................................. see tand(3M) tandw(): tangent function of a degree argument (extended) ...................................................... see tand(3M) tanf(): tangent function (float) .....................................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description truncf() : truncation function (float) ........................................................................................ see trunc(3M) truncl() : truncation function (long double) ............................................................................. see trunc(3M) truncq() : truncation function (quad) .......................................................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description ungetc_unlocked(): push character back into input stream ................................................ see ungetc(3S) ungetwc(3C): ungetwc() , ungetwc_unlocked() ............ push a wide character back into an input stream ungetwc_unlocked(): push a wide character back into an input stream ........................... see ungetwc(3C) unget_wch() : push a character onto the input queue ............................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description wborder() : draw borders from single-byte characters and renditions ....................................... see border(3X) wborder_set() : draw borders from complex characters and renditions ............................ see border_set(3X) WCHAR(): process 16-bit characters ................................................................................... see nl_tools_16(3X) WCHARADV() : process 16-bit characters .................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description winchstr() : input an array of single-byte characters and renditions from a window ............ see inchnstr(3X) winnstr() : input a multi-byte character string from a window .................................................. see innstr(3X) winnwstr() : input a string of wide characters from a window .................................................
Table of Contents Volumes Six and Seven Entry Name(Section): name Description xdr_bytes() : library routine for external data representation ................................... see xdr_complex(3N) xdr_callhdr() : XDR library routine for remote procedure calls ......................................... see rpc_xdr(3N) xdr_callmsg() : XDR library routine for remote procedure calls ......................................... see rpc_xdr(3N) xdr_char() : library routine for external data representation ...........
Table of Contents Volumes Six and Seven Entry Name(Section): name Description yp_get_default_domain() - Network Information Service client interface ............................ see ypclnt(3C) yp_master() - Network Information Service client interface ..................................................... see ypclnt(3C) yp_match() - Network Information Service client interface ....................................................... see ypclnt(3C) yp_next() - Network Information Service client interface .....
Table of Contents Volumes Six and Seven Entry Name(Section): name __uc_get_ar() : ucontext_t (user context) access ................................................................. __uc_get_ar_bsp(): ucontext_t (user context) access ........................................................ __uc_get_ar_bspstore(): ucontext_t (user context) access .............................................. __uc_get_ar_ccv(): ucontext_t (user context) access ........................................................
Section 3 Part 1 Library Functions A-M
Section 3 Part 1 Library Functions A-M
intro(3C) intro(3C) NAME intro - introduction to subroutines and libraries DESCRIPTION This section describes functions found in various libraries, other than those functions that directly invoke HP-UX system primitives, which are described in Section (2) of this volume.
intro(3C) intro(3C) /usr/lib/hpuxXX/libelf.so (For Itanium-based systems.) ELF 32-bit and 64-bit shared libraries. A A /usr/lib/libm.a (For PA-RISC systems.) SVID3, XPG4.2, and ANSI C compliant math archive library. /usr/lib/libm.sl (For PA-RISC systems.) SVID3, XPG4.2, and ANSI C compliant math archive library. /usr/lib/hpuxXX/libm.so (For Itanium-based systems.) SVID3, XPG4.2, and ANSI C compliant 32-bit and 64-bit math shared libraries.
a64l(3C) a64l(3C) NAME a64l( ), l64a( ) - convert between long integer and base-64 ASCII string SYNOPSIS #include long int a64l(const char *s); char *l64a(long int l); Obsolescent Interface A int l64a_r(long int l, char *buffer, int buflen); DESCRIPTION These functions are used to maintain numbers stored in base-64 ASCII characters. This is a notation by which long integers can be represented by up to six characters; each character represents a "digit" in a radix-64 notation.
abort(3C) abort(3C) NAME abort( ) - generate a software abort fault SYNOPSIS #include void abort(void); A aA DESCRIPTION abort() first closes all open files, streams, directory streams, and message catalogue descriptors, if possible, then causes the signal SIGABRT to be sent to the calling process. This may cause a core dump to be generated (see signal (2)). If the signal SIGABRT is caught, the handling function is executed.
abs(3C) abs(3C) NAME abs( ), labs( ) - return integer absolute value SYNOPSIS #include int abs(int i); long int labs(long int i); DESCRIPTION abs() returns the absolute value of its integer operand. A labs() is similar to abs(), except that the argument and the returned value each have type long int. The largest negative integer returns itself. WARNINGS In two’s-complement representation, the absolute value of the negative integer with largest magnitude is undefined.
aclsort(3C) aclsort(3C) NAME aclsort( ) - sort an Access Control List (JFS File Systems only) SYNOPSIS #include #include int aclsort(int nentries, int calclass, struct acl *aclbufp); A aA DESCRIPTION The aclsort() routine sorts JFS Access Control List (ACL) entries into the correct order to be accepted by the acl (2) system call.
aclsort(3C) aclsort(3C) SEE ALSO acl(2), aclv(5).
acltostr(3C) acltostr(3C) NAME acltostr( ) - convert access control list (ACL) structure to string form (HFS File Systems only) SYNOPSIS #include char *acltostr(int nentries, const struct acl_entry acl[], int form); Obsolescent Interface A aA int acltostr_r( int nentries, const struct acl_entry acl[], int form, char *strbuf, int length); Remarks: To ensure continued conformance with emerging industry standards, features described in this manual entry are likely to change in a future release.
acltostr(3C) acltostr(3C) fputs (acltostr (nentries, acl, FORM_SHORT), stdout); WARNINGS The value returned by acltostr() is a pointer into a buffer, the contents of which are overwritten by subsequent calls to acltostr() by the same thread. acltostr_r() is an obsolescent interface supported only for compatibility with existing DCE applications. New multithreaded applications should use acltostr(). DEPENDENCIES acltostr() is only supported on HFS file system on standard HP-UX operating system.
acos(3M) acos(3M) NAME acos( ), acosf( ), acosl( ), acosw( ), acosq( ) - arccosine functions SYNOPSIS #include double acos(double x); float acosf(float x); A aA Itanium(R)-based System Only long double acosl(long double x); extended acosw(extended x); quad acosq(quad x); DESCRIPTION acos() returns the arccosine of x, in the range 0 to π. acosf() is a float version of acos(); it takes a float argument and returns a float result.
acos(3M) acos(3M) STANDARDS CONFORMANCE acos() : SVID3, XPG4.
acosd(3M) acosd(3M) NAME acosd( ), acosdf( ), acosdl( ), acosdw( ), acosdq( ) - degree-valued arccosine functions SYNOPSIS #include double acosd(double x); float acosdf(float x); A aA Itanium(R)-based System Only long double acosdl(long double x); extended acosdw(extended x); quad acosdq(quad x); DESCRIPTION acosd() returns the degree-valued arccosine of x, in the range 0 to 180. acosdf() is a float version of acosd(); it takes a float argument and returns a float result.
acosh(3M) acosh(3M) NAME acosh( ), acoshf( ), acoshl( ), acoshw( ), acoshq( ) - arc hyperbolic cosine functions SYNOPSIS #include double acosh(double x); Itanium(R)-based System Only float acoshf(float x); A long double acoshl(long double x); extended acoshw(extended x); quad acoshq(quad x); DESCRIPTION acosh() returns the arc hyperbolic cosine of x, in the range +zero to +INFINITY.
addch(3X) addch(3X) (CURSES) NAME addch, mvaddch, mvwaddch, waddch — add a single-byte character and rendition to a window and advance the cursor SYNOPSIS #include
addchnstr(3X) addchnstr(3X) (ENHANCED CURSES) NAME addchnstr, mvaddchnstr, mvwaddchnstr, waddchnstr — add length limited string of single-byte characters and renditions to a window SYNOPSIS #include
addchstr(3X) addchstr(3X) (CURSES) NAME addchstr, mvaddchstr, mvwaddchstr, waddchstr — add string of single-byte characters and renditions to a window SYNOPSIS #include
addnstr(3X) addnstr(3X) (ENHANCED CURSES) NAME addnstr, addstr, mvaddnstr, mvaddstr, mvwaddnstr, mvwaddstr, waddnstr, waddstr - add a string of multi-byte characters without rendition to a window and advance cursor SYNOPSIS #include
addnwstr(3X) addnwstr(3X) (ENHANCED CURSES) NAME addnwstr, addwstr, mvaddnwstr, mvaddwstr, mvwaddnwstr, mvwaddwstr, waddnwstr, waddwstr — add a wide-character string to a window and advance the cursor SYNOPSIS #include
addsev(3C) addsev(3C) NAME addsev() - define additional severities for formatting routines SYNOPSIS #include int addsev(int sev, const char *sev_string); DESCRIPTION The addsev() routine allows the user to define additional severities to be used by formatting routines (see pfmt (3C)) in the standard message format. sev is the severity level. It must be between 5 and 255 inclusively. sev_string is a character string to be associated for this severity level.
add_wch(3X) add_wch(3X) (ENHANCED CURSES) NAME add_wch, mvadd_wch, mvwadd_wch, wadd_wch — add a complex character and rendition to a window SYNOPSIS #include
add_wchnstr(3X) add_wchnstr(3X) (ENHANCED CURSES) NAME add_wchnstr, add_wchstr, mvadd_wchnstr, mvadd_wchstr, mvwadd_wchnstr, mvwadd_wchstr, wadd_wchnstr, wadd_wchstr — add an array of complex characters and renditions to a window SYNOPSIS #include
annuity(3M) annuity(3M) (Itanium(R)-based System Only) NAME annuity( ), annuityf( ), annuityl( ), annuityw( ), annuityq( ) - present value factor for annuity SYNOPSIS #include
annuity(3M) annuity(3M) (Itanium(R)-based System Only) SEE ALSO compound(3M), exp(3M), expm1(3M), pow(3M), math(5). STANDARDS CONFORMANCE These functions are not specified by any standard.
asin(3M) asin(3M) NAME asin( ), asinf( ), asinl( ), asinw( ), asinq( ) - arcsine functions SYNOPSIS #include double asin(double x); float asinf(float x); A aA Itanium(R)-based System Only long double asinl(long double x); extended asinw(extended x); quad asinq(quad x); DESCRIPTION asin() returns the arcsine of x, in the range −π/2 to π/2. asinf() is a float version of asin(); it takes a float argument and returns a float result.
asin(3M) asin(3M) STANDARDS CONFORMANCE asin() : SVID3, XPG4.
asind(3M) asind(3M) NAME asind( ), asindf( ), asindl( ), asindw( ), asindq( ) - degree-valued arcsine functions SYNOPSIS #include double asind(double x); float asindf(float x); A aA Itanium(R)-based System Only long double asindl(long double x); extended asindw(extended x); quad asindq(quad x); DESCRIPTION asind() returns the degree-valued arcsine of x, in the range −90 to 90. asindf() is a float version of asind(); it takes a float argument and returns a float result.
asinh(3M) asinh(3M) NAME asinh( ), asinhf( ), asinhl( ), asinhw( ), asinhq( ) - arc hyperbolic sine functions SYNOPSIS #include double asinh(double x); Itanium(R)-based System Only float asinhf(float x); A long double asinhl(long double x); extended asinhw(extended x); quad asinhq(quad x); DESCRIPTION asinh() returns the arc hyperbolic sine of x. Itanium-based System Only asinhf() is a float version of asinh(); it takes a float argument and returns a float result.
assert(3X) assert(3X) NAME assert( ) - verify program assertion SYNOPSIS #include void assert(int expression); A aA DESCRIPTION This macro is useful for putting diagnostics into programs. When it is executed, if expression is false (zero), assert() prints: Assertion failed: expression , file xyz , line nnn on the standard error output and aborts. In the error message, xyz is the name of the source file and nnn the source line number of the assert() statement.
atan(3M) atan(3M) NAME atan( ), atanf( ), atanl( ), atanw( ), atanq( ) - arctangent functions SYNOPSIS #include double atan(double x); float atanf(float x); Itanium(R)-based System Only long double atanl(long double x); A extended atanw(extended x); quad atanq(quad x); DESCRIPTION atan() returns the arctangent of x, in the range −π/2 to π/2. atanf() is a float version of atan(); it takes a float argument and returns a float result.
atan2(3M) atan2(3M) NAME atan2( ), atan2f( ), atan2l( ), atan2w( ), atan2q( ) - arctangent and quadrant functions SYNOPSIS #include
atan2(3M) atan2(3M) If y is ±INFINITY and x is −INFINITY, atan2() returns ±3π/4 respectively. If y is ±INFINITY and x is +INFINITY, atan2() returns ±π/4 respectively. If x or y is NaN, atan2() returns NaN. Whether atan2() raises the inexact exception is unspecified. ERRORS No errors are defined. SEE ALSO acos(3M), asin(3M), atan(3M), atan2d(3M), carg(3M), cos(3M), sin(3M), tan(3M), math(5). A STANDARDS CONFORMANCE atan2() : SVID3, XPG4.
atan2d(3M) atan2d(3M) NAME atan2d( ), atan2df( ), atan2dl( ), atan2dw( ), atan2dq( ) - degree-valued arctangent-and-quadrant functions SYNOPSIS #include double atan2d(double y, double x); float atan2df(float y, float x); A aA Itanium(R)-based System Only long double atan2dl(long double y, long double x); extended atan2dw(extended y, extended x); quad atan2dq(quad y, quad x); DESCRIPTION atan2d() is a degree-valued version of the atan2() function.
atan2d(3M) atan2d(3M) ERRORS No errors are defined. SEE ALSO acosd(3M), asind(3M), atand(3M), atan2(3M), cosd(3M), sind(3M), tand(3M), math(5). STANDARDS CONFORMANCE These functions are not specified by any standard.
atand(3M) atand(3M) NAME atand( ), atandf( ), atandl( ), atandw( ), atandq( ) - degree-valued arctangent functions SYNOPSIS #include double atand(double x); float atandf(float x); A aA Itanium(R)-based System Only long double atandl(long double x); extended atandw(extended x); quad atandq(quad x); DESCRIPTION atand() returns the degree-valued arctangent of x, in the range −90 to 90. atandf() is a float version of atand(); it takes a float argument and returns a float result.
atanh(3M) atanh(3M) NAME atanh( ), atanhf( ), atanhl( ), atanhw( ), atanhq( ) - arc hyperbolic tangent functions SYNOPSIS #include double atanh(double x); Itanium(R)-based System Only float atanhf(float x); A long double atanhl(long double x); extended atanhw(extended x); quad atanhq(quad x); DESCRIPTION atanh() returns the arc hyperbolic tangent of x. Itanium-based System Only atanhf() is a float version of atanh(); it takes a float argument and returns a float result.
atexit(3) atexit(3) NAME atexit - register a function to be called at program termination SYNOPSIS #include int atexit(void (*func)(void)); DESCRIPTION A aA atexit() registers the function func to be called, without arguments, at normal program termination. Functions registered by atexit() are called in reverse order of registration. An atexit() call during exit processing is always unsuccessful. The number of registered functions should not exceed ATEXIT_MAX as specified in .
attroff(3X) attroff(3X) (CURSES) NAME attroff, attron, attrset, wattroff, wattron, wattrset — restricted window attribute control functions SYNOPSIS #include int attroff(int attrs); int attron(int attrs); int attrset(int attrs); A int wattroff(WINDOW *win, int attrs); int wattron(WINDOW *win, int attrs); int wattrset(WINDOW *win, int attrs); DESCRIPTION These functions manipulate the window attributes of the current or specified window.
attr_get(3X) attr_get(3X) (ENHANCED CURSES) NAME attr_get, attr_off, attr_on, attr_set, color_set, wattr_get, wattr_off, wattr_on, wattr_set, wcolor_set — window attribute control functions SYNOPSIS #include
basename(3C) basename(3C) NAME basename( ), dirname( ) - extract components of a path name SYNOPSIS #include char *basename(char *path); char *dirname(char *path); DESCRIPTION basename() takes the path name pointed to by path and returns a pointer to the final component of the path name, deleting any trailing ’/’ characters. If the string consists entirely of ’/’ characters, basename() returns a pointer to the string "/".
basename(3C) basename(3C) SEE ALSO basename(1), thread_safety(5). STANDARDS CONFORMANCE basename(): XPG4.2 dirname(): XPG4.
baudrate(3X) baudrate(3X) (CURSES) NAME baudrate — get terminal baud rate SYNOPSIS #include int baudrate(void); DESCRIPTION The baudrate() function extracts the output speed of the terminal in bits per second. RETURN VALUE The baudrate() function returns the output speed of the terminal. A ERRORS No errors are defined. SEE ALSO tcgetattr() (in the X/Open System Interfaces and Headers, Issue 4, Version 2 specification), . CHANGE HISTORY First released in X/Open Curses, Issue 2.
beep(3X) beep(3X) (CURSES) NAME beep — audible signal SYNOPSIS #include int beep(void); DESCRIPTION The beep() function alerts the user. It sounds the audible alarm on the terminal, or if that is not possible, it flashes the screen (visible bell). If neither signal is possible, nothing happens. A bA RETURN VALUE The beep() function always returns OK. ERRORS No errors are defined. APPLICATION USAGE Nearly all terminals have an audible alarm, but only some can flash the screen.
bgets(3G) bgets(3G) NAME bgets() - read stream up to next delimiter SYNOPSIS #include char *bgets (char *buffer , size_t *count , FILE *stream , const char *breakstring ); DESCRIPTION bgets reads characters from stream into buffer until either count is exhausted or one of the characters in breakstring is encountered in the stream. The read data is terminated with a null byte (’ \0’) and a pointer to the trailing null is returned.
bigcrypt(3C) bigcrypt(3C) NAME bigcrypt - generate hashing encryption on large strings SYNOPSIS #include #include char *bigcrypt(char *key, char *salt); DESCRIPTION bigcrypt() acts like crypt (3C), but handles much larger strings. bigcrypt takes the segments of A bA cleartext and encrypts them individually, at first using the salt passed in, and then using the first two characters of the previous encrypted segment as the salt for the next segment.
bindresvport(3N) bindresvport(3N) NAME bindresvport() - bind socket to privileged IP port SYNOPSIS #include #include int bindresvport(int sd, struct sockaddr_in *sin); DESCRIPTION The bindresvport() function binds a socket descriptor to a privileged IP port; that is, a port number in the range 0 to 1023. sd is a socket descriptor that was previously defined by a successful call to socket() (see socket (2)).
bkgd(3X) bkgd(3X) (ENHANCED CURSES) NAME bkgd, bkgdset, getbkgd, wbkgd, wbkgdset — set or get background character and rendition using a single-byte character SYNOPSIS #include int bkgd(chtype ch); void bkgdset(chtype ch); chtype getbkgd(WINDOW *win); A bA int wbkgd(WINDOW *win, chtype ch); void wbkgdset(WINDOW *win, chtype ch); DESCRIPTION The bkgdset() and wbkgdset() functions set the background property of the current or specified window based on the information in ch.
bkgrnd(3X) bkgrnd(3X) (ENHANCED CURSES) NAME bkgrnd, bkgrndset, getbkgrnd, wbkgrnd, wbkgrndset, wgetbkgrnd — set or get background character and rendition using a complex character SYNOPSIS #include
blmode(3C) blmode(3C) (OBSOLETED in Itanium(R)-based Systems) NAME blopen( ), blclose( ), blread( ), blget( ), blset( ) - terminal block-mode library interface SYNOPSIS #include int blopen(int fildes); int blclose(int bfdes); int blread(int bfdes, char *buf, size_t nbyte); A bA int blget(int bfdes, struct blmodeio *arg); int blset(int bfdes, const struct blmodeio *arg); DESCRIPTION This terminal library interface allows support of block-mode transfers with HP terminals.
blmode(3C) blmode(3C) (OBSOLETED in Itanium(R)-based Systems) Read Requests Read requests that receive data from block-mode transmissions do not return until the transmission is complete (the terminal has transmitted all characters). If the read is satisfied by byte count or if a data transmission error occurs, all subsequent data is discarded until the transmission is complete.
blmode(3C) blmode(3C) (OBSOLETED in Itanium(R)-based Systems) #define NBREPLY struct blmodeio unsigned long unsigned char unsigned char unsigned char unsigned char unsigned char char }; A bA 64 { cb_flags; cb_trig1c; cb_trig2c; cb_alertc; cb_termc; cb_replen; cb_reply[NBREPLY]; /* /* /* /* /* /* /* Modes */ First trigger */ Second trigger */ Alert character */ Terminating char */ cb_reply length */ optional reply */ The cb_flags field controls the basic block-mode protocol: CB_BMTRANS CB_OWNTERM 00
blmode(3C) blmode(3C) (OBSOLETED in Itanium(R)-based Systems) blopen() [ENOTTY] The file descriptor specified is not related to a terminal device. blclose() [ENOTTY] No previous blopen has been issued for the specified file descriptor. blread() [EDEADLK] A resource deadlock would occur as a result of this operation (see lockf (2)). [EFAULT] buf points outside the allocated address space. The reliable detection of this error is implementation dependent.
border(3X) border(3X) (ENHANCED CURSES) NAME border, wborder — draw borders from single-byte characters and renditions SYNOPSIS #include int border(chtype ls, chtype rs, chtype ts, chtype bs, chtype tl, chtype tr, chtype bl, chtype br); int wborder(WINDOW *win, chtype ls, chtype rs, chtype ts, chtype bs, chtype tl, chtype tr, chtype bl, chtype br); A bA DESCRIPTION The border() and wborder() functions draw a border around the edges of the current or specified window.
border_set(3X) border_set(3X) (ENHANCED CURSES) NAME border_set, wborder_set — draw borders from complex characters and renditions SYNOPSIS #include
box(3X) box(3X) (CURSES) NAME box — draw borders from single-byte characters and renditions SYNOPSIS #include int box(WINDOW *win, chtype verch, chtype horch); A bA DESCRIPTION The box() function draws a border around the edges of the specified window. This function does not advance the cursor position. This function does not perform special character processing. This function does not perform wrapping.
box_set(3X) box_set(3X) (ENHANCED CURSES) NAME box_set — draw borders from complex characters and renditions SYNOPSIS #include int box_set(WINDOW *win, const cchar_t *verch, const cchar_t *horch); DESCRIPTION The box_set() function draws a border around the edges of the specified window. This function does not advance the cursor position. This function does not perform special character processing. This function does not perform wrapping.
bsdproc(3C) bsdproc(3C) NAME killpg, getpgrp, setpgrp, sigvec, signal - 4.2 BSD-compatible process control facilities SYNOPSIS #include int killpg(int pgrp, int sig); int getpgrp(int pid); int setpgrp(int pid, int pgrp); A bA The following is now longer supported. See remarks below.
bsd_signal(3C) bsd_signal(3C) (TO BE OBSOLETED) NAME bsd_signal - simplified signal facilities SYNOPSIS #include void (*bsd_signal(int sig, void (*func)(int)))(int); DESCRIPTION The bsd_signal() function provides a partially compatible interface for programs written to historical system interfaces (see APPLICATION USAGE below). The function call bsd_signal(sig,func) has an effect as if implemented as: A void (*bsd_signal(int sig, void (*func)(int)))(int) { struct sigaction act, oact; act.
bsearch(3C) bsearch(3C) NAME bsearch( ) - binary search a sorted table SYNOPSIS #include A bA void *bsearch( const void *key, const void *base, size_t nel, size_t size, int (*compar)(const void *, const void *) ); DESCRIPTION bsearch() is a binary search routine generalized from Knuth (6.2.1) Algorithm B. It returns a pointer into a table indicating where a datum may be found. The table must be previously sorted in increasing order according to a provided comparison function.
bsearch(3C) bsearch(3C) node.string = str_space; while (scanf("%s", node.string) != EOF ) { node_ptr = (struct node *)bsearch((void *)(&node), (void *)table, TABSIZE , sizeof(struct node), node_compare); if (node_ptr != NULL ) { (void)printf("string = %20s, length = %d\n", node_ptr->string, node_ptr->length); } else { (void)printf("not found: %s\n", node.string); } } A } /* This routine compares two nodes based on an alphabetical ordering of the string field.
btowc(3C) btowc(3C) NAME btowc( ), wctob( ) - conversion between single-byte and wide-character SYNOPSIS #include #include wint_t btowc(int c); int wctob(wint_t c); A bA DESCRIPTION btowc() The btowc() function determines whether c constitutes a valid (one-byte) character in the initial shift state.
bufsplit(3G) bufsplit(3G) NAME bufsplit() - split buffer into fields SYNOPSIS #include size_t bufsplit(char *buf , size_t n , char **a ); DESCRIPTION bufsplit examines the buffer, buf , and assigns values to the pointer array, a, so that the pointers point to the first n fields in buf that are delimited by tabs or new-lines. To change the characters used to separate fields, call bufsplit with buf pointing to the string of characters, and n and a set to zero. For example, to use ’:’, ’.
bwtmps(3C) bwtmps(3C) NAME bwtmps: bwtmpname(), updatebwdb(), getbwent(), setbwent(), endbwent() - access and update routines for the wtmps and btmps databases SYNOPSIS #include void bwtmpname(char *file); int updatebwdb(struct utmps *utmps, size_t size); struct utmps * getbwent(size_t size); A bA void setbwent(void); void endbwent(void); DESCRIPTION getbwent() returns a pointer to a utmps structure.
bwtmps(3C) bwtmps(3C) not update /var/adm/wtmp and /var/adm/btmp files. bwtmps (3C) interfaces load shared library libuseracct.so.1/libuseracct.1. Compile/link for Archive Applications (PA-RISC only) If you use bwtmps (3C) interfaces and compile/link your application archive, please note that bwtmps (3C) interfaces have a dependency on libdld.sl that will require a change to the compile/link command: Compile : cc -Wl,-a,archive -Wl,-E -Wl,+n -l:libdld.
byteorder(3N) byteorder(3N) NAME htonl( ), htons( ), ntohl( ), ntohs( ) - convert values between host and network byte order SYNOPSIS #include _XOPEN_SOURCE_EXTENDED only #include unsigned long htonl(unsigned long hostlong); unsigned short htons(unsigned short hostshort); A bA unsigned long ntohl(unsigned long netlong); unsigned short ntohs(unsigned short netshort); DESCRIPTION These routines convert 16- and 32-bit quantities between network byte order and host byte order.
cabs(3M) cabs(3M) (Itanium(R)-based System Only) NAME cabs( ), cabsf( ), cabsl( ), cabsw( ), cabsq( ) - complex absolute value (also called norm, modulus, or magnitude) functions SYNOPSIS #include double cabs(double complex z); float cabsf(float complex z); long double cabsl(long double complex z); extended cabsw(extended complex z); quad cabsq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems. cabs() returns the complex absolute value of z.
cacos(3M) cacos(3M) (Itanium(R)-based System Only) NAME cacos( ), cacosf( ), cacosl( ), cacosw( ), cacosq( ) - complex arccosine functions SYNOPSIS #include double complex cacos(double complex z); float complex cacosf(float complex z); long double complex cacosl(long double complex z); extended complex cacosw(extended complex z); quad complex cacosq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
cacos(3M) cacos(3M) (Itanium(R)-based System Only) SEE ALSO acos(3M), ccos(3M), complex(5).
cacosh(3M) cacosh(3M) (Itanium(R)-based System Only) NAME cacosh( ), cacoshf( ), cacoshl( ), cacoshw( ), cacoshq( ) - complex arc hyperbolic cosine functions SYNOPSIS #include double complex cacosh(double complex z); float complex cacoshf(float complex z); long double complex cacoshl(long double complex z); extended complex cacoshw(extended complex z); quad complex cacoshq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
cacosh(3M) cacosh(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE cacosh(), cacoshf(), cacoshl() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−69 cA
can_change_color(3X) can_change_color(3X) (ENHANCED CURSES) NAME can_change_color, color_content, has_colors, init_color, init_pair, start_color, pair_content — color manipulation functions SYNOPSIS #include
can_change_color(3X) can_change_color(3X) (ENHANCED CURSES) User-De fined Colour Pairs Calling init_pair() defines or redefines colour-pair number pair to have foreground colour f and background colour b. Calling init_pair() changes any characters that were displayed in the colour pair’s old definition to the new definition and refreshes the screen. After defining the colour pair, the macro COLOR_PAIR(n) returns the value of colour pair n.
carg(3M) carg(3M) (Itanium(R)-based System Only) NAME carg( ), cargf( ), cargl( ), cargw( ), cargq( ) - complex argument (also called phase angle) functions SYNOPSIS #include double carg(double complex z); float cargf(float complex z); long double cargl(long double complex z); extended cargw(extended complex z); quad cargq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems. carg() returns the complex argument of z in the interval [-pi,+pi].
casin(3M) casin(3M) (Itanium(R)-based System Only) NAME casin( ), casinf( ), casinl( ), casinw( ), casinq( ) - complex arcsine functions SYNOPSIS #include double complex casin(double complex z); float complex casinf(float complex z); long double complex casinl(long double complex z); extended complex casinw(extended complex z); quad complex casinq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems.
casinh(3M) casinh(3M) (Itanium(R)-based System Only) NAME casinh( ), casinhf( ), casinhl( ), casinhw( ), casinhq( ) - complex arc hyperbolic sine functions SYNOPSIS #include double complex casinh(double complex z); float complex casinhf(float complex z); long double complex casinhl(long double complex z); extended complex casinhw(extended complex z); quad complex casinhq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
catan(3M) catan(3M) (Itanium(R)-based System Only) NAME catan( ), catanf( ), catanl( ), catanw( ), catanq( ) - complex arctangent functions SYNOPSIS #include double complex catan(double complex z); float complex catanf(float complex z); long double complex catanl(long double complex z); extended complex catanw(extended complex z); quad complex catanq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems.
catan(3M) catan(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE catan(), catanf(), catanl() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A cA Section 3−−76 Hewlett-Packard Company −2− HP-UX 11i Version 2: August 2003
catanh(3M) catanh(3M) (Itanium(R)-based System Only) NAME catanh( ), catanhf( ), catanhl( ), catanhw( ), catanhq( ) - complex arc hyperbolic tangent functions SYNOPSIS #include double complex catanh(double complex z); float complex catanhf(float complex z); long double complex catanhl(long double complex z); extended complex catanhw(extended complex z); quad complex catanhq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems.
catanh(3M) catanh(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE catanh(), catanhf(), catanh() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A cA Section 3−−78 Hewlett-Packard Company −2− HP-UX 11i Version 2: August 2003
catgets(3C) catgets(3C) NAME catgets( ) - get a program message SYNOPSIS #include char *catgets( nl_catd catd, int set_num, int msg_num, const char *def_str ); DESCRIPTION The catgets() function reads message msg_num in set set_num from the message catalog identified by catd, a catalog descriptor returned from a previous call to catopen() (see catopen (3C)). If the call fails, def_str points to a default message string returned by catgets().
catopen(3C) catopen(3C) NAME catopen( ), catclose( ) - open and close a message catalog for reading SYNOPSIS #include nl_catd catopen(const char *name, int oflag); int catclose(nl_catd catd); A cA DESCRIPTION The catopen() function opens a message catalog and returns a catalog descriptor. The name specifies the name of the message catalog being opened. A name containing a slash (/) specifies a path name for the message catalog.
catopen(3C) catopen(3C) _POSIX_NO_TRUNC is in effect. [ENFILE] The system file table is full. [ENOENT] The named catalog does not exist or the path is null. [ENOTDIR] A component of the path prefix is not a directory. catgets() can be used to provide default messages when called following a failed catopen() (see catgets (3C)). catgets() returns its def_str parameter if it is passed an invalid catalog descriptor.
cbreak(3X) cbreak(3X) (CURSES) NAME cbreak, nocbreak, noraw, raw — input mode control functions SYNOPSIS #include int cbreak(void); int nocbreak(void); int noraw(void); int raw(void); A cA DESCRIPTION The cbreak() function sets the input mode for the current terminal to cbreak mode and overrides a call to raw(). The nocbreak() function sets the input mode for the current terminal to Cooked Mode without changing the state of ISIG and IXON.
cbrt(3M) cbrt(3M) NAME cbrt( ), cbrtf( ), cbrtl( ), cbrtw( ), cbrtq( ) - cube root functions SYNOPSIS #include double cbrt(double x); float cbrtf(float x); Itanium(R)-based System Only long double cbrtl(long double x); extended cbrtw(extended x); quad cbrtq(quad x); A DESCRIPTION cbrt() computes the cube root of x. cbrtf() is a float version of cbrt(); it takes a float argument and returns a float result.
ccos(3M) ccos(3M) (Itanium(R)-based System Only) NAME ccos( ), ccosf( ), ccosl( ), ccosw( ), ccosq( ) - complex cosine functions SYNOPSIS #include double complex ccos(double complex z); float complex ccosf(float complex z); long double complex ccosl(long double complex z); extended complex ccosw(extended complex z); quad complex ccosq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems. ccos() returns the complex cosine of z.
ccos(3M) ccos(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE ccos(), ccosf(), ccosl() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−85 cA
ccosh(3M) ccosh(3M) (Itanium(R)-based System Only) NAME ccosh( ), ccoshf( ), ccoshl( ), ccoshw( ), ccoshq( ) - complex hyperbolic cosine functions SYNOPSIS #include double complex ccosh(double complex z); float complex ccoshf(float complex z); long double complex ccoshl(long double complex z); extended complex ccoshw(extended complex z); quad complex ccoshq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
ccosh(3M) ccosh(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE ccosh(), ccoshf(), ccoshf() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−87 cA
ceil(3M) ceil(3M) NAME ceil( ), ceilf( ), ceill( ), ceilw( ), ceilq( ) - ceiling functions SYNOPSIS #include double ceil(double x); Itanium(R)-based System Only float ceilf(float x); long double ceill(long double x); extended ceilw(extended x); A cA quad ceilq(quad x); DESCRIPTION The ceil() returns the smallest integer (represented as a double-precision number) not less than x.
cexp(3M) cexp(3M) (Itanium(R)-based System Only) NAME cexp( ), cexpf( ), cexpl( ), cexpw( ), cexpq( ) - complex exponential functions SYNOPSIS #include double complex cexp(double complex z); float complex cexpf(float complex z); long double complex cexpl(long double complex z); extended complex cexpw(extended complex z); quad complex cexpq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems. cexp() returns the complex base-e exponential of z.
cexp(3M) cexp(3M) (Itanium(R)-based System Only) SEE ALSO exp(3M), cis(3M), clog(3M), complex(5).
cfspeed(3C) cfspeed(3C) NAME cfgetospeed( ), cfsetospeed( ), cfgetispeed( ), cfsetispeed( ) - tty baud rate functions SYNOPSIS #include speed_t cfgetospeed(const struct termios *termios_p); int cfsetospeed(struct termios *termios_p, speed_t speed); speed_t cfgetispeed(const struct termios *termios_p); int cfsetispeed(struct termios *termios_p, speed_t speed); DESCRIPTION These functions set and get the input and output speed codes in the termios structure referenced by termios_p .
chgat(3X) chgat(3X) (ENHANCED CURSES) NAME chgat, mvchgat, mvwchgat, wchgat — change renditions of characters in a window SYNOPSIS #include
chownacl(3C) chownacl(3C) NAME chownacl( ) - change owner and/or group represented in a file’s access control list (ACL) (HFS File Systems only) SYNOPSIS #include void chownacl( int nentries, const struct acl_entry *acl, uid_t olduid, gid_t oldgid, uid_t newuid, gid_t newgid ); A Remarks: To ensure continued conformance with emerging industry standards, features described in this manual entry are likely to change in a future release.
chownacl(3C) chownacl(3C) #include int nentries; struct acl_entry acl [NACLENTRIES]; struct stat statbuf; if (stat ("oldfile", & statbuf) < 0) error (...); if ((nentries = getacl ("oldfile", NACLENTRIES, acl)) < 0) error (...); A chownacl (nentries, acl, statbuf.st_uid, statbuf.st_gid, geteuid(), getegid()); cA if (setacl ("newfile", nentries, acl)) error (...); DEPENDENCIES chownacl() is only supported on HFS file system on standard HP-UX operating system.
cimag(3M) cimag(3M) (Itanium(R)-based System Only) NAME cimag( ), cimagf( ), cimagl( ), cimagw( ), cimagq( ) - the imaginary part of a complex value SYNOPSIS #include double cimag(double complex z); float cimagf(float complex z); long double cimagl(long double complex z); extended cimagw(extended complex z); quad cimagq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems. cimag() returns the imaginary part of z (as a real).
cis(3M) cis(3M) (Itanium(R)-base System Only) NAME cis( ), cisf( ), cisl( ), cisw( ), cisq( ) - complex value with unit magnitude and given angle (specified in radians) SYNOPSIS #include double complex cis(double x); float complex cisf(float x); long double complex cisl(long double x); extended complex cisw(extended x); A cA quad complex cisq(quad x); DESCRIPTION These functions are available only for Itanium-based systems.
clear(3X) clear(3X) (CURSES) NAME clear, erase, wclear, werase — clear a window SYNOPSIS #include int clear(void); int erase(void); int wclear(WINDOW *win); int werase(WINDOW *win); DESCRIPTION The clear(), erase(), wclear() and werase() functions clear every position in the current or specified window.
clearenv(3C) clearenv(3C) NAME clearenv - clear the process environment SYNOPSIS #include int clearenv(void); DESCRIPTION clearenv() clears the process environment. No environment variables are defined immediately after a call to clearenv(). A cA clearenv() modifies the value of the pointer environ . This means that copies of that pointer are invalid after a call to clearenv().
clearok(3X) clearok(3X) (CURSES) NAME clearok, idlok, leaveok, scrollok, setscrreg, wsetscrreg — terminal output control functions SYNOPSIS #include int clearok(WINDOW *win, bool bf); int idlok(WINDOW *win, bool bf); int leaveok(WINDOW *win, bool bf); int scrollok(WINDOW *win, bool bf); int setscrreg(int top, int bot); int wsetscrreg(WINDOW *win, int top, int bot); A DESCRIPTION These functions set options that deal with output within Curses.
clearok(3X) clearok(3X) (CURSES) CHANGE HISTORY First released in X/Open Curses, Issue 2. X/Open Curses, Issue 4 The idlok(), leaveok(), scrollok(), setscrreq() and wsetscrreq() functions are merged with this entry. In previous issues, they appeared in entries of their own. The entry is rewritten for clarity. The DESCRIPTION of clearok() is updated to indicate that clearing of a screen applies if the flag is TRUE in either curscr or the specified window.
clock(3C) clock(3C) NAME clock( ) - report CPU time used SYNOPSIS #include clock_t clock(void); DESCRIPTION clock() returns the amount of CPU time (in microseconds) used since the first call to clock(). The time reported is the sum of the user and system times of the calling process and its terminated child processes for which it has executed wait() , system() or pclose() (see wait (2) , system (3S), and popen (3S)).
clog(3M) clog(3M) (Itanium(R)-based System Only) NAME clog( ), clogf( ), clogl( ), clogw( ), clogq( ) - complex natural (base-e) logarithm functions SYNOPSIS #include double complex clog(double complex z); float complex clogf(float complex z); long double complex clogl(long double complex z); extended complex clogw(extended complex z); quad complex clogq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
clog(3M) clog(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE clog(), clogf(), clogl() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−103 cA
clrtobot(3X) clrtobot(3X) (CURSES) NAME clrtobot, wclrtobot — clear from cursor to end of window SYNOPSIS #include int clrtobot(void); int wclrtobot(WINDOW *win); DESCRIPTION The clrtobot() and wclrtobot() functions erase all lines following the cursor in the current or specified window, and erase the current line from the cursor to the end of the line, inclusive. A cA RETURN VALUE Upon successful completion, these functions return OK. Otherwise, they return ERR.
clrtoeol(3X) clrtoeol(3X) (CURSES) NAME clrtoeol, wclrtoeol — clear from cursor to end of line SYNOPSIS #include int clrtoeol(void); int wclrtoeol(WINDOW *win); DESCRIPTION The clrtoeol() and wclrtoeol() functions erase the current line from the cursor to the end of the line, inclusive, in the current or specified window. A RETURN VALUE Upon successful completion, these functions return OK. Otherwise, they return ERR. ERRORS No errors are defined. SEE ALSO doupdate(3X), .
COLS(3X) COLS(3X) (ENHANCED CURSES) NAME COLS — number of columns on terminal screen SYNOPSIS #include extern int COLS; DESCRIPTION The external variable COLS indicates the number of columns on the terminal screen. SEE ALSO initscr(3X), . A cA CHANGE HISTORY First released in X/Open Curses, Issue 4.
compound(3M) compound(3M) (Itanium(R)-based System Only) NAME compound( ), compoundf( ), compoundl( ), compoundw( ), compoundq( ) - compound interest factor SYNOPSIS #include
confstr(3C) confstr(3C) NAME confstr( ) - get string-valued configuration values SYNOPSIS #include size_t confstr(int name, char *buf, size_t len); DESCRIPTION confstr() provides a method for applications to get configuration-defined string values. Its use and purpose are similar to sysconf() (see sysconf (2)), except that it is used where string values rather than numeric values are returned. A cA The name parameter can take on the following name values, which are defined in .
confstr(3C) confstr(3C) _CS_XBS5_ILP32_OFF32_LINTFLAGS The set of options to be given to the lint (1) utility to check application source using a programming model with 32-bit int, long, pointer, and off_t types. _CS_XBS5_ILP32_OFFBIG_CFLAGS The set of initial options to be given to the cc(1) and c89(1) utilities to build an application using a programming model with 32-bit int, long, and pointer types, and an off_t type using at least 64-bits.
confstr(3C) confstr(3C) If len is zero and buf is NULL, confstr() returns the integer value as defined below, but does not return a string. If len is zero but buf is not NULL, the result is unspecified. RETURN VALUE If name is invalid, confstr() returns zero and sets errno to [EINVAL]. If name does not have a configuration-defined value, confstr() returns 0 (zero) and leaves errno unchanged.
conj(3M) conj(3M) (Itanium(R)-based System Only) NAME conj( ), conjf( ), conjl( ), conjw( ), conjq( ) - complex conjugate functions SYNOPSIS #include double complex conj(double complex z); float complex conjf(float complex z); long double complex conjl(long double complex z); extended complex conjw(extended complex z); quad complex conjq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems.
conv(3C) conv(3C) NAME toupper( ), tolower( ), _toupper( ), _tolower( ), toascii( ) - translate characters SYNOPSIS #include int toupper(int c); int tolower(int c); int _toupper(int c); int _tolower(int c); int toascii(int c); A cA DESCRIPTION toupper() and tolower() have as domain the range of getc (3S): the integers from −1 through 255. If the argument of toupper() represents a lower-case letter, the result is the corresponding upper-case letter.
conv(3C) conv(3C) ... } EXTERNAL INFLUENCES Locale The LC_CTYPE category determines the translations to be done. International Code Set Support Single-byte character code sets are supported. AUTHOR conv() was developed by IBM, OSF, and HP. SEE ALSO ctype(3C), getc(3S), setlocale(3C), lang(5), thread_safety(5).
copylist(3G) copylist(3G) NAME copylist() - copy a file into memory SYNOPSIS #include char *copylist(const char *filenm , off_t *szptr ); DESCRIPTION copylist copies a list of items from a file into freshly allocated memory, replacing new-lines with null characters. It expects two arguments: a pointer filenm to the name of the file to be copied, and a pointer szptr to a variable where the size of the file will be stored. A cA Upon success, copylist returns a pointer to the memory allocated.
copysign(3M) copysign(3M) NAME copysign( ), copysignf( ), copysignl( ), copysignw( ), copysignq( ) - copysign functions SYNOPSIS #include double copysign(double x, double y); float copysignf(float x, float y); Itanium(R)-based System Only long double copysignl(long double x, long double y); extended copysignw(extended x, extended y); A quad copysignq(quad x, quad y); DESCRIPTION The copysign() function returns x with its sign changed to the sign of y.
copywin(3X) copywin(3X) (CURSES) NAME copywin — copy a region of a window SYNOPSIS #include int copywin(const WINDOW *srcwin, WINDOW *dstwin, int sminrow, int smincol, int dminrow, int dmincol, int dmaxrow, int dmaxcol, int overlay); A cA DESCRIPTION The copywin() function provides a finer granularity of control over the overlay() and overwrite() functions.
cos(3M) cos(3M) NAME cos( ), cosf( ), cosl( ), cosw( ), cosq( ) - cosine functions SYNOPSIS #include double cos(double x); float cosf(float x); Itanium(R)-based System Only long double cosl(long double x); extended cosw(extended x); quad cosq(quad x); A DESCRIPTION cos() returns the cosine of x (x specified in radians). On PA-RISC systems, cos() may lose accuracy when x is far from zero. cosf() is a float version of cos(); it takes a float argument and returns a float result.
cos(3M) cos(3M) cosf(), cosl() : ISO/IEC C99 (including Annex F, ‘‘IEC 60559 floating-point arithmetic’’) A cA Section 3−−118 Hewlett-Packard Company −2− HP-UX 11i Version 2: August 2003
cosd(3M) cosd(3M) NAME cosd( ), cosdf( ), cosdl( ), cosdw( ), cosdq( ) - cosine functions of an argument specified in degrees SYNOPSIS #include double cosd(double x); float cosdf(float x); Itanium(R)-based System Only long double cosdl(long double x); extended cosdw(extended x); quad cosdq(quad x); A DESCRIPTION cosd() returns the cosine of x (x specified in degrees). On PA-RISC systems, cosd() may lose accuracy when x is far from zero.
cosh(3M) cosh(3M) NAME cosh( ), coshf( ), coshl( ), coshw( ), coshq( ) - hyperbolic cosine functions SYNOPSIS #include double cosh(double x); float coshf(float x); Itanium(R)-based System Only long double coshl(long double x); extended coshw(extended x); A cA quad coshq(quad x); DESCRIPTION cosh() returns the hyperbolic cosine of x. coshf() is a float version of cosh(); it takes a float argument and returns a float result.
cpacl(3C) cpacl(3C) NAME cpacl( ), fcpacl( ) - copy the access control list (ACL) and mode bits from one file to another (HFS and JFS File Systems only) SYNOPSIS #include
cpacl(3C) A cA cpacl(3C) −1 Unable to perform acl() or getacl() (fgetacl()) on a local fromfile (fromfd ). −2 Unable to perform chmod() (fchmod()) on tofile (tofd ) to set its file miscellaneous mode bits. cpacl() (fcpacl()) attempts this regardless of whether a file is local or remote, as long as fromfile (fromfd ) is local. −3 Unable to perform acl() or setacl() (fsetacl()) on a local tofile (tofd ).
cpow(3M) cpow(3M) (Itanium(R)-based System Only) NAME cpow( ), cpowf( ), cpowl( ), cpoww( ), cpowq( ) - complex power functions SYNOPSIS #include
cproj(3M) cproj(3M) (Itanium(R)-based System Only) NAME cproj( ), cprojf( ), cprojl( ), cprojw( ), cprojq( ) - functions that project all infinities onto the one on the positive real axis SYNOPSIS #include
creal(3M) creal(3M) (Itanium(R)-based System Only) NAME creal( ), crealf( ), creall( ), crealw( ), crealq( ) - the real part of a complex value SYNOPSIS #include double creal(double complex z); float crealf(float complex z); long double creall(long double complex z); extended crealw(extended complex z); quad crealq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems. creal() returns the real part of z.
crt0(3) crt0(3) NAME crt0.o - execution startup routines DESCRIPTION The C, aC++, and FORTRAN compilers link in the object file crt0.o for statically-bound programs to provide startup capabilities and environments for program execution. It contains startup code that must be linked using ld(1) to every statically-bound program. In a dynamically linked program (the default method), the crt0.o object file is not used, and all actions normally associated with it are instead done by the dynamic loader dld.
crypt(3C) crypt(3C) NAME crypt - generate hashing encryption SYNOPSIS #include #include char *crypt(const char *key, const char *salt); Obsolescent Interfaces char *crypt_r(const char *key, const char *salt, CRYPTD *cd); void setkey_r(const char *key, CRYPTD *cd); void encrypt_r(char block[64], int edflag, CRYPTD *cd); A void setkey(const char *key); void encrypt(char block[64], int edflag); DESCRIPTION crypt( ): crypt() is the password encryption function.
cr_close(3) cr_close(3) NAME cr_close - close a crash dump descriptor SYNOPSIS #include int cr_close(CRASH *crash_cb); DESCRIPTION The cr_close() function closes the crash dump descriptor structure pointed to by crash_cb . The crash_cb structure is a crash dump descriptor filled in by a cr_open (3) call. All associated resources (memory and files) are released. A cA RETURN VALUE Returns zero for success. Other possible return values are described in libcrash (5).
cr_info(3) cr_info(3) NAME cr_info - retrieve crash dump information SYNOPSIS #include cr_info_t *cr_info(CRASH *crash_cb); DESCRIPTION The cr_info() function returns a pointer to a cr_info_t structure with information about an open crash dump. cr_info_t The cr_info_t structure contains the following fields. Note that there is no necessary correlation between the placement in this list and the order in the structure, and the structure may contain other, reserved fields.
cr_info(3) cr_info(3) #include CRASH *crshdes; cr_info_t *cri; cri = cr_info(crshdes); AUTHOR cr_info() was developed by HP. SEE ALSO cr_open(3), libcrash(5).
cr_isaddr(3) cr_isaddr(3) NAME cr_isaddr - validate whether physical page number was dumped SYNOPSIS #include int cr_isaddr(CRASH *crash_cb, uint64_t pagenum, int *avail); DESCRIPTION The cr_isaddr() checks to see if the specified page number, pagenum , is present in the open crash dump represented by crash_cb . It sets the Boolean to which avail points to indicate the presence (1) or absence (0) of the page. RETURN VALUE Returns zero for success.
cr_open(3) cr_open(3) NAME cr_open() - open crash dump for reading SYNOPSIS #include int cr_open(const char *path, CRASH **crash_cb, int flags); DESCRIPTION The cr_open() library call opens a crash dump and passes back a crash dump descriptor. The path argument points to a path name naming a crash dump directory or file, and must not exceed PATH_MAX bytes in length.
cr_perror(3) cr_perror(3) NAME cr_perror - print a libcrash error or warning message SYNOPSIS #include void cr_perror(CRASH *crash_cb, int error); DESCRIPTION cr_perror() prints to standard error an error or warning message corresponding to error , which should be the return value from an immediately previous call to one of the libcrash calls. The message describes the problem that occurred, explains its implications when appropriate, and gives corrective action where appropriate.
cr_read(3) cr_read(3) NAME cr_read - read from crash dump SYNOPSIS #include int cr_read(CRASH *crash_cb, void *buf, uint64_t mem_page, int *num_pages); DESCRIPTION The cr_read() function attempts to read the memory area defined by mem_page and num_pages into the buffer pointed to by buf from the crash dump opened using crash_cb . A cA The cr_read() starts at the position in the crash dump associated with the physical memory offset given by mem_page .
cr_set_node(3) cr_set_node(3) NAME cr_set_node - set node number SYNOPSIS #include int cr_set_node(CRASH *crash_cb, int node_num, int *old_node_num); DESCRIPTION The cr_set_node() function expects the physical node number passed in node_num. The node number will be used by cr_read() and cr_isaddr() to access the node private memory contained on a particular node. This function is only valid for ccnumadir (version 4) dumps.
cr_uncompress(3) cr_uncompress(3) NAME cr_uncompress - uncompress a file in a crash dump SYNOPSIS #include int cr_uncompress(CRASH *crash_cb, const char *pathname, uint64_t size, uint64_t checksum); DESCRIPTION The cr_uncompress() ensures that a file, part of a crash dump described by crash_cb , is uncompressed and matches its expected size and checksum (as computed by cksum(1)).
cr_verify(3) cr_verify(3) NAME cr_verify - verify integrity of crash dump SYNOPSIS #include int cr_verify(CRASH *crash_cb, int flags); DESCRIPTION cr_verify() uncompresses and verifies the sizes and checksums of every file in the crash dump identified by crash_cb . flags is a bitmask of zero or more of the following flag values: CR_NOCHECKSUM cr_verify() will not attempt to verify checksums of files in the crash dump if this flag is set. Only sizes will be verified.
csin(3M) csin(3M) (Itanium(R)-based System Only) NAME csin( ), csinf( ), csinl( ), csinw( ), csinq( ) - complex sine functions SYNOPSIS #include double complex csin(double complex z); float complex csinf(float complex z); long double complex csinl(long double complex z); extended complex csinw(extended complex z); quad complex csinq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems. csin() returns the complex sine of z.
csin(3M) csin(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE csin(), csinf(), csinl() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−139 cA
csinh(3M) csinh(3M) (Itanium(R)-based System Only) NAME csinh( ), csinhf( ), csinhl( ), csinhw( ), csinhq( ) - complex hyperbolic sine functions SYNOPSIS #include double complex csinh(double complex z); float complex csinhf(float complex z); long double complex csinhl(long double complex z); extended complex csinhw(extended complex z); quad complex csinhq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
csinh(3M) csinh(3M) (Itanium(R)-based System Only) STANDARDS CONFORMANCE csinh(), csinhf(), csinhl() : ISO/IEC C99 (including Annex G, ‘‘IEC 60559-compatible complex arithmetic’’) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−141 cA
csqrt(3M) csqrt(3M) (Itanium(R)-based System Only) NAME csqrt( ), csqrtf( ), csqrtl( ), csqrtw( ), csqrtq( ) - complex square root functions SYNOPSIS #include double complex csqrt(double complex z); float complex csqrtf(float complex z); long double complex csqrtl(long double complex z); extended complex csqrtw(extended complex z); quad complex csqrtq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
ctan(3M) ctan(3M) (Itanium(R)-based System Only) NAME ctan( ), ctanf( ), ctanl( ), ctanw( ), ctanq( ) - complex tangent functions SYNOPSIS #include double complex ctan(double complex z); float complex ctanf(float complex z); long double complex ctanl(long double complex z); extended complex ctanw(extended complex z); quad complex ctanq(quad complex z); A DESCRIPTION These functions are available only for Itanium-based systems. ctan() returns the complex tangent of z.
ctanh(3M) ctanh(3M) (Itanium(R)-based System Only) NAME ctanh( ), ctanhf( ), ctanhl( ), ctanhw( ), ctanhq( ) - complex hyperbolic tangent functions SYNOPSIS #include double complex ctanh(double complex z); float complex ctanhf(float complex z); long double complex ctanhl(long double complex z); extended complex ctanhw(extended complex z); quad complex ctanhq(quad complex z); A cA DESCRIPTION These functions are available only for Itanium-based systems.
ctermid(3S) ctermid(3S) NAME ctermid( ) - generate file name for terminal SYNOPSIS #include char *ctermid(char *s); DESCRIPTION ctermid() generates a string that, when used as a pathname, refers to the the controlling terminal for the current process. If s is a NULL pointer, the string is stored in an internal static area, the contents of which are overwritten at the next call to ctermid(), and the address of which is returned.
ctime(3C) ctime(3C) NAME ctime( ), ctime_r( ), localtime( ), localtime_r( ), gmtime( ), gmtime_r( ), mktime( ), difftime( ), asctime( ), asctime_r( ), timezone( ), daylight( ), tzname( ), tzset( ) - convert date and time to string SYNOPSIS #include
ctime(3C) ctime(3C) The minimum date supported by gmtime() in both 32-bit and 64-bit HP-UX is Friday December 13 20:45:52 UTC 1901. The maximum dates supported by gmtime() are Tuesday January 19 03:14:07 UTC 2038 and Friday December 31 23:59:59 UTC 9999 in 32-bit HP-UX and 64-bit HP-UX, respectively. In 64-bit HP-UX, gmtime() returns NULL and sets errno to ERANGE if timer is less than the number of seconds that corresponds to the minimum date supported (i.e., INT_MIN, as defined in limits.
ctime(3C) ctime(3C) 1) if the environment variable TZ is present, it takes precedence. 2) if TZ is not present, then the value contained in /etc/default/tz is used for the default. 3) if /etc/default/tz is not set then the default value is equivalent to EST5EDT (Eastern Standard Time) of the USA. /etc/default/tz can be modified for an appropriate default value for timezone. The header file contains declarations of all relevant functions and externals.
ctime(3C) ctime(3C) include accumulated leap seconds. The tm structure generated by localtime() and gmtime() will never reflect any leap seconds. Upon successful completion, mktime() forces the value of the tm_sec component to the range [0,59]. AUTHOR ctime() was developed by AT&T and HP. SEE ALSO time(2), getdate(3C), thread_safety(5). setlocale(3C), strftime(3C), tztab(4), environ(5), lang(5), langinfo(5), STANDARDS CONFORMANCE ctime(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.
ctype(3C) ctype(3C) NAME isalpha( ), isupper( ), islower( ), isdigit( ), isxdigit( ), isalnum( ), isspace( ), ispunct( ), isprint( ), isgraph( ), iscntrl( ), isascii( ) - classify characters SYNOPSIS #include
ctype(3C) ctype(3C) WARNINGS These functions are supplied both as library functions and as macros defined in the header. Normally, the macro versions are used. To obtain the library function, either use a #undef to remove the macro definition or, if compiling in ANSI-C mode, enclose the function name in parenthesis or take its address. The following example uses the library functions for isalpha(), isdigit(), and isspace(): #include #undef isalpha ... main() { int (*ctype_func)(); ..
curscr(3X) curscr(3X) (ENHANCED CURSES) NAME curscr — current window SYNOPSIS #include extern WINDOW *curscr; DESCRIPTION The external variable curscr points to an internal data structure. It can be specified as an argument to certain functions, such as clearok(), where permitted in this specification. A cA SEE ALSO clearok(3X), . CHANGE HISTORY First released in X/Open Curses, Issue 4.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) NAME curses( ) - Terminal and printer handling and optimization package DESCRIPTION Use and Implementation of Interfaces These routines provide a method for updating screens with reasonable optimization in a terminal independent manner. Each of the following statements applies unless explicitly stated otherwise in the detailed descriptions that follow.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) visible all library functions ENHANCED CURSES. referenced in this specification and labelled An application that uses any API specified as ENHANCED CURSES must define _XOPEN_SOURCE_EXTENDED = 1 in each source file or as part of its compilation environment. When _XOPEN_SOURCE_EXTENDED = 1 is defined in a source file, it must appear before any header is included.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) No other identifiers are reserved. Applications must not declare or define identifiers with the same name as an identifier reserved in the same context. Since macro names are replaced whenever found, independent of scope and name space, macro names matching any of the reserved identifier names must not be defined if any associated header is included.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) WINDOW An opaque window representation. Interface Overview Components A Curses initialisation function, usually initscr(), determines the terminal model in use, by reference to either an argument or an environment variable. If that model is defined in terminfo, then the same terminfo entry tells Curses exactly how to operate the terminal. In this case, a comprehensive API lets the application perform terminal operations.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Ancestors The term ancestor refers to a window’s parent, or its parent, or so on. Derived Windows Derived windows are subwindows whose position is defined by reference to the parent window rather than in absolute screen coordinates. Derived windows are otherwise no different from subwindows. Pads A pad is a specialised case of subwindow that is not necessarily associated with a viewable part of a screen.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) If a given terminal does not support a rendition that an application program is trying to use, Curses may substitute a different rendition for it. Colours are always used in pairs (referred to as colour-pairs). A colour-pair consists of a foreground colour (for characters) and a background colour (for the field on which the characters are displayed).
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Window Background Each window has a background property. The background property specifies: • A spacing complex character (the background character) that will be used in a variety of situations where visible information is deleted from the screen. • A rendition to use in displaying the background character in those situations, and in other situations specified in Rendition of Characters Placed into a Window in curses_intro.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Insertion Insertion functions (such as insch()) insert characters immediately before the character at the specified or implied cursor position. The insertion shifts all characters that were formerly at or beyond the cursor position on the cursor line toward the end of that line.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) the cursor movement specified below does not persist in the visible cursor beyond the end of the operation. In functions that do move the cursor, these special characters can be used to affect the placement of subsequent characters and to achieve movement of the visible cursor.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) The complete set of key codes for keypad keys that Curses can process is specified by the constants defined in whose names begin with ‘‘KEY_’’. Each terminal type described in the terminfo database may support some or all of these key codes. The terminfo database specifies the sequence of input characters from the terminal type that correspond to each key code (see Keypad in terminfo (4)).
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Input Mode Cooked Mode Effect This achieves normal line-at-a-time processing with all special characters handled outside the application. This achieves the same effect as canonical-mode input processing as specified in the X/Open System Interface Definitions, Issue 4, Version 2 specification . The state of the ISIG and IXON flags are not changed upon entering this mode by calling cbreak(), and are set upon entering this mode by calling noraw().
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Echo Processing Echo mode determines whether Curses echoes typed characters to the screen. The effect of Echo mode is analogous to the effect of the ECHO flag in the local mode field of the termios structure associated with the terminal device connected to the window. However, Curses always clears the ECHO flag while it is operating, to inhibit the operating system from performing echoing.
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Function Families Provided Function Names Description Add (Overwrite) [mv][w]addch(3X) add a character [mv][w]addch[n]str(3X) add a character string [mv][w]add[n]str(3X) add a string [mv][w]add[n]wstr(3X) add a wide character string [mv][w]add_wch(3X) add a wide character and rendition [mv][w]add_wch[n]str(3X) add an array of wide characters and renditions Change Renditions [mv][w]chgat(3X) change renditions of characters in a window Delete [mv][w]delch(3
curses_intro(3X) curses_intro(3X) (X/Open CURSES) Initialised Curses Environment Before executing an application that uses Curses, the terminal must be prepared as follows: • If the terminal has hardware tab stops, they should be set. • Any initialisation strings defined for the terminal must be output to the terminal. The resulting state of the terminal must be compatible with the model of the terminal that Curses has, as reflected in the terminal’s entry in the terminfo database (see terminfo (4)).
curs_set(3X) curs_set(3X) (ENHANCED CURSES) NAME curs_set — set the cursor mode SYNOPSIS #include int curs_set(int visibility); DESCRIPTION The curs_set() function sets the appearance of the cursor based on the value of visibility : Value of visibility 0 1 2 Appearance of Cursor Invisible Terminal-specific normal mode Terminal-specific high visibility mode A The terminal does not necessarily support all the above values.
cur_term(3X) cur_term(3X) (ENHANCED CURSES) NAME cur_term — current terminal information SYNOPSIS #include extern TERMINAL *cur_term; DESCRIPTION The external variable cur_term identifies the record in the terminfo database associated with the terminal currently in use. A cA SEE ALSO del_curterm(3X), tigetflag(3X), . CHANGE HISTORY First released in X/Open Curses, Issue 4.
cuserid(3S) cuserid(3S) (TO BE OBSOLETED) NAME cuserid( ) - get character login name of the user SYNOPSIS #include char *cuserid(char *s); Remarks: Because this function behaved differently in previous releases of HP-UX, and behaves differently on other systems, its use is not recommended. It is provided only for conformance to current industry standards, and is subject to withdrawal in future releases of HP-UX.
datalock(3C) datalock(3C) NAME datalock( ) - lock process into memory after allocating data and stack space SYNOPSIS #include int datalock(size_t datsiz, size_t stsiz); DESCRIPTION datalock() allocates at least datsiz bytes of data space and stsiz bytes of stack space, then locks the program in memory. The data space is allocated by malloc() (see malloc (3C)). After the program is locked, this space is released by free() (see malloc (3C)), making it available for use.
dbm(3C) dbm(3C) NAME dbminit, fetch, store, delete, firstkey, nextkey, dbmclose - database subroutines SYNOPSIS #include int dbminit(const char *file); datum fetch(datum key); int store(datum key, datum content); int delete(datum key); datum firstkey(void); datum nextkey(datum key); int dbmclose(void); A DESCRIPTION These functions maintain key/content pairs in a database.
dbm(3C) dbm(3C) A store or delete during a pass through the keys by firstkey and nextkey may yield unexpected results. AUTHOR dbm(3C) was developed by the University of California, Berkeley. SEE ALSO ndbm(3X).
def_prog_mode(3X) def_prog_mode(3X) (CURSES) NAME def_prog_mode, def_shell_mode, reset_prog_mode, reset_shell_mode — save or restore program or shell terminal modes SYNOPSIS #include int def_prog_mode(void); int def_shell_mode(void); int reset_prog_mode(void); int reset_shell_mode(void); DESCRIPTION The def_prog_mode() function saves the current terminal modes as the ‘‘program’’ (in Curses) state for use by reset_prog_mode().
delay_output(3X) delay_output(3X) (CURSES) NAME delay_output — delay output SYNOPSIS #include int delay_output(int ms); DESCRIPTION On terminals that support pad characters, delay_output() pauses the output for at least ms milliseconds. Otherwise, the length of the delay is unspecified. RETURN VALUE Upon successful completion, delay_output() returns OK. Otherwise, it returns ERR. A dA ERRORS No errors are defined.
delch(3X) delch(3X) (CURSES) NAME delch, mvdelch, mvwdelch, wdelch — delete a character from a window. SYNOPSIS #include int delch(void); int mvdelch(int y, int x); int mvwdelch(WINDOW *win, int y, int x); int wdelch(WINDOW *win); DESCRIPTION These functions delete the character at the current or specified position in the current or specified window. This function does not change the cursor position. RETURN VALUE Upon successful completion, these functions return OK.
deleteln(3X) deleteln(3X) (CURSES) NAME deleteln, wdeleteln — delete lines in a window SYNOPSIS #include int deleteln(void); int wdeleteln(WINDOW *win); DESCRIPTION The deleteln() and wdeleteln() functions delete the line containing the cursor in the current or specified window and move all lines following the current line one line toward the cursor. The last line of the window is cleared. The cursor position does not change.
delscreen(3X) delscreen(3X) (CURSES) NAME delscreen — free storage associated with a screen SYNOPSIS #include void delscreen(SCREEN *sp); DESCRIPTION The delscreen() function frees storage associated with the SCREEN pointed to by sp. RETURN VALUE The delscreen() function does not return a value. ERRORS No errors are defined. A SEE ALSO endwin(3X), initscr(3X), . CHANGE HISTORY First released in X/Open Curses, Issue 4.
delwin(3X) delwin(3X) (CURSES) NAME delwin — delete a window SYNOPSIS #include int delwin(WINDOW *win); DESCRIPTION The delwin() function deletes win, freeing all memory associated with it. The application must delete subwindows before deleting the main window. RETURN VALUE Upon successful completion, delwin() returns OK. Otherwise, it returns ERR. A dA ERRORS No errors are defined. SEE ALSO derwin(3X), dupwin(3X), . CHANGE HISTORY First released in X/Open Curses, Issue 2.
del_curterm(3X) del_curterm(3X) (ENHANCED CURSES) NAME del_curterm, restartterm, set_curterm, setupterm — interfaces to the terminfo database SYNOPSIS #include int del_curterm(TERMINAL *oterm); int restartterm(char *term, int fildes, int *errret); TERMINAL *set_curterm(TERMINAL *nterm); int setupterm(char *term, int fildes, int *errret); extern TERMINAL *cur_term; DESCRIPTION These functions retrieve information from the terminfo database.
del_curterm(3X) del_curterm(3X) (ENHANCED CURSES) SEE ALSO baudrate(3X), erasechar(3X), has_ic(3X), longname(3X), putc(3S), termattrs(3X), termname(3X), tgetent(3X), tigetflag(3X), use_env(3X), terminfo(4), see section Selecting a Terminal, . CHANGE HISTORY First released in X/Open Curses, Issue 4.
derwin(3X) derwin(3X) (CURSES) NAME derwin - relative window creation function SYNOPSIS #include WINDOW *derwin(WINDOW int begin_x); *orig, int nlines, int ncols, int begin_y, DESCRIPTION The derwin() function creates a new window with nlines lines and ncols columns, positioned so that the origin is at (begin_y, begin_x) relative to the origin of the window orig. If any part of the new window is outside orig, the function fails and the window is not created.
devnm(3) devnm(3) NAME devnm - map device ID to file path SYNOPSIS #include int devnm ( mode_t devtype, dev_t devid, char *path, size_t pathlen, int cache ); A dA DESCRIPTION Given a device type, a device ID, and a string in which to return the result, devnm() maps the type and ID to a block or character special file (device file) name by searching /dev. It returns in path the full path name of the first special file encountered with a matching device type and ID.
devnm(3) devnm(3) SEE ALSO devnm(1M), stat(2), ftw(3C), malloc(3C), ttyname(3C), stat(5), thread_safety(5).
dial(3C) dial(3C) NAME dial(), undial() - establish an outgoing terminal line connection SYNOPSIS #include int dial(CALL call); void undial(int fd); DESCRIPTION The dial() function returns a file descriptor for a terminal line open for read/write. The argument to dial() is a CALL structure (defined in the header file).
dial(3C) dial(3C) Permissible Codes 0-9 dial 0-9 * or : dial * # or ; dial # - 4-second delay for second dial tone e or < end-of-number w or = wait for secondary dial tone f flash off hook for 1 second modem Specifies modem control for direct lines. Set to non-zero if modem control is required. attr Pointer to a termio structure, as defined in the header file.
directory(3C) directory(3C) NAME opendir( ), readdir( ), readdir_r( ), telldir( ), seekdir( ), rewinddir( ), closedir( ) - directory operations SYNOPSIS #include
directory(3C) directory(3C) telldir() upon successful completion, returns a long value indicating the current position in the directory. Otherwise it returns -1 and sets errno to indicate the error. seekdir() does not return any value, but if an error is encountered, errno is set to indicate the error. closedir() upon successful completion, returns a value of 0. Otherwise, it returns a value of -1 and sets errno to indicate the error.
directory(3C) directory(3C) return FOUND; } } (void) closedir(dirp); return NOT_FOUND; WARNINGS readdir() and getdirentries() (see getdirentries(2)) are the only ways to access remote NFS directories. Attempting to read a remote directory via NFS by using read() returns -1 and sets errno to [EISDIR] (see read (2)). For 32-bit applications, the d_ino field of the dirent struct may overflow for filesystems that use 64-bit values.
div(3C) div(3C) NAME div( ), ldiv( ) - integer division and remainder SYNOPSIS #include div_t div(int numer, int denom); ldiv_t ldiv(long int numer, long int denom); DESCRIPTION div() ldiv() Computes the quotient and remainder of the division of the numerator numer by the denominator denom.
dladdr(3C) dladdr(3C) NAME dladdr - get the symbolic information for an address. SYNOPSIS cc [flag ... ] cfile ... -ldl [library ] ... #include int dladdr(void *address, Dl_info *dlip); A dA DESCRIPTION dladdr is one of a family of routines that give the user direct access to the dynamic linking facilities (using the -ldl option on the compiler or ld command line). dladdr allows a process to obtain information about the symbol that most closely defines a given address .
dladdr(3C) dladdr(3C) For a.out’s, only a subset of externally visible symbols are typically exported: specifically those referenced by the load modules with which the a.out is linked. The exact set of exported symbols for any shared library or the a.out can be controlled using the linker (see ld(1)). SEE ALSO cc(1), ld(1), sh(1), exec(2), dlclose(3C), dlerror(3C), dlsym(3C).
dlclose(3C) dlclose(3C) NAME dlclose - close a shared library SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include int dlclose(void *handle); A dA DESCRIPTION dlclose is one of a family of routines that give the user direct access to the dynamic linking facilities (using the -ldl option on the compiler or ld command line). dlclose disassociates a shared object previously opened by dlopen from the current process.
dlerror(3C) dlerror(3C) NAME dlerror - get diagnostic information SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include char *dlerror(void); DESCRIPTION dlopen is one of a family of routines that give the user direct access to the dynamic linking facilities (using the -ldl option on the compiler or ld command line). dlerror returns a null-terminated character string (with no trailing newline) that describes the last error that occurred during dynamic linking processing.
dlget(3C) dlget(3C) NAME dlget - retrieve information about a loaded module (program or shared library) SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include void *dlget(int index, struct load_module_desc *desc, size_t desc_size); A dA DESCRIPTION dlget is one of a family of routines that give the user direct access to the dynamic linking facilities. dlget returns information about a loaded module for a process.
dlget(3C) dlget(3C) HP-UX Linker and Libraries User’s Guide (See manuals (5) for ordering information) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−195 dA
dlgetmodinfo(3C) dlgetmodinfo(3C) NAME dlgetmodinfo - retrieve information about a loaded module (program or shared library) SYNOPSIS cc [flag ... ] file ... A dA -ldl [library ] ... #include
dlgetname(3C) dlgetname(3C) NAME dlgetname - retrieve the name of a load module given a load module descriptor SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include
dlmodadd(3C) dlmodadd(3C) NAME dlmodadd - register information about dynamically generated functions SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include void* dlmodadd(void* associate_handle, void *func_start, size_t func_size, void *linkage_ptr, void *unwind_info); DESCRIPTION A dA dlmodadd registers information about a dynamically generated function, which can be retrived through dlmodinfo. The dlmodremove interface can be used to remove the registered information.
dlmodadd(3C) dlmodadd(3C) Texts and Tutorials HP-UX Linker and Libraries Online User Guide (See the +help option) HP-UX Linker and Libraries User’s Guide (See manuals (5) for ordering information) A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−199 dA
dlmodinfo(3C) dlmodinfo(3C) NAME dlmodinfo - retrieve information about a loaded module (program or shared library) SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include
dlmodinfo(3C) dlmodinfo(3C) MULTITHREAD USAGE Thread safe in libdl.sl but not in libxpdl.sl. AUTHOR dlmodinfo was developed by HP. SEE ALSO System Tools: exec (2) ld(1) Miscellaneous: a.out (4) dlclose (3C) dlerror (3C) dlget (3C) dlgetname (3C) dlopen (3C) dlsym (3C) System loader. Invokes the link editor. Assembler, compiler, and linker output. Unloads a shared library previously loaded by dlopen(). Prints the last error message recorded by dld. Returns information about a loaded module.
dlmodremove(3C) dlmodremove(3C) NAME dlmodremove - remove information registered using dlmodadd SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include int dlmodremove(void* handle); DESCRIPTION dlmodremove removes the registered information of individual dynamically generated functions. handle must be a handle returned by dlmodadd().
dlopen(3C) dlopen(3C) NAME dlopen - open a shared library SYNOPSIS cc [flag ... ] cfile ... -ldl [library ] ... #include void *dlopen(const char *file, int mode); DESCRIPTION dlopen is one of a family of routines that give the user direct access to the dynamic linking facilities (using the -ldl option on the compiler or ld command line). dlopen makes a shared object specified by a file available to a running process.
dlopen(3C) dlopen(3C) further RTLD_NOW operations redundant and any further RTLD_LAZY operations irrelevant. Similarly note that once RTLD_GLOBAL has been specified, the object will maintain the RTLD_GLOBAL status regardless of any previous or future specification of RTLD_LOCAL, so long as the object remains in the address space (see dlclose (3C)).
dlopen(3C) dlopen(3C) RETURN VALUE If file cannot be found, cannot be opened for reading, is not a shared object, or if an error occurs during the process of loading file or relocating its symbolic references, dlopen returns NULL. More detailed diagnostic information is available through dlerror. WARNINGS The environment variable LD_LIBRARY_PATH and SHLIB_PATH should contain a colon-separated list of directories, in the same format as the PATH variable (see sh(1)).
dlsym(3C) dlsym(3C) NAME dlsym - get the address of a symbol in shared library SYNOPSIS cc [flag ... ] file ... -ldl [library ] ... #include void *dlsym(void *handle, const char *name); A dA DESCRIPTION dlsym is one of a family of routines that give the user direct access to the dynamic linking facilities (using the -ldl option on the compiler or ld command line). dlsym allows a process to obtain the address of a symbol defined within a shared object previously opened by dlopen.
dlsym(3C) dlsym(3C) /* invoke function, passing value of integer as a parameter */ i = (*fptr)(*iptr); The next example shows how one can use dlsym with RTLD_NEXT to add functionality to an existing interface. Again, error checking has been omitted.
doupdate(3X) doupdate(3X) (CURSES) NAME doupdate, refresh, wnoutrefresh, wrefresh — refresh windows and lines SYNOPSIS #include int doupdate(void); int refresh(void); int wnoutrefresh(WINDOW *win); int wrefresh(WINDOW *win); A dA DESCRIPTION The refresh() and wrefresh() functions refresh the current or specified window.
drand48(3C) drand48(3C) NAME drand48( ), erand48( ), lrand48( ), nrand48( ), mrand48( ), jrand48( ), srand48( ), seed48( ), lcong48( ) - generate uniformly distributed pseudo-random numbers SYNOPSIS #include
drand48(3C) drand48(3C) nrand48(), and jrand48() do not require an initialization entry point to be called first. All the routines work by generating a sequence of 48-bit integer values, X[i], according to the linear congruential formula X[n+1] = (a*X[n] + c) modulo m n>=0 The parameter m = 2ˆ48; hence 48-bit integer arithmetic is performed.
drand48(3C) drand48(3C) lrand48(): AES, SVID2, SVID3, XPG2, XPG3, XPG4 mrand48(): AES, SVID2, SVID3, XPG2, XPG3, XPG4 nrand48(): AES, SVID2, SVID3, XPG2, XPG3, XPG4 seed48(): AES, SVID2, SVID3, XPG2, XPG3, XPG4 srand48(): AES, SVID2, SVID3, XPG2, XPG3, XPG4 A HP-UX 11i Version 2: August 2003 −3− Hewlett-Packard Company Section 3−−211 dA
dupwin(3X) dupwin(3X) (ENHANCED CURSES) NAME dupwin — duplicate a window SYNOPSIS #include WINDOW *dupwin(WINDOW *win); DESCRIPTION The dupwin() function creates a duplicate of the window win. RETURN VALUE Upon successful completion, dupwin() returns a pointer to the new window. Otherwise, it returns a null pointer. A dA ERRORS No errors are defined. SEE ALSO derwin(3X), doupdate(3X), . CHANGE HISTORY First released in X/Open Curses, Issue 4.
echo(3X) echo(3X) (CURSES) NAME echo, noecho — enable/disable terminal echo SYNOPSIS #include int echo(void); int noecho(void); DESCRIPTION The echo() function enables Echo mode for the current screen. The noecho() function disables Echo mode for the current screen. Initially, curses software echo mode is enabled and hardware echo mode of the tty driver is disabled. RETURN VALUE Upon successful completion, these functions return OK. Otherwise, they return ERR. A ERRORS No errors are defined.
echochar(3X) echochar(3X) (ENHANCED CURSES) NAME echochar, wechochar — echo single-byte character and rendition to a window and refresh SYNOPSIS #include int echochar(const chtype ch); int wechochar(WINDOW *win, const chtype ch); DESCRIPTION The echochar() function is equivalent to a call to addch() followed by a call to refresh(). The wechochar() function is equivalent to a call to waddch() followed by a call to wrefresh(). RETURN VALUE Upon successful completion, these functions return OK.
echo_wchar(3X) echo_wchar(3X) (ENHANCED CURSES) NAME echo_wchar, wecho_wchar — write a complex character and immediately refresh the window SYNOPSIS #include int echo_wchar(const cchar_t *wch); int wecho_wchar(WINDOW *win, const cchar_t *wch); DESCRIPTION The echo_wchar() function is equivalent to calling add_wch() and then calling refresh(). The wecho_wchar() function is equivalent to calling wadd_wch() and then calling wrefresh().
ecvt(3C) ecvt(3C) NAME ecvt( ), fcvt( ), gcvt( ) - convert floating-point number to string SYNOPSIS #include
ecvt(3C) ecvt(3C) ecvt_r() and fcvt_r() are obsolescent interfaces supported only for compatibility with existing DCE applications. New multi-threaded applications should use ecvt() and fcvt(). AUTHOR ecvt() and fcvt() were developed by AT&T. gcvt() was developed by AT&T and HP. SEE ALSO setlocale(3C), printf(3S), lang(5), thread_safety(5).
elf(3E) elf(3E) NAME elf - object file access library SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include DESCRIPTION Functions in the ELF access library let a program manipulate ELF (Executable and Linking Format) object files, archive files, and archive members. The header file provides type and function declarations for all library services. A eA Programs communicate with many of the higher-level routines using an ELF descriptor.
elf(3E) elf(3E) Programs may translate data explicitly, taking full control over the object file layout and semantics. If the program prefers not to have and exercise complete control, the library provides a higher-level interface that hides many object file details. elf_begin and related functions let a program deal with the native memory types, converting between memory objects and their file equivalents automatically when reading or writing an object file.
elf(3E) elf(3E) ELF32_FSZ_TYPE These constants give the file sizes in bytes of the basic ELF types for the 32-bit class of files. See elf_fsize for more information. ELF64_FSZ_TYPE These constants give the file sizes in bytes of the basic ELF types for the 64-bit class of files. See elf_fsize for more information. A eA ELF_K_KIND The function elf_kind identifies the KIND of file associated with an ELF descriptor.
elf_begin(3E) elf_begin(3E) NAME elf_begin - make a file descriptor SYNOPSIS cc [flag]... file ... -lelf [library ]... #include Elf *elf_begin(int fildes, Elf_Cmd cmd, Elf *ref); DESCRIPTION elf_begin, elf_next, elf_rand, and elf_end work together to process ELF object files, either individually or as members of archives. After obtaining an ELF descriptor from elf_begin, the program may read an existing file, update an existing file, or create a new file.
elf_begin(3E) elf_begin(3E) All data associated with an ELF descriptor remain allocated until elf_end terminates the descriptor’s last activation. After the descriptors have been terminated, the storage is released; attempting to reference such data gives undefined behavior. Consequently, a program that deals with multiple input (or output) files must keep the ELF descriptors active until it finishes with them.
elf_begin(3E) elf_begin(3E) return; ehdr = elf32_newehdr(elf); phdr = elf32_newphdr(elf, count); scn = elf_newscn(elf); shdr = elf32_getshdr(scn); data = elf_newdata(scn); elf_update(elf, ELF_C_WRITE); elf_end(elf); Finally, the following outline shows how one might update an existing ELF file. Again, this example is simplified to show the overall flow. elf_version(EV_CURRENT); fildes = open("path/name", O_RDWR); elf = elf_begin(fildes, ELF_C_RDWR, (Elf *)0); /* add new or delete old information . . .
elf_cntl(3E) elf_cntl(3E) NAME elf_cntl - control a file descriptor SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include int elf_cntl(Elf *elf, Elf_Cmd cmd); DESCRIPTION elf_cntl instructs the library to modify its behavior with respect to an ELF descriptor, elf . As A eA elf_begin (3E) describes, an ELF descriptor can have multiple activations, and multiple ELF descriptors may share a single file descriptor. Generally, elf_cntl commands apply to all activations of elf .
elf_end(3E) elf_end(3E) NAME elf_end - finish using an object file SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include int elf_end(Elf *elf); DESCRIPTION A program uses elf_end to terminate an ELF descriptor, elf , and to deallocate data associated with the descriptor. Until the program terminates a descriptor, the data remain allocated. elf should be a value previously returned by elf_begin; a null pointer is allowed as an argument, to simplify error handling.
elf_error(3E) elf_error(3E) NAME elf_errmsg, elf_errno - error handling SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include const char *elf_errmsg(int err); int elf_errno(void); DESCRIPTION If an ELF library function fails, a program may call elf_errno to retrieve the library’s internal error number. As a side effect, this function resets the internal error number to zero, which indicates no error.
elf_fill(3E) elf_fill(3E) NAME elf_fill - set fill byte SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include void elf_fill(int fill); DESCRIPTION Alignment constraints for ELF files sometimes require the presence of ‘‘holes.’’ For example, if the data for one section are required to begin on an eight-byte boundary, but the preceding section is too ‘‘short,’’ the library must fill the intervening bytes. These bytes are set to the fill character.
elf_flag(3E) elf_flag(3E) NAME elf_flagdata, elf_flagehdr, elf_flagelf, elf_flagphdr, elf_flagscn, elf_flagshdr - manipulate flags SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include
elf_fsize(3E) elf_fsize(3E) NAME elf32_fsize, elf64_fsize - return the size of an object file type for elf32 files, return the size of an object file type for elf64 files, respectively. SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include
elf_getarhdr(3E) elf_getarhdr(3E) NAME elf_getarhdr - retrieve archive member header SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include Elf_Arhdr *elf_getarhdr(Elf *elf); DESCRIPTION elf_getarhdr returns a pointer to an archive member header, if one is available for the ELF descriptor elf . Otherwise, no archive member header exists, an error occurred, or elf was null; elf_getarhdr then returns a null value. The header includes the following members.
elf_getarsym(3E) elf_getarsym(3E) NAME elf_getarsym - retrieve archive symbol table SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include Elf_Arsym *elf_getarsym(Elf *elf, size_t *ptr); DESCRIPTION elf_getarsym returns a pointer to the archive symbol table, if one is available for the ELF descriptor elf. Otherwise, the archive doesn’t have a symbol table, an error occurred, or elf was null; elf_getarsym then returns a null value.
elf_getbase(3E) elf_getbase(3E) NAME elf_getbase - get the base offset for an object file SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include off_t elf_getbase(Elf *elf); DESCRIPTION elf_getbase returns the file offset of the first byte of the file or archive member associated with elf , if it is known or obtainable, and -1 otherwise. A null elf is allowed, to simplify error handling; the return value in this case is -1.
elf_getdata(3E) elf_getdata(3E) NAME elf_getdata, elf_newdata, elf_rawdata - get section data SYNOPSIS cc [flag... ] file ... #include Elf_Data Elf_Data Elf_Data -lelf [library ] ... *elf_getdata(Elf_Scn *scn, Elf_Data *data); *elf_newdata(Elf_Scn *scn); *elf_rawdata(Elf_Scn *scn, Elf_Data *data); DESCRIPTION These functions access and manipulate the data associated with a section descriptor, scn . When reading an existing file, a section will have a single data buffer associated with it.
elf_getdata(3E) elf_getdata(3E) d_align This member holds the buffer’s required alignment, from the beginning of the section. That is, d_off will be a multiple of this member’s value. For example, if this member’s value is four, the beginning of the buffer will be four-byte aligned within the section. Moreover, the entire section will be aligned to the maximum of its constituents, thus ensuring appropriate alignment for a buffer within the section and within the file.
elf_getdata(3E) elf_getdata(3E) ehdr = elf32_getehdr(elf); scn = elf_getscn(elf, (size_t)ehdr->e_shstrndx); shdr = elf32_getshdr(scn); if (shdr->sh_type != SHT_STRTAB) { /* not a string table */ } data = 0; if ((data = elf_getdata(scn, data)) == 0 || data->d_size == 0) { /* error or no data */ } The e_shstrndx member in an ELF header holds the section table index of the string table. The program gets a section descriptor for that section, verifies it is a string table, and then retrieves the data.
elf_getehdr(3E) elf_getehdr(3E) NAME elf32_getehdr, elf32_newehdr, elf64_getehdr, elf64_newehdr - retrieve class-dependent object file header for elf32 and elf64 files, respectively SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include
elf_getehdr(3E) elf_getehdr(3E) SEE ALSO elf(3E), elf_begin(3E), elf_flag(3E), elf_getident(3E).
elf_getident(3E) elf_getident(3E) NAME elf_getident - retrieve file identification data SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include char *elf_getident(Elf *elf, size_t *ptr); DESCRIPTION As elf (3E) explains, ELF provides a framework for various classes of files, where basic objects may have 32 bits, 64 bits, and so forth.
elf_getphdr(3E) elf_getphdr(3E) NAME elf32_getphdr, elf32_newphdr, elf64_getphdr, elf64_newphdr - retrieve class-dependent program header table for elf32 and elf64 files, respectively SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include
elf_getphdr(3E) elf_getphdr(3E) SEE ALSO elf(3E), elf_begin(3E), elf_flag(3E), elf_getehdr(3E).
elf_getscn(3E) elf_getscn(3E) NAME elf_getscn, elf_ndxscn, elf_newscn, elf_nextscn - get section information SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include Elf_Scn *elf_getscn(Elf *elf, size_t index); size_t elf_ndxscn(Elf_Scn *scn); Elf_Scn *elf_newscn(Elf *elf); Elf_Scn *elf_nextscn(Elf *elf, Elf_Scn *scn); DESCRIPTION These functions provide indexed and sequential access to the sections associated with the ELF descriptor elf .
elf_getshdr(3E) elf_getshdr(3E) NAME elf32_getshdr, elf64_getshdr - retrieve class-dependent section header for elf32 and elf64 files, respectively SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include Elf32_Shdr *elf32_getshdr(Elf_Scn *scn); Elf64_Shdr *elf64_getshdr(Elf_Scn *scn); DESCRIPTION For a 32-bit class file, elf32_getshdr returns a pointer to a section header for the section descriptor scn .
elf_hash(3E) elf_hash(3E) NAME elf_hash - compute hash value SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include unsigned long elf_hash(const char *name); DESCRIPTION elf_hash computes a hash value, given a null terminated string, name. The returned hash value, h, can be used as a bucket index, typically after computing h mod x to ensure appropriate bounds.
elf_kind(3E) elf_kind(3E) NAME elf_kind - determine file type SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include Elf_Kind elf_kind(Elf *elf); DESCRIPTION This function returns a value identifying the kind of file associated with an ELF descriptor elf . Currently defined values appear below. A eA ELF_K_AR The file is an archive (see ar (4)). An ELF descriptor may also be associated with an archive member, not the archive itself, and then elf_kind identifies the member’s type.
elf_next(3E) elf_next(3E) NAME elf_next - sequential archive member access SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include Elf_Cmd elf_next(Elf *elf); DESCRIPTION elf_next, elf_rand, and elf_begin manipulate simple object files and archives. elf is an ELF descriptor previously returned from elf_begin. elf_next provides sequential access to the next archive member.
elf_rand(3E) elf_rand(3E) NAME elf_rand - random archive member access SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include size_t elf_rand(Elf *elf, size_t offset); DESCRIPTION elf_rand, elf_next, and elf_begin manipulate simple object files and archives. elf is an ELF descriptor previously returned from elf_begin. A eA elf_rand provides random archive processing, preparing elf to access an arbitrary archive member.
elf_rawfile(3E) elf_rawfile(3E) NAME elf_rawfile - retrieve uninterpreted file contents SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include char *elf_rawfile(Elf *elf, size_t *ptr); DESCRIPTION elf_rawfile returns a pointer to an uninterpreted byte image of the file. This function should be used only to retrieve a file being read. For example, a program might use elf_rawfile to retrieve the bytes for an archive member.
elf_strptr(3E) elf_strptr(3E) NAME elf_strptr - make a string pointer SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include char *elf_strptr(Elf *elf, size_t section, size_t offset); DESCRIPTION This function converts a string section offset to a string pointer. elf identifies the file in which the string section resides, and section gives the section table index for the strings.
elf_update(3E) elf_update(3E) NAME elf_update - update an ELF descriptor SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include off_t elf_update(Elf *elf, Elf_Cmd cmd); DESCRIPTION elf_update causes the library to examine the information associated with an ELF descriptor, elf , and to recalculate the structural data needed to generate the file’s image. cmd may have the following values.
elf_update(3E) elf_update(3E) p_memsz p_flags p_align Member sh_name sh_type sh_flags sh_addr sh_offset Section Header sh_size sh_link sh_info sh_addralign A eA Notes Only when ELF_F_LAYOUT asserted Only when ELF_F_LAYOUT asserted Only when ELF_F_LAYOUT asserted sh_entsize Member Data Descriptor d_buf d_type d_size d_off Notes Only when ELF_F_LAYOUT asserted d_align d_version Note the program is responsible for two particularly important members (among others) in the ELF header.
elf_version(3E) elf_version(3E) NAME elf_version - coordinate ELF library and application versions SYNOPSIS cc [flag... ] file ... -lelf [library ]... #include unsigned elf_version(unsigned ver); DESCRIPTION As elf (3E) explains, the program, the library, and an object file have independent notions of the ‘‘latest’’ ELF version. elf_version lets a program determine the ELF library’s internal version.
elf_xlate(3E) elf_xlate(3E) NAME elf32_xlatetof, elf32_xlatetom, elf64_xlatetof, elf64_xlatetom - class-dependent data translation for elf32 and elf64 files, respectively SYNOPSIS cc [flag... ] file ... -lelf [library ] ... #include
elf_xlate(3E) elf_xlate(3E) For elf32 files: Elf_Type 32-Bit Memory Type ELF_T_ADDR ELF_T_BYTE ELF_T_DYN ELF_T_EHDR ELF_T_HALF ELT_T_OFF ELF_T_PHDR ELF_T_REL ELF_T_RELA ELF_T_SHDR ELF_T_SWORD ELF_T_SYM ELF_T_WORD Elf32_Addr unsigned char Elf32_Dyn Elf32_Ehdr Elf32_Half Elf32_Off Elf32_Phdr Elf32_Rel Elf32_Rela Elf32_Shdr Elf32_Sword Elf32_Sym Elf32_Word For elf64 files: A Elf_Type 64-Bit Memory Type ELF_T_ADDR ELF_T_BYTE ELF_T_DYN ELF_T_EHDR ELF_T_HALF ELT_T_OFF ELF_T_PHDR ELF_T_REL ELF_T_RELA ELF
end(3C) end(3C) NAME end, etext, edata, __data_start, __text_start - last locations in program SYNOPSIS extern void *_end, *end, *_etext, *etext, *_edata, *edata, *__data_start, *__text_start; DESCRIPTION These names refer neither to routines nor to locations with interesting contents.
endwin(3X) endwin(3X) (CURSES) NAME endwin — suspend Curses session SYNOPSIS #include int endwin(void); DESCRIPTION The endwin() function restores the terminal after Curses activity by at least restoring the saved shell terminal mode, flushing any output to the terminal and moving the cursor to the first column of the last line of the screen. Refreshing a window resumes program mode. The application must call endwin() for each terminal being used before exiting.
erasechar(3X) erasechar(3X) (CURSES) NAME erasechar, killchar — single-byte terminal environment query functions SYNOPSIS #include char erasechar(void); char killchar(void); DESCRIPTION The erasechar() function returns the current erase character. The erasewchar() function stores the current erase character in the object pointed to by ch. If no erase character has been defined, the function will fail and the object pointed to by ch will not be changed.
erasewchar(3X) erasewchar(3X) (ENHANCED CURSES) NAME erasewchar, killwchar — terminal environment query functions SYNOPSIS #include int erasewchar(wchar_t *ch); int killwchar(wchar_t *ch); DESCRIPTION The erasewchar() function stores the current erase character in the object pointed to by ch. If no erase character has been defined, the function will fail and the object pointed to by ch will not be changed.
erf(3M) erf(3M) NAME erf( ), erff( ), erfl( ), erfw( ), erfq( ), erfc( ), erfcf( ), erfcl( ), erfcw( ), erfcq( ) - error function and complementary error functions SYNOPSIS #include
erf(3M) erf(3M) Whether erf() and erfc() raise the inexact exception is unspecified. If x is NaN, erf() and erfc() return NaN. ERRORS No errors are defined. SEE ALSO exp(3M), pow(3M), sqrt(3M), math(5). STANDARDS CONFORMANCE erf(), erfc() : SVID3, XPG4.
exp(3M) exp(3M) NAME exp( ), expf( ), expl( ), expw( ), expq( ) - exponential functions SYNOPSIS #include double exp(double x); float expf(float x); Itanium(R)-based System Only long double expl(long double x); extended expw(extended x); quad expq(quad x); A eA DESCRIPTION exp() returns ex. expf() is a float version of exp(); it takes a float argument and returns a float result.
exp(3M) exp(3M) Itanium-based System Only HP-UX libm functions on Itanium-based systems do not set errno by default. For errno setting, compile with the +Olibmerrno option. SEE ALSO cbrt(3M), cexp(3M), exp10(3M), exp2(3M), expm1(3M), log(3M), pow(3M), sqrt(3M), math(5). STANDARDS CONFORMANCE exp() : SVID3, XPG4.
exp10(3M) exp10(3M) NAME exp10( ), exp10f( ), exp10l( ), exp10w( ), exp10q( ) - base-10 exponential functions SYNOPSIS #include Itanium(R)-based System Only double exp10(double x); float exp10f(float x); long double exp10l(long double x); extended exp10w(extended x); quad exp10q(quad x); A eA DESCRIPTION Itanium-based System Only exp10() returns 10x. exp10f() is a float version of exp10(); it takes a float argument and returns a float result.
exp2(3M) exp2(3M) NAME exp2( ), exp2f( ), exp2l( ), exp2w( ), exp2q( ) - base-2 exponential functions SYNOPSIS #include double exp2(double x); Itanium(R)-based System Only float exp2f(float x); long double exp2l(long double x); extended exp2w(extended x); quad exp2q(quad x); DESCRIPTION exp2() returns 2x. Itanium-based Sysstem Only exp2f() is a float version of exp2(); it takes a float argument and returns a float result.
exp2(3M) exp2(3M) STANDARDS CONFORMANCE exp2(), exp2f(), exp2l() : ISO/IEC C99 (including Annex F, ‘‘IEC 60559 floating-point arithmetic’’) A eA Section 3−−264 Hewlett-Packard Company −2− HP-UX 11i Version 2: August 2003
expm1(3M) expm1(3M) NAME expm1( ), expm1f( ), expm1l( ), expm1w( ), expm1q( ) - exponential minus 1 functions SYNOPSIS #include double expm1(double x); Itanium(R)-based System Only float expm1f(float x); long double expm1l(long double x); extended expm1w(extended x); quad expm1q(quad x); DESCRIPTION The expm1() function is equivalent to exp(x ) - 1, but may be more accurate for very small values of x.
expm1(3M) expm1(3M) SEE ALSO annuity(3M), compound(3M), exp(3M), log1p(3M), math(5). STANDARDS CONFORMANCE expm1() : XPG4.
fabs(3M) fabs(3M) NAME fabs( ), fabsf( ), fabsl( ), fabsw( ), fabsq( ) - absolute value functions SYNOPSIS #include double fabs(double x); float fabsf(float x); Itanium(R)-based System Only long double fabsl(long double x); extended fabsw(extended x); quad fabsq(quad x); DESCRIPTION The fabs() function returns the absolute value of x, |x|. fabsf() is a float version of fabs(); it takes a float argument and returns a float result.
fattach(3C) fattach(3C) NAME fattach( ) - attach a STREAMS file descriptor to an object in the file system name space SYNOPSIS #include int fattach(int fd, const char *path); DESCRIPTION The fattach() function attaches the fd file descriptor to an object in the file system name space designated by path . fd specifies an open file descriptor to a STREAMS device or STREAMS-based pipe. path specifies the pathname of an existing object in the file system.
fclose(3S) fclose(3S) NAME fclose(), fflush(), fclose_unlocked(), fflush_unlocked() - close or flush a stream SYNOPSIS #include int fclose(FILE *stream); int fflush(FILE *stream); Obsolescent Interfaces int fclose_unlocked(FILE *stream); int fflush_unlocked(FILE *stream); DESCRIPTION fclose() causes any buffered data for the named stream to be written out, and the stream to be closed. Buffers allocated by the standard input/output system may be freed.
fclose(3S) fclose(3S) STANDARDS CONFORMANCE fclose(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.1, ANSI C fflush(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.
fdetach(3C) fdetach(3C) NAME fdetach( ) - detach a name from a STREAMS file descriptor SYNOPSIS #include int fdetach(const char *path); DESCRIPTION The fdetach() function detaches a file descriptor from a name in the file system designated by path . path specifies the pathname of an existing object in the file system name space that was previously attached (see the fattach() reference page).
fdim(3M) fdim(3M) NAME fdim( ), fdimf( ), fdiml( ), fdimw( ), fdimq( ) - positive difference functions SYNOPSIS #include double fdim(double x, double y); Itanium(R)-based System Only float fdimf(float x, float y); long double fdiml(long double x, long double y); extended fdimw(extended x, extended y); quad fdimq(quad x, quad y); DESCRIPTION The fdim() function determines the positive difference between its arguments.
feclearexcept(3M) feclearexcept(3M) NAME feclearexcept( ) - clear floating-point exception flags SYNOPSIS #include Itanium(R)-based System Only int feclearexcept(int excepts); PA-RISC Only void feclearexcept(int excepts); DESCRIPTION The feclearexcept() function clears the exception flags represented by its argument. The argument can be constructed as a bitwise OR of the exception macros: FE_INEXACT, FE_DIVBYZERO, FE_UNDERFLOW, FE_OVERFLOW, and FE_INVALID.
feclearexcept(3M) feclearexcept(3M) STANDARDS CONFORMANCE feclearexcept() : ISO/IEC C99 (including Annex F, "IEC 60559 floating-point arithmetic") A fA Section 3−−274 Hewlett-Packard Company −2− HP-UX 11i Version 2: August 2003
fegetenv(3M) fegetenv(3M) NAME fegetenv( ) - get floating-point environment SYNOPSIS #include Itanium(R)-based System Only int fegetenv(fenv_t *envp); PA-RISC Only void fegetenv(fenv_t *envp); DESCRIPTION The fegetenv() function stores the current floating-point environment in the object pointed to by the argument envp . To use this function, compile either with the default -Ae option or with the -Aa and -D_HPUX_SOURCE options. Make sure your program includes .
fegetexceptflag(3M) fegetexceptflag(3M) NAME fegetexceptflag( ) - get floating-point exception flags SYNOPSIS #include Itanium(R)-based System Only int fegetexceptflag(fexcept_t *flagp, int excepts); PA-RISC Only void fegetexceptflag(fexcept_t *flagp, int excepts); A fA DESCRIPTION The fegetexceptflag() function stores a representation of the states of the floating-point exception flags indicated by the argument excepts in the object pointed to by the argument flagp .
fegetexceptflag(3M) fegetexceptflag(3M) STANDARDS CONFORMANCE fegetexceptflag() : ISO/IEC C99 (including Annex F, "IEC 60559 floating-point arithmetic") A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−277 fA
fegetflushtozero(3M) fegetflushtozero(3M) NAME fegetflushtozero( ) - get floating-point underflow mode SYNOPSIS #include int fegetflushtozero(void); DESCRIPTION The fegetflushtozero() function retrieves the value representing the current underflow mode, which is either IEEE-754-compliant (gradual) underflow mode or flush-to-zero mode. The default underflow mode is IEEE-754-compliant. A fA Flush-to-zero mode, also known as fast underflow mode, is supported on most PA1.1 systems and on all PA2.
fegetflushtozero(3M) fegetflushtozero(3M) AUTHOR fegetflushtozero() was developed by HP and is not required by any current standard. SEE ALSO fesetflushtozero(3M), fenv(5).
fegetround(3M) fegetround(3M) NAME fegetround( ) - get floating-point rounding direction mode SYNOPSIS #include int fegetround(void); DESCRIPTION The fegetround() function gets the current rounding direction, as specified by the IEEE 754 (IEC 60559) floating-point standard. The default rounding direction mode is round to nearest (FE_TONEAREST). USAGE To use this function, compile either with the default -Ae option or with the -Aa and -D_HPUX_SOURCE options. Make sure your program includes
fegetround(3M) fegetround(3M) SEE ALSO fesetround(3M), fenv(5).
fegettrapenable(3M) fegettrapenable(3M) NAME fegettrapenable( ) - get floating-point exception trap enables SYNOPSIS #include int fegettrapenable(void); DESCRIPTION The fegettrapenable() function determines which floating-point exception traps are currently enabled. USAGE To use this function, compile either with the default -Ae option or with the -Aa and -D_HPUX_SOURCE options. Make sure your program includes .
feholdexcept(3M) feholdexcept(3M) NAME feholdexcept( ) - save floating-point environment SYNOPSIS #include int feholdexcept(fenv_t *envp); DESCRIPTION The feholdexcept() function saves the current floating-point environment in the object pointed to by the argument envp . This function also clears the floating-point exception flags and disables all traps. Use feholdexcept() with feupdateenv() to hide spurious floating-point exceptions. Use it with fesetenv() to hide all floating-point exceptions.
feraiseexcept(3M) feraiseexcept(3M) NAME feraiseexcept( ) - raise floating-point exceptions SYNOPSIS #include Itanium(R)-based System Only int feraiseexcept(int excepts); PA-RISC Only void feraiseexcept(int excepts); DESCRIPTION The feraiseexcept() function raises the floating-point exceptions represented by its argument. The argument can be constructed as a bitwise OR of the exception macros: FE_INEXACT, FE_DIVBYZERO, FE_UNDERFLOW, FE_OVERFLOW, and FE_INVALID.
feraiseexcept(3M) feraiseexcept(3M) STANDARDS CONFORMANCE feraiseexcept() : ISO/IEC C99 (including Annex F, "IEC 60559 floating-point arithmetic") A HP-UX 11i Version 2: August 2003 −2− Hewlett-Packard Company Section 3−−285 fA
ferror(3S) ferror(3S) NAME ferror(), feof(), clearerr(), ferror_unlocked(), feof_unlocked(), clearerr_unlocked() - stream status inquiries SYNOPSIS #include
ferror(3S) ferror(3S) feof(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.
fesetenv(3M) fesetenv(3M) NAME fesetenv( ) - set floating-point environment SYNOPSIS #include Itanium(R)-based System Only int fesetenv(const fenv_t *envp); PA-RISC Only void fesetenv(const fenv_t *envp); DESCRIPTION The fesetenv() function establishes the floating-point environment represented by the object pointed to by envp . The argument envp must point to an object set by a call to fegetenv() or feholdexcept(), or equal the macro FE_DFL_ENV.
fesetenv(3M) fesetenv(3M) SEE ALSO fegetenv(3M), feholdexcept(3M), feupdateenv(3M), fenv(5).
fesetexceptflag(3M) fesetexceptflag(3M) NAME fesetexceptflag( ) - set floating-point exception flags SYNOPSIS #include Itanium(R)-based System Only int fesetexceptflag(const fexcept_t *flagp, int excepts); PA-RISC Only void fesetexceptflag(const fexcept_t *flagp, int excepts); A fA DESCRIPTION The fesetexceptflag() function sets the status for the floating-point exception flags indicated by the argument excepts to the states stored in the object pointed to by flagp .
fesetexceptflag(3M) fesetexceptflag(3M) SEE ALSO feclearexcept(3M), fegetexceptflag(3M), fegettrapenable(3M), feraiseexcept(3M), fesettrapenable(3M), fetestexcept(3M), fenv(5).
fesetflushtozero(3M) fesetflushtozero(3M) NAME fesetflushtozero( ) - set floating-point underflow mode SYNOPSIS #include void fesetflushtozero(int); DESCRIPTION The fesetflushtozero() function sets the current underflow mode. If the argument is 1, the underflow mode is set to flush-to-zero mode. If the argument is zero, the underflow mode is set to IEEE754-compliant (gradual) underflow mode. For arguments other than 1 or zero, the effect is undefined.
fesetflushtozero(3M) fesetflushtozero(3M) AUTHOR fesetflushtozero() was developed by HP and is not required by any current standard. SEE ALSO fegetflushtozero(3M), fenv(5).
fesetround(3M) fesetround(3M) NAME fesetround( ) - set floating-point rounding direction mode SYNOPSIS #include int fesetround(int round); DESCRIPTION The fesetround() function establishes the rounding direction represented by its argument round . The round argument must equal one of the macros: FE_TONEAREST, FE_UPWARD, FE_DOWNWARD, and FE_TOWARDZERO. If the argument does not match a rounding direction macro, the rounding direction is not changed.
fesettrapenable(3M) fesettrapenable(3M) NAME fesettrapenable( ) - set exception trap enables SYNOPSIS #include void fesettrapenable(int excepts); DESCRIPTION The fesettrapenable() function enables the exception traps indicated by the argument excepts and disables the exception traps not indicated by the argument. The argument can be constructed as a bitwise OR of the exception macros: FE_INEXACT, FE_DIVBYZERO, FE_UNDERFLOW, FE_OVERFLOW, and FE_INVALID.
fetestexcept(3M) fetestexcept(3M) NAME fetestexcept( ) - test floating-point exceptions SYNOPSIS #include int fetestexcept(int excepts); DESCRIPTION The fetestexcept() function determines which of a specified subset of the floating-point exception flags are currently set. The excepts argument specifies the floating-point exception flags to be queried. The argument can be constructed as a bitwise OR of the exception macros: FE_INEXACT, FE_DIVBYZERO, FE_UNDERFLOW, FE_OVERFLOW, and FE_INVALID.
feupdateenv(3M) feupdateenv(3M) NAME feupdateenv( ) - update floating-point environment SYNOPSIS #include Itanium(R)-based System Only int feupdateenv(const fenv_t *envp); PA-RISC Only void feupdateenv(const fenv_t *envp); DESCRIPTION The feupdateenv() function saves the currently raised floating-point exceptions in its automatic storage, installs the floating-point environment represented by the object pointed to by envp , and then raises the saved floating-point exceptions.
feupdateenv(3M) feupdateenv(3M) SEE ALSO fegetenv(3M), feholdexcept(3M), fesetenv(3M), fenv(5).
fgetpos(3S) fgetpos(3S) NAME fgetpos( ), fsetpos( ) - save and restore a file position indicator for a stream SYNOPSIS #include int fgetpos(FILE *stream, fpos_t *pos); int fsetpos(FILE *stream, const fpos_t *pos); DESCRIPTION fgetpos() Store the current value of the file position indicator for the stream pointed to by stream in the object pointed to by pos .
fgetpos64(3S) fgetpos64(3S) NAME fgetpos64( ), fopen64( ), freopen64( ), fseeko64( ), fsetpos64( ), fstatvfsdev64( ), ftello64( ), ftw64( ), nftw64( ), statvfsdev64( ), tmpfile64( ) - non-POSIX standard API interfaces to support large files. SYNOPSIS #include int fgetpos64(FILE *stream, fpos64_t *pos); #include FILE *fopen64(const char *pathname, const char *type); #include FILE *freopen64(const char *pathname, const char *type, FILE *stream); #include
fgetpos64(3S) fgetpos64(3S) returns, and errors are identical to freopen(). fseeko64() The fseeko64() function is identical to fseeko() except that fseeko64() accepts an off64_t for the size parameter instead of off_t. All other functional behaviors, returns, and errors are identical. fsetpos64() The fsetpos64() function is identical to fsetpos() except that fsetpos64() accepts an fpos64_t for the pos parameter instead of fpos_t. All other functional behaviors, returns, and errors are identical.
fgetws(3C) fgetws(3C) NAME fgetws(), fgetws_unlocked() - get a wide character string from a stream file SYNOPSIS #include #include wchar_t *fgetws(wchar_t *ws, int n, FILE *stream); Obsolescent Interface wchar_t *fgetws_unlocked(wchar_t *ws, int n, FILE *stream); Remarks fgetws() is compliant with the XPG4 Worldwide Portability Interface wide-character I/O functions. It parallels the 8-bit character I/O function defined in gets (3S).
fgetws(3C) fgetws(3C) WARNINGS fgetws_unlocked() is an obsolescent interface supported only for compatibility with existing DCE applications. New multithreaded applications should use fgetws(). AUTHOR fgetws() was developed by OSF and HP. SEE ALSO ferror(3S), flockfile(3S), thread_safety(5).
fileno(3S) fileno(3S) NAME fileno( ) - map stream pointer to file descriptor SYNOPSIS #include int fileno(FILE *stream); Obsolescent Interfaces int fileno_unlocked(FILE *stream); DESCRIPTION fileno() returns the integer file descriptor associated with the named stream ; see open (2). The following symbolic values in
filter(3X) filter(3X) (ENHANCED CURSES) NAME filter — disable use of certain terminal capabilities SYNOPSIS #include void filter(void); DESCRIPTION The filter() function changes the algorithm for initialising terminal capabilities that assume that the terminal has more than one line. A subsequent call to initscr() or newterm() performs the following additional actions: • Disable use of clear, cud, cud1, cup, cuu1 and vpa.
flash(3X) flash(3X) (CURSES) NAME flash — flash the screen SYNOPSIS #include int flash(void); DESCRIPTION The flash() function alerts the user. It flashes the screen, or if that is not possible, it sounds the audible alarm on the terminal. If neither signal is possible, nothing happens. RETURN VALUE The flash() function always returns OK. ERRORS No errors are defined. A fA APPLICATION USAGE Nearly all terminals have an audible alarm, but only some can flash the screen.
flockfile(3S) flockfile(3S) NAME flockfile( ), ftrylockfile( ), funlockfile( ) - explicit locking of streams within a multithread application SYNOPSIS #include void flockfile(FILE *stream); int ftrylockfile(FILE *stream); void funlockfile(FILE *stream); DESCRIPTION The flockfile(), ftrylockfile(), and funlockfile() functions provide for explicit application-level locking of streams.
floor(3M) floor(3M) NAME floor( ), floorf( ), floorl( ), floorw( ), floorq( ) - floor functions SYNOPSIS #include double floor(double x); Itanium(R)-based System Only float floorf(float x); long double floorl(long double x); extended floorw(extended x); quad floorq(quad x); DESCRIPTION The floor() returns the largest integer (represented as a double-precision number) not greater than x.
flushinp(3X) flushinp(3X) (CURSES) NAME flushinp — discard input SYNOPSIS #include int flushinp(void); DESCRIPTION The flushinp() function discards (flushes) any characters in the input buffer associated with the current screen. RETURN VALUE The flushinp() function always returns OK. ERRORS No errors are defined. SEE ALSO . A CHANGE HISTORY First released in X/Open Curses, Issue 2. X/Open Curses, Issue 4 The entry is rewritten for clarity.
fma(3M) fma(3M) (Itanium(R)-based System Only) NAME fma( ), fmaf( ), fmaw( ), fmal( ), fmaq( ) - floating multiply-add functions SYNOPSIS #include
fmax(3M) fmax(3M) NAME fmax( ), fmaxf( ), fmaxl( ), fmaxw( ), fmaxq( ) - maximum value functions SYNOPSIS #include double fmax(double x, double y); Itanium(R)-based System Only float fmaxf(float x, float y); long double fmaxl(long double x, long double y); extended fmaxw(extended x, extended y); quad fmaxq(quad x, quad y); DESCRIPTION The fmax() function determines the maximum numeric value of its arguments.
fmin(3M) fmin(3M) NAME fmin( ), fminf( ), fminl( ), fminw( ), fminq( ) - minimum value functions SYNOPSIS #include double fmin(double x, double y); Itanium(R)-based System Only float fminf(float x, float y); long double fminl(long double x, long double y); extended fminw(extended x, extended y); quad fminq(quad x, quad y); DESCRIPTION The fmin() function determines the minimum numeric value of its arguments.
fmod(3M) fmod(3M) NAME fmod( ), fmodf( ), fmodl( ), fmodw( ), fmodq( ) - remainder functions SYNOPSIS #include
fmtmsg(3C) fmtmsg(3C) NAME fmtmsg() - displays formatted message on standard error and console SYNOPSIS #include int fmtmsg( long class, const char *label, int severity, const char *text, const char *action, const char *tag ); A fA DESCRIPTION The fmtmsg() routine is intended as a language-independent error message service. Messages are displayed on the system console, standard error, or both, depending on the setting of the class parameter.
fmtmsg(3C) fmtmsg(3C) The tag component is intended to direct the user to the appropriate documentation to correct or avoid the error. It may be disabled by setting tag to MM_NULLTXT or RMM_NULL. EXTERNAL INFLUENCES The user may control the appearance of the message produced on standard error through the use of two environment variables: MSGVERB and SEV_LEVEL. These have no effect on the console message. The MSGVERB environment variable describes the components the user is interested in seeing.
fnmatch(3C) fnmatch(3C) NAME fnmatch( ) - match filename patterns SYNOPSIS #include int fnmatch(const char *pattern, const char *string, int flags); DESCRIPTION fnmatch() performs pattern matching as described in regexp (5) under PATTERN MATCHING NOTATION. By default, the rule qualifications for filename expansion do not apply; i.e., periods (dots) and slashes are matched as ordinary characters. This default behavior can be modified by using the flags described below.
fopen(3S) fopen(3S) NAME fopen( ), freopen( ), fdopen( ) - open or re-open a stream file; convert file to stream SYNOPSIS #include FILE *fopen(const char *pathname, const char *type); FILE *freopen(const char *pathname, const char *type, FILE *stream); FILE *fdopen(int fildes, const char *type); DESCRIPTION fopen() Opens the file named by pathname and associates a stream with it. pointer to the FILE structure associated with the stream .
fopen(3S) fopen(3S) ERRORS fopen(), fdopen(), and freopen() fail if: [EINVAL] The type argument is not a valid mode. [ENOMEM] There is insufficient space to allocate a buffer. fopen() and freopen() fail if: A fA [EACCES] Search permission is denied on a component of the path prefix, or the file exists and the permissions specified by type are denied, or the file does not exist and write permission is denied for the parent directory of the file to be created.
fpclassify(3M) fpclassify(3M) NAME fpclassify( ) - floating-point value classification macro SYNOPSIS #include int fpclassify(floating-type x); DESCRIPTION The fpclassify() macro classifies its argument value as NaN, infinite, normalized, denormalized, or zero. The argument must be of floating type, and classification is based on the type of the argument. For Itanium(R)-based systems, the argument can be any floating type. For PA-RISC, the argument must be either double or float.
fread(3S) fread(3S) NAME fread(), fwrite(), fread_unlocked(), fwrite_unlocked() - buffered binary input/output to a stream file SYNOPSIS #include
frexp(3M) frexp(3M) NAME frexp( ), frexpf( ), frexpl( ), frexpw( ), frexpq( ) - extract mantissa and exponent from floating-point number SYNOPSIS #include
fseek(3S) fseek(3S) NAME fseek(), fseeko(), ftell(), ftello(), rewind(), fseek_unlocked(), ftell_unlocked(), rewind_unlocked() - reposition a file pointer in a stream SYNOPSIS #include
fseek(3S) fseek(3S) flushed, or if any of the following conditions are encountered: [EAGAIN] The O_NONBLOCK flag is set for the file descriptor and the process would be delayed in the write operation. [EBADF] The stream is NULL. [EBADF] The underlying file is not open for writing. [EFBIG] An attempt was made to write a file that exceeds the process’s file size limit or the maximum file size. See ulimit (2).
ftok(3C) ftok(3C) NAME ftok( ) - create interprocess communication identifier SYNOPSIS #include key_t ftok(const char *path, int id); DESCRIPTION All interprocess communication facilities require the user to supply a key to be used by the msgget(), semget(), and shmget() system calls to obtain interprocess communication identifiers (see msgget (2), semget (2), and shmget (2)).
ftw(3C) ftw(3C) NAME ftw(), nftw() - walk a file tree executing a function SYNOPSIS #include
ftw(3C) ftw(3C) performance, depth should be at least as large as the number of levels in the tree. nftw() is similar to ftw() except that it takes the additional argument flags, and does not report or enter a directory which has already been visited during the walk. The flags field is the inclusive OR of the following values, as defined in the header file: FTW_PHYS If set, nftw() does a physical walk. It will not follow symbolic links, but will follow hard links.
ftw(3C) ftw(3C) argument is a pointer to a structure FTW (ie: *FTW). FTW contains the following members: int base; int level; The value of base is the offset from the first character in the path name to where the base name of the object starts; this path name is passed as the first argument to fn. The value of level indicates depth relative to the start of the walk, where the start level has a value of zero. APPLICATION USAGE ftw() can execute concurrently in separate threads.
ftw(3C) ftw(3C) Obsolescent Interfaces nftw2() is to be obsoleted at a future date. AUTHOR ftw(), nftw(), and nftw2() were developed by AT&T and HP. SEE ALSO stat(2), fgetpos64(3S), malloc(3C), thread_safety(5).
fwide(3C) fwide(3C) NAME fwide( ) - set stream orientation SYNOPSIS #include #include int fwide(FILE *stream, int mode); DESCRIPTION The fwide() function determines the orientation of the stream pointed to by stream . If mode is greater than zero, the function first attempts to make the stream wide-oriented. If mode is less than zero, the function first attempts to make the stream byte-oriented. Otherwise, mode is zero and the function does not alter the orientation of the stream.
fwprintf(3C) fwprintf(3C) NAME fwprintf( ), wprintf( ), swprintf( ) - print formatted wide-character output SYNOPSIS #include #include int fwprintf(FILE *stream, const wchar_t *format, ... ); int wprintf(const wchar_t *format, ... ); int swprintf(wchar_t *s, size_t n, const wchar_t *format, ... ); DESCRIPTION The fwprintf function places output on the named output stream . The wprintf() function places output on the standard output stream stdout .
fwprintf(3C) fwprintf(3C) appear in that order before the argument, if any, to be converted. A negative field width is taken as a flag followed by a positive field width. A negative precision is taken as if the precision were omitted.
fwprintf(3C) fwprintf(3C) expanded with leading zeros. The default precision is 1. The result of converting 0 with an explicit precision of 0 is no wide-characters. A X Behaves the same as the x conversion wide-character except that letters ABCDEF are used instead of abcdef. f The double argument is converted to decimal notation in the style [-]ddd.ddd , where the number of digits after the radix character is equal to the precision specification.
fwprintf(3C) fwprintf(3C) RETURN VALUE Upon successful completion, these functions return the number of wide-characters transmitted excluding the terminating null wide-character in the case of swprintf() or a negative value if an output error was encountered. ERRORS For the conditions under which fwprintf() and wprintf() will fail and may fail, refer to fputwc(); see putwc (3C).
fwscanf(3C) fwscanf(3C) NAME fwscanf( ), wscanf( ), swscanf( ) - convert formatted wide-character input SYNOPSIS #include #include int fwscanf(FILE *stream, const wchar_t *format, ... ); int wscanf(const wchar_t *format, ... ); int swscanf(const wchar_t *s, const wchar_t *format, ... ); DESCRIPTION The fwscanf() function reads from the named input stream. The wscanf() function reads from the standard input stream stdin. The swscanf() reads from the wide-character string s.
fwscanf(3C) fwscanf(3C) double. If an h, l (ell) or L appears with any other conversion wide-character, the behavior is undefined. • A conversion wide-character that specifies the type of conversion to be applied. The valid conversion wide-characters are described below. The fwscanf() functions execute each directive of the format in turn. If a directive fails, as detailed below, the function returns.
fwscanf(3C) s fwscanf(3C) Matches a sequence of non white-space wide-characters. If no l (ell) qualifier is present, characters from the input field are converted as if by repeated calls to the wcrtomb() function, with the conversion state described by an mbstate_t object initialized to zero before the first wide-character is converted.
fwscanf(3C) fwscanf(3C) matching failure, execution of the following conversion specification (if any) is terminated with an input failure. Reaching the end of the string in swscanf() is equivalent to encountering end-of-file for fwscanf(). If conversion terminates on a conflicting input, the offending input is left unread in the input. Any trailing white space (including newline) is left unread unless matched by a conversion specification.
fwscanf(3C) fwscanf(3C) AUTHOR fwscanf(), wscanf(), swscanf() were developed by HP and Mitsubishi Electric Corporation. SEE ALSO getwc(3C), fwprintf(3C), setlocale(3C), wcstod(3C), wcstol(3C), wcstoul(3C), wcrtomb(3C), langinfo(5), orientation(5), thread_safety(5).
getaddrinfo(3N) getaddrinfo(3N) NAME getaddrinfo(), getnameinfo(), freeaddrinfo(), gai_strerror() - get hostname and address entry SYNOPSIS #include #include
getaddrinfo(3N) getaddrinfo(3N) If an AI_V4MAPPED flag is specified with an ai_family value of AF_INET6, getaddrinfo() returns IPv4-mapped IPv6 addresses when it does not find any matching IPv6 addresses. getaddrinfo() ignores an AI_V4MAPPED flag if the ai_family is not equal to AF_INET6. If an AI_ALL flag is used with an AI_V4MAPPED flag, getaddrinfo() returns all the matching IPv6 and IPv4 addresses. getaddrinfo() ignores an AI_ALL flag without an AI_V4MAPPED flag.
getaddrinfo(3N) getaddrinfo(3N) #include #include void freeaddrinfo(struct addrinfo *ai); The addrinfo structure pointed to by the ai argument is freed, along with any dynamic storage pointed to by the structure. This operation is repeated until a NULL ai_next pointer is encountered. gai_strerror() To aid applications in printing error messages based on the EAI_xxx codes returned by getaddrinfo(), the gai_strerror function is defined. #include #include
getaddrinfo(3N) getaddrinfo(3N) If the flag bit NI_NAMEREQD is set, an error is returned if the host’s name cannot be located in the DNS. If the flag bit NI_NUMERICSERV is set, the numeric form of the service address is returned (e.g., its port number) instead of its name. The two NI_NUMERICxxx flags are required to support the -n flag that many commands provide.
getaddrinfo(3N) getaddrinfo(3N) New applications must use the APIs getaddrinfo() and getnameinfo() for name/address resolution. AUTHOR getaddrinfo() was developed by HP. FILES /etc/hosts /etc/services SEE ALSO gethostent(3N), resolver(3N), nsswitch.conf(4).
getbegyx(3X) getbegyx(3X) (ENHANCED CURSES) NAME getbegyx, getmaxyx, getparyx — get additional cursor and window coordinates SYNOPSIS #include void getbegyx(WINDOW *win, int y, int x); void getmaxyx(WINDOW *win, int y, int x); void getparyx(WINDOW *win, int y, int x); DESCRIPTION The getbegyx() macro stores the absolute screen coordinates of the specified window’s origin in y and x.
getbootpent(3X) getbootpent(3X) NAME getbootpent(), putbootpent(), setbootpent(), parse_bp_iaddr() - get or put bootptab entry endbootpent(), parse_bp_htype(), parse_bp_haddr(), SYNOPSIS #include
getbootpent(3X) getbootpent(3X) entry in the /etc/bootptab file (or from an alternate file specified by a call to setbootpent()), including leading, or embedded, comment lines. Each subsequent call returns a pointer to the next entry in the file so that successive calls can be used to search the entire file. If no file is currently in memory, getbootpent() reads the /etc/bootptab file prior to doing its work.
getbootpent(3X) getbootpent(3X) The returned array elements are in the same order as data fields and comment lines appear in the file. Entry field strings are of the form: tag [@ ] [="value" ] with surrounding whitespace, if any, removed (see bootpd (1M) for the full description). Double quotes, and backslashes, can appear anywhere in the field strings. Template entries (those referred to by other entries using tc fields) are not special. They can be managed like other entries.
getbootpent(3X) getbootpent(3X) if (putbootpent (bp, fields, newfilep)) { (handle error) } } if (fields < 0) { (handle error) } /* error reading file */ if (endbootpent()) { (handle error) } A gA if (fclose (newfilep)) { (handle error) } The following code fragment saves a copy of a bootptab entry returned by getbootpent(). #include #include #include
getc(3S) getc(3S) NAME getc(), getc_unlocked(), getchar(), getchar_unlocked(), fgetc(), getw(), getw_unlocked() - get character or word from a stream file SYNOPSIS #include int getc(FILE *stream); int getc_unlocked(FILE *stream); int getchar(void); int getchar_unlocked(void); int fgetc(FILE *stream); int getw(FILE *stream); Obsolescent Interface int getw_unlocked(FILE *stream); DESCRIPTION getc() Returns the next character (i.e.
getc(3S) getc(3S) [EAGAIN] The O_NONBLOCK flag is set for the file descriptor underlying stream and the process would be delayed in the read operation. [EBADF] The file descriptor underlying stream is not a valid file descriptor open for reading. [EINTR] The read operation was terminated due to the receipt of a signal, and either no data was transferred or the implementation does not report partial transfer for this file.
getc(3S) getc(3S) getw(): AES, SVID2, SVID3, XPG2, XPG3, XPG4 A HP-UX 11i Version 2: August 2003 −3− Hewlett-Packard Company Section 3−−351 gA
getcchar(3X) getcchar(3X) (ENHANCED CURSES) NAME getcchar — get a wide character string and rendition from a cchar_t SYNOPSIS #include
getch(3X) getch(3X) (CURSES) NAME getch, wgetch, mvgetch, mvwgetch — get a single-byte character from the terminal SYNOPSIS #include int getch(void); int mvgetch(int y, int x); int mvwgetch(WINDOW *win, int y, int x); int wgetch(WINDOW *win); DESCRIPTION These functions read a single-byte character from the terminal associated with the current or specified window. The results are unspecified if the input is not a single-byte character.
getclock(3C) getclock(3C) NAME getclock - get current value of system-wide clock SYNOPSIS #include int getclock(int clock_type, struct timespec *tp); DESCRIPTION The getclock() function gets the current value tp of the specified system-wide clock, clock_type. getclock() supports a clock_type of TIMEOFDAY, defined in , which represents the time-of-day clock for the system. For this clock, the values returned by getclock() represent the amount of time since the Epoch.
getcwd(3C) getcwd(3C) NAME getcwd( ) - get pathname of current working directory SYNOPSIS #include char *getcwd(char *buf, size_t size); DESCRIPTION The getcwd() function places the absolute pathname of the current working directory in the array pointed to by buf , and returns buf . The value of size must be at least one greater than the length of the pathname to be returned. If buf is a NULL pointer, getcwd() obtains size bytes of space using malloc() (see malloc (3C)).
getdate(3C) getdate(3C) NAME getdate() - convert user format date and time SYNOPSIS #include struct tm *getdate(const char *string); Obsolescent Interface int getdate_r(const char *string, struct tm *result, int *errnum); DESCRIPTION The getdate() function converts user definable date and/or time specifications pointed to by string into a struct tm. The structure declaration is in the header file (see ctime (3C)).
getdate(3C) getdate(3C) The following example shows the possible contents of a template: %m %A %B %d, %Y, %H:%M:%S %A %B %m/%d/%y %I %p %d,%m,%Y %H:%M at %A the %dst of %B in %Y run job at %I %p, %B %dnd %A den %d. %B %Y %H.
getdate(3C) getdate(3C) Input Mon Sun Fri September January December Sep Mon Jan Fri Dec Mon Jan Wed 1989 Fri 9 Feb 10:30 10:30 13:30 A gA Line in Template %a %a %a %B %B %B %b %a %b %a %b %a %b %a %Y %a %H %b %H:%S %H:%M %H:%M Date Mon Sep 22 12:19:47 EDT 1986 Sun Sep 28 12:19:47 EDT 1986 Fri Sep 26 12:19:47 EDT 1986 Mon Sep 1 12:19:47 EDT 1986 Thu Jan 1 12:19:47 EST 1987 Mon Dec 1 12:19:47 EST 1986 Mon Sep 1 12:19:47 EDT 1986 Fri Jan 2 12:19:47 EST 1987 Mon Dec 1 12:19:47 EST 1986 Wed Jan 4 12:19:47
getdiskbyname(3C) getdiskbyname(3C) NAME getdiskbyname( ) - get disk description by its name SYNOPSIS #include struct disktab *getdiskbyname(const char *name); Obsolescent Interface int getdiskbyname_r( const char *name, struct disktab *result, char *buffer, int buflen); DESCRIPTION getdiskbyname() takes a disk name (such as hp7959B) and returns a pointer to a structure that describes its geometry information and the standard disk partition tables.
getdvagent(3) getdvagent(3) NAME getdvagent, getdvagnam, setdvagent, enddvagent, putdvagnam, copydvagent - manipulate device assignment database entry for a trusted system SYNOPSIS #include #include #include
getdvagent(3) getdvagent(3) table of character string pointers, whose last entry is a NULL pointer. fd_users is a pointer to a null-terminated table of character string pointers referring to user allowed access. For trusted system versions supporting network connections, the device name can be a 12 character host name, where the first 8 characters are the ASCII hex address of the device, and the last 4 characters are ASCII zeroes. For example, a host with Internet address 129.75.0.
getenv(3C) getenv(3C) NAME getenv( ) - return value for environment name SYNOPSIS #include char *getenv(const char *name); DESCRIPTION getenv() searches the environment list (see environ (5)) for a string of the form name =value, and returns a pointer to the value in the current environment if such a string is present, otherwise a NULL pointer.
getfsent(3X) getfsent(3X) (TO BE OBSOLETED) NAME getfsent( ), getfsspec( ), getfsfile( ), getfstype( ), setfsent( ), endfsent( ) - get file system descriptor file entry SYNOPSIS #include struct checklist *getfsent(void); struct checklist *getfsspec(const char *spec); struct checklist *getfsfile(const char *file); struct checklist *getfstype(const char *type); int setfsent(void); int endfsent(void); Remarks: These routines are included only for compatibility with 4.2 BSD.
getfsent(3X) getfsent(3X) (TO BE OBSOLETED) FILES /etc/fstab SEE ALSO fstab(4).
getgrent(3C) getgrent(3C) NAME getgrent( ), getgrgid( ), getgrgid_r( ), getgrnam( ), getgrnam_r( ), setgrent( ), endgrent( ), fgetgrent( ) - get group file entry SYNOPSIS #include
getgrent(3C) getgrent(3C) Obsolescent Interfaces getgrent_r(), setgrent_r(), endgrent_r(), fgetgrent_r() get group file entry. Reentrant Interfaces getgrgid_r() and getgrnam_r() both update the structgroup pointed to by grp and store a pointer to that structure at the location pointed to by result. The structure shall contain an entry from the group database with a matching gid or name.
getgrent(3C) getgrent(3C) getgrnam(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.1 setgrent(): SVID2, SVID3, XPG2 getgrnam_r(), getgrgid_r(): POSIX.
gethostent(3N) gethostent(3N) NAME gethostent(), gethostbyaddr(), gethostbyname(), sethostent(), endhostent() - get network host entry SYNOPSIS #include #include #include
gethostent(3N) gethostent(3N) gethostent() Always returns a NULL pointer. sethostent() Requests the use of a connected stream socket for queries to the name server if the stayopen flag is non-zero. The connection is retained after each call to gethostbyname() or gethostbyaddr(). endhostent() Closes the stream socket connection. gethostbyname() gethostbyaddr() Each retrieves host information from the name server. Names are matched without respect to uppercase or lowercase. For example, berkeley.
gethostent(3N) gethostent(3N) In a multithreaded application, gethostent(), gethostbyaddr(), and gethostbyname() use thread-specific storage that is re-used in each call. The return value, struct hostent, should be unique for each thread and should be saved, if desired, before the thread makes the next gethost*() call.
gethostent(3N) gethostent(3N) main(int argc, const char **argv) { u_int addr; struct hostent *hp; char **p; if (argc != 2) { (void) printf("usage: %s IP-address\n",argv[0]); exit (1); } if ((int) (addr = inet_addr (argv[1])) == -1) { (void) printf("IP-address must be of the form a.b.c.
gethostent(3N) gethostent(3N) The reentrant routines return -1 if the operation is unsuccessful, or, in the case of gethostent_r(), if the end of the hosts list has been reached. 0 is returned otherwise. AUTHOR gethostent() was developed by Sun Microsystems Inc. FILES /etc/hosts SEE ALSO named(1M), ypserv(1M), thread_safety(5). resolver(3N), ypclnt(3C), hosts(4), nsswitch.
gethrtime(3C) gethrtime(3C) NAME gethrtime( ) - get high resolution time SYNOPSIS #include hrtime_t gethrtime(void); DESCRIPTION The gethrtime() function returns the current high-resolution real time. Time is expressed as nanoseconds since a certain time in the past. This API uses a fast light weight system call to get the nanoseconds from a certain time. It is not correlated in any way to the time of day.
getlogin(3C) getlogin(3C) NAME getlogin( ), getlogin_r( ) - get name of user logged in on this terminal SYNOPSIS #include char *getlogin(void); int getlogin_r(char *buf, size_t buflen); DESCRIPTION The getlogin() function retrieves the name of the user currently logged in on a terminal associated with the calling process, as found in user-accounting database maintained by utmpd (1M). At least one of the standard input, standard output, or standard error must be a terminal.
getlogin(3C) getlogin(3C) WARNINGS Users of getlogin_r() should note getlogin_r() now conforms with the POSIX.1c Threads standard. The old prototype of getlogin_r() is supported for compatibility with existing DCE applications only. SEE ALSO getuid(2), getgrent(3C), getpwent(3C), utmpd(1M), thread_safety(5). STANDARDS CONFORMANCE getlogin(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.1 getlogin_r(): POSIX.
getmntent(3X) getmntent(3X) NAME getmntent( ), getmntent_r( ), setmntent( ), addmntent( ), delmntent( ), endmntent( ), hasmntopt( ) - get file system descriptor file entry SYNOPSIS #include
getmntent(3X) hasmntopt() getmntent(3X) Scans the mnt_opts field of the mntent structure mnt for a substring that matches opt . It returns the address of the substring if a match is found. Otherwise, the return value takes one of the following default behaviors : Option String Corresponding Default Behavior MNTOPT_RW If the mnt_opts does not have the MNTOPT_RO option, MNTOPT_RW is returned. Otherwise, NULL is returned.
getmntent(3X) #define #define #define #define getmntent(3X) MNTOPT_MIN MNTOPT_LIM MNTOPT_RES MNTOPT_PRI "min" "lim" "res" "pri" /* /* /* /* minimum file system swap */ maximum file system swap */ reserve space for file system */ file system swap priority */ NETWORKING FEATURES NFS The following definitions are provided in
getmntent(3X) getmntent(3X) } return(retval); APPLICATION USAGE Data integrity is not guaranteed when reading the mntent data because setmntent() does not lock the file when opening it with read-only permission. To overcome this, as one approach, programs may need to loop until the last modification time and file size before and after reading the file are the same. The following code achieves the data integrity.
getmntent(3X) getmntent(3X) Use of a text editor to manipulate the file accessed by these APIs is not supported. setmntent() and endmntent() are safe for per process locking. setmntent(), getmntent(), addmntent(), delmntent(), hasmntent(), and endmntent() are not safe to be called by a child process after fork() but before exec(). AUTHOR addmntent(), endmntent(), getmntent(), hasmntopt(), and setmntent() were developed by The University of California, Berkeley, Sun Microsystems, Inc., and HP.
getnetconfig(3N) getnetconfig(3N) NAME getnetconfig(), setnetconfig(), endnetconfig(), getnetconfigent(), nc_sperror() - get network configuration database entry freenetconfigent(), nc_perror(), SYNOPSIS #include
getnetconfig(3N) getnetconfig(3N) RETURN VALUES setnetconfig() returns a unique handle to be used by getnetconfig(). In the case of an error, setnetconfig() returns NULL and nc_perror() or nc_sperror() can be used to print the reason for failure. getnetconfig() returns a pointer to the current entry in the netconfig() database, formatted as a struct netconfig. getnetconfig() returns NULL at the end of the file, or upon failure.
getnetent(3N) getnetent(3N) NAME getnetent(), getnetbyaddr(), getnetbyname(), setnetent(), endnetent() - get network entry SYNOPSIS #include #include
getnetent(3N) getnetent(3N) Name Service Switch-Based Operation The library routines getnetbyname(), getnetbyaddr(), and getnetent() internally call the name service switch to access the "networks" database lookup policy configured in the /etc/nsswitch.conf file (see nsswitch.conf(4)). The lookup policy defines the order and the criteria of the supported name services used to resolve network names and addresses.
getnetgrent(3C) getnetgrent(3C) NAME getnetgrent(), setnetgrent(), endnetgrent(), innetgr() - get network group entry SYNOPSIS int innetgr( char *netgroup, char *machine, char *user, char *domain ); int setnetgrent(char *netgroup); int endnetgrent(); int getnetgrent( char **machinep, char **userp, char **domainp ); DESCRIPTION These functions are used to test membership in and enumerate members of "netgroup" network groups defined in a system database.
getnetgrent(3C) MULTITHREAD USAGE Thread Safe: Cancel Safe: Fork Safe: Async-cancel Safe: Async-signal Safe: getnetgrent(3C) Yes Yes No No No These functions can be called safely in a multithreaded environment. They may be cancellation points in that they call functions that are cancel points. In a multithreaded environment, these functions are not safe to be called by a child process after fork() and before exec().
getnetpath(3N) getnetpath(3N) NAME getnetpath(), setnetpath(), endnetpath() - get /etc/netconfig entry corresponding to NETPATH component SYNOPSIS #include struct netconfig *getnetpath(void *handlep ); void *setnetpath(void); int endnetpath(void *handlep ); MULTITHREAD USAGE Thread Safe: Cancel Safe: Fork Safe: Async-cancel Safe: Async-signal Safe: Yes Yes No No No These functions can be called safely in a multithreaded environment.
getnstr(3X) getnstr(3X) (ENHANCED CURSES) NAME getnstr, mvgetnstr, mvwgetnstr, wgetnstr, — get a multi-byte character length limited string from the terminal SYNOPSIS #include
getn_wstr(3X) getn_wstr(3X) (ENHANCED CURSES) NAME getn_wstr, get_wstr, mvgetn_wstr, mvget_wstr, mvwgetn_wstr, mvwget_wstr, wgetn_wstr, wget_wstr — get an array of wide characters and function key codes from a terminal SYNOPSIS #include
getopt(3C) getopt(3C) NAME getopt( ), optarg, optind, opterr - get option letter from argument vector SYNOPSIS #include int getopt(int argc, char * const argv[], const char *optstring); extern char *optarg; extern int optind, opterr, optopt; DESCRIPTION getopt() returns the next option letter in argv (starting from argv [ 1 ]) that matches a letter in optstring . argc and argv are the argument count and argument array as passed to main().
getopt(3C) getopt(3C) EXAMPLES The following code fragment shows to process arguments for a command that can take the mutually exclusive options a and b, and the options f and o, both of which require arguments: #include #include main (int argc, char *argv[]) { int c; int bflg, aflg, errflg; extern char *optarg; extern int optind, optopt; . . .
getopt(3C) getopt(3C) SEE ALSO getopt(1), thread_safety(5). STANDARDS CONFORMANCE getopt(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, POSIX.2 optarg: AES, SVID2, SVID3, XPG2, XPG3, XPG4, POSIX.2 opterr: AES, SVID2, SVID3, XPG2, XPG3, XPG4, POSIX.2 optind: AES, SVID2, SVID3, XPG2, XPG3, XPG4, POSIX.2 optopt: AES, SVID3, XPG4, POSIX.
getpass(3C) getpass(3C) (TO BE OBSOLETED) NAME getpass( ) - read a password SYNOPSIS #include char *getpass(const char *prompt); DESCRIPTION getpass() reads up to a newline or EOF from the file /dev/tty, after prompting on the standard error output with the null-terminated string prompt and disabling echoing. A pointer is returned to a null-terminated string of at most 8 characters. If /dev/tty cannot be opened, a NULL pointer is returned.
getprdfent(3) getprdfent(3) NAME getprdfent, getprdfnam, setprdfent, endprdfent, putprdfnam - manipulate system default database entry for a trusted system SYNOPSIS #include #include #include
getprdfent(3) getprdfent(3) A call to setprdfent has the effect of rewinding the default control file to allow repeated searches. endprdfent can be called to close the database when processing is complete. putprdfnam puts a new or replaced default control entry pr with key name into the database. If the prg.fd_name field is 0, the requested entry is deleted from the system default database.
getprotoent(3N) getprotoent(3N) NAME getprotoent(), getprotobynumber(), getprotobyname(), setprotoent(), endprotoent() - get protocol entry SYNOPSIS #include
getprotoent(3N) getprotoent(3N) RETURN VALUE getprotoent(), getprotobyname(), and getprotobynumber() return a null pointer (0) on EOF or when they are unable to open /etc/protocols.
getprpwent(3) getprpwent(3) NAME getprpwent, getprpwuid, getprpwnam, getprpwaid, setprpwent, endprpwent, putprpwnam - manipulate protected password database entries (for trusted systems only). SYNOPSIS #include #include #include
getprpwent(3) int char int char getprpwent(3) fd_nlogins; fd_unsuctty[14]; fd_max_tries; fd_lock; /* /* /* /* consecutive unsuccessful logins */ tty of last unsuccessful login */ maximum unsuc login tries allowed */ Unconditionally lock account? */ }; struct pr_flag { unsigned short /* Identity: */ fg_name:1, fg_uid:1, fg_encrypt:1, fg_owner:1, fg_boot_auth:1, fg_pw_audid:1, fg_pw_audflg:1, /* /* /* /* /* /* /* /* Password maintenance fg_min:1, fg_maxlen:1, fg_expire:1, fg_lifetime:1, fg_schange:1,
getprpwent(3) getprpwent(3) fd_owner is the user name accountable for the account. The fd_boot_auth field is used when the system default file specifies boot authorization is required. init (1M) prompts for a user name and password. If the authentication succeeds, a value in this field allows the user to continue the system boot process. fd_min is the time, in seconds, that must elapse before the user can change passwords. fd_maxlen is the maximum password length (in characters) for the user.
getprpwent(3) getprpwent(3) getprpwnam searches from the beginning of the database until a login name matching name is found, and returns a pointer to the particular structure in which it was found. If an end-of-file or an error is encountered on reading, these functions return a NULL pointer. A call to setprpwent has the effect of rewinding the protected password database to allow repeated searches. endprpwent can be called to close the protected password database when processing is complete.
getprpwent(3) getprpwent(3) SEE ALSO authcap(4), getpwent(3C), getprdfent(3), prpwd(4), ttsyncd(1M), nis+(1).
getprtcent(3) getprtcent(3) NAME getprtcent, getprtcnam, setprtcent, endprtcent, putprtcnam - manipulate terminal control database entry for a trusted system SYNOPSIS #include #include #include
getprtcent(3) getprtcent(3) Note that ufld and uflg refer to user-specific entries, and sfld and sflg refer to the system default values (see authcap (4)). The value returned by getprtcent or getprtcnam refers to a structure that is overwritten by calls to these routines. To retrieve an entry, modify it, and replace it in the database, copy the entry using structure assignment and supply the modified buffer to putprtcnam.
getpublickey(3N) getpublickey(3N) NAME getpublickey(), getsecretkey(), publickey() - retrieve public or secret key SYNOPSIS #include #include
getpw(3C) getpw(3C) (TO BE OBSOLETED) NAME getpw( ) - get name from UID SYNOPSIS #include int getpw(uid_t uid, char *buf); DESCRIPTION getpw() searches the password file for a user ID number that equals uid, copies the line of the password file in which uid was found into the array pointed to by buf, and returns 0. getpw() returns non-zero if uid cannot be found. The line is null-terminated.
getpwent(3C) getpwent(3C) NAME getpwent(), getpwuid(), getpwuid_r(), getpwnam(), getpwnam_r(), setpwent(), endpwent(), fgetpwent() get password file entry SYNOPSIS #include
getpwent(3C) getpwent(3C) found. fgetpwent() Unlike the other functions above, does not use nsswitch.conf, nor access NIS or NIS+. It returns a pointer to the next passwd structure in the standard I/O stream stream , which should be open for reading, and its contents should match the format of /etc/passwd. Obsolescent Interfaces getpwent_r(), setpwent_r(), endpwent_r(), fgetpwent_r() get password file entry.
getpwent(3C) getpwent(3C) Users of getpwuid_r() and getpwnam_r() should note that these interfaces now conform with POSIX.1c. getpwent_r(), setpwent_r(), endpwent_r() and fgetpwent_r() are obsolescent interfaces. These interfaces and the old prototypes of getpwuid_r() and getpwnam_r() are supported for compatibility with existing DCE applications only. The interfaces getpwuid(), getpwnam(), getpwent(), setpwent(), endpwent(), fgetpwent(), getpwuid_r() and getpwnam_r() use the Dynamic Name Service Switch.
getresuid(3) getresuid(3) NAME getresuid, getresgid - get real, effective and saved user or group IDs SYNOPSIS int getresuid (uid_t *ruid, uid_t *euid, uid_t *suid); int getresgid (gid_t *rgid, gid_t *egid, gid_t *sgid); DESCRIPTION getresuid and getresgid return the real, effective, and saved user or group ID’s of the current process. RETURN VALUE On error, the return is -1, and errno is set appropriately. On success the return is 0.
getrpcent(3C) getrpcent(3C) NAME getrpcent( ), getrpcbyname( ), getrpcbynumber( ), - get rpc entry SYNOPSIS cc [ flag . . . ] file . . . -lnsl [ library . . . ] #include struct rpcent *getrpcent(); struct rpcent *getrpcbyname(char *name); struct rpcent *getrpcbynumber(int number); int setrpcent(int stayopen); int endrpcent(); DESCRIPTION These functions are used to obtain entries for RPC (Remote Procedure Call) services.
getrpcent(3C) getrpcent(3C) long r_number; /* rpc program number */ }; The functions getrpcbyname(), and getrpcbynumber() each return a pointer to a struct rpcent if they successfully locate the requested entry; otherwise they return NULL. The function getrpcent() returns a pointer to a struct rpcent if it successfully enumerates an entry; otherwise it returns NULL, indicating the end of the enumeration.
getrpcport(3N) getrpcport(3N) NAME getrpcport( ) - get RPC port number SYNOPSIS int getrpcport( char *host, int prognum, int versnum, int proto ); DESCRIPTION getrpcport() returns the port number for version versnum of the RPC program prognum running on host and using protocol proto . It returns 0 if it cannot contact portmap or if prognum is not registered. If prognum is registered but not with version versnum , it returns the port number of the last registered (prognum , proto ) pair.
gets(3S) gets(3S) NAME gets(), fgets(), fgets_unlocked() - get a string from a stream SYNOPSIS #include char *gets(char *s); char *fgets(char *s, int n, FILE *stream); Obsolescent Interface char *fgets_unlocked(char *s, int n, FILE *stream); DESCRIPTION A gA gets() Reads characters from the standard input stream, stdin, into the array pointed to by s, until a new-line character is read or an end-of-file condition is encountered.
getservent(3N) getservent(3N) NAME getservent(), getservbyport(), getservbyname(), setservent(), endservent() - get service entry SYNOPSIS #include
getservent(3N) getservent(3N) order and the criteria of the supported name services used to resolve service names and ports.
getspent(3C) getspent(3C) NAME getspnam(), getspnam_r(), getspent(), setspent(), endspent(), fgetspent() - access shadow password entries SYNOPSIS #include
getspent(3C) getspent(3C) The routines getspent(), getspnam() and getspnam_r() depend on the configuration of the /etc/nsswitch.conf file. See nsswitch.conf(4). Entries may reside in any repository specified in /etc/nsswitch.conf. These routines use the switch for the passwd database; for example, an entry in /etc/nsswitch.conf would contain "passwd: nis files" . Programs using these routines must be compiled with -lsec.
getspwent(3X) getspwent(3X) NAME getspwent(), getspwuid(), getspwaid(), getspwnam(), setspwent(), endspwent(), fgetspwent(), getspwent_r(), getspwuid_r(), getspwaid_r(), getspwnam_r(), setspwent_r(), endspwent_r(), fgetspwent_r() - get secure password file entry on trusted systems SYNOPSIS #include
getspwent(3X) getspwent(3X) Since the s_passwd structure is declared in the header file, it is unnecessary to redeclare it. To access other fields in the protected password database that are not included in the s_passwd structure, use getprpwent(). See getprpwent (3) for more information. A gA getspwent() When first called, getspwent() returns a pointer to each s_passwd structure obtained from the protected password database for each user in sequence.
getspwent(3X) getspwent(3X) Obsolescent Interfaces The following interfaces are to be obsoleted: getspwent_r(), getspwuid_r(), getspwaid_r(), getspwnam_r(), setspwent_r(), endspwent_r(), and fgetspwent_r(). EXAMPLES The following code excerpt counts the number of entries in the protected password database: int count = 0; struct s_passwd *pwbuf; setspwent(); while (pwbuf=getspwent()) count++; endspwent(); AUTHOR getspwent() was developed by HP.
getstr(3X) getstr(3X) (CURSES) NAME getstr, mvgetstr, mvwgetstr, wgetstr — get a multi-byte character string from the terminal SYNOPSIS #include int getstr(char *str); int mvgetstr(int y, int x, char *str); int mvwgetstr(WINDOW *win, int y, int x, char *str); int wgetstr(WINDOW *win, char *str); DESCRIPTION The effect of getstr() is as though a series of calls to getch() were made, until a newline or carriage return is received. The resulting value is placed in the area pointed to by str.
getsubopt(3C) getsubopt(3C) NAME getsubopt( ) - parse suboptions from a string. SYNOPSIS #include int getsubopt(char **optionp, char * const *tokens, char **valuep); DESCRIPTION getsubopt() parses suboptions in a flag argument that were initially parsed by getopt() (see getopt (3C)). These suboptions are separated by commas, and may consist of either a single token, or a token-value pair separated by an equal sign.
getsubopt(3C) A getsubopt(3C) char *options, *value; extern char *optarg; extern int optind; . . .
getsubopt(3C) getsubopt(3C) SEE ALSO getopt(3C), thread_safety(5).
gettimer(3C) gettimer(3C) NAME gettimer - get value of a per-process timer SYNOPSIS #include int gettimer(timer_t timerid, struct itimerspec *value); DESCRIPTION The gettimer() function returns an itimerspec structure value to the value argument. The it_value member of the structure represents the amount of time in the current interval before the timer expires for the timer specified in timerid, or zero if the timer is disabled.
gettxt(3C) gettxt(3C) (TO BE OBSOLETED) NAME gettxt() - read text string from message file SYNOPSIS #include char *gettxt(char *msg_id, char *def_str); DESCRIPTION The gettxt() routine retrieves a text string from a message file for the current locale. msg_id has the following syntax: msgfilename :msgnumber where msgfilename is the name of the message file generated by mkmsgs(1). If msgfilename is NULL, gettxt() uses the message file specified in the last call to setcat (3C).
getusershell(3C) getusershell(3C) NAME getusershell( ), setusershell( ), endusershell( ) - get legal user shells SYNOPSIS #include char *getusershell(void); void setusershell(void); void endusershell(void); Obsolescent Interfaces char *getusershell_r(char **shell_datap); void setusershell_r(char **shell_datap); void endusershell_r(char **shell_datap); DESCRIPTION getusershell() A gA Returns a pointer to the first legal user shell as defined in the file /etc/shells (see shells (4)).
getut(3C) getut(3C) (TO BE OBSOLETED) NAME getutent( ), getutid( ), getutline( ), pututline( ), _pututline( ), setutent( ), endutent( ), utmpname( ) - access utmp file entry SYNOPSIS #include
getut(3C) getut(3C) (TO BE OBSOLETED) LOGIN_PROCESS, USER_PROCESS, or DEAD_PROCESS, getutid() returns a pointer to the first entry whose type is one of these four, and whose ut_id field matches id−>ut_id . If end-of-file is reached without a match, getutid() fails. A gA getutline() Searches forward from the current point in the utmp file until it finds an entry of type LOGIN_PROCESS or USER_PROCESS that also has a ut_line string matching the line −>ut_line string.
getut(3C) getut(3C) (TO BE OBSOLETED) Reentrant Interfaces Upon successful completion, getutent_r(), getutid_r(), pututline_r() return 0. Otherwise, they all return -1 and set errno. getutline_r() and ERRORS Reentrant Interfaces [EINVAL] utmp or ud parameter is equal to NULL . WARNINGS getutent_r(), getutid_r(), getutline_r(), pututline_r(), setutent_r(), endutent_r(), and utmpname_r() are obsolescent interfaces supported only for compatibility with existing DCE applications.
getuts(3C) getuts(3C) NAME getuts: getutsent(), getutsid(), getutsline(), pututsline(), setutsent(), endutsent() - access/update routines for user-accounting database maintained by utmpd(1M) SYNOPSIS #include
getuts(3C) getuts(3C) current position in the internal ordering for the getutsent() API. If ut_type specified is RUN_LVL, BOOT_TIME, OLD_TIME, or NEW_TIME, getutsid() fetches an entry with a ut_type matching id->ut_type . If no matching entry is found getutsid() fails and returns NULL. The macro GETUTSID() is a wrapper around getutsid() and implicitly passes the utmps_size parameter to getutsid(). getutsline() This is similar to getutsid().
getuts(3C) getuts(3C) RETURN VALUE getutsent(), getutsid(), getutsline(), pututsline(), and getutspid() return a pointer to static utmps structure on success. On failure they return NULL. ERRORS [EINVAL] The size parameter passed to the getuts functions does not match any of the structure sizes supported by the server.
getutx(3C) getutx(3C) NAME getutxent( ), getutxid( ), getutxline( ), pututxline( ), setutxent( ), endutxent( ) - access utmpx file entry SYNOPSIS #include
getutx(3C) getutx(3C) setutxent() Resets the input stream to the beginning of the file. This should be done before each search for a new entry if it is desired that the entire file be examined. endutxent() Closes the currently open file. The most current entry is saved in a static structure. Multiple accesses require that the structure be copied before further accesses are made. During each call to either getutxid() or getutxline(), the static structure is examined before performing more I/O.
getwc(3C) getwc(3C) NAME getwc(), getwchar(), fgetwc(), getwc_unlocked(), getwchar_unlocked(), fgetwc_unlocked() - get a wide character from a stream file SYNOPSIS #include wint_t getwc(FILE *stream); wint_t getwchar(void); wint_t fgetwc(FILE *stream); Obsolescent Interfaces wint_t getwc_unlocked(FILE *stream); wint_t getwchar_unlocked(void); wint_t fgetwc_unlocked(FILE *stream); Remarks These functions are compliant with the XPG4 Worldwide Portability Interface wide-character I/O functions.
getwc(3C) getwc(3C) [EILSEQ] The data obtained from the input stream does not form a valid wide character. Additional errno values may be set by the underlying read() function (see read (2)). EXTERNAL INFLUENCES Locale The LC_CTYPE category determines how wide-character conversions are done. International Code Set Support Single- and multibyte character code sets are supported.
getwd(3C) getwd(3C) NAME getwd( ) - get pathname of current working directory SYNOPSIS #include char *getwd(char *buf); DESCRIPTION getwd() places the absolute pathname of the current working directory in the array pointed to by buf , and returns buf . If the length of the pathname of the current working directory is greater than PATH_MAX+1 bytes, getwd() fails and returns a null pointer. RETURN VALUE Upon successful completion, getwd() returns a pointer to the current directory pathname.
getwin(3X) getwin(3X) (ENHANCED CURSES) NAME getwin, putwin — dump window to, and reload window from, a file SYNOPSIS #include WINDOW *getwin(FILE *filep); int putwin(WINDOW *win, FILE *filep); DESCRIPTION The getwin() function reads window-related data stored in the file by putwin(). The function then creates and initialises a new window using that data. The putwin() function writes all data associated with win into the stdio stream to which filep points, using an unspecified format.
getyx(3X) getyx(3X) (CURSES) NAME getyx — get cursor and window coordinates SYNOPSIS #include void getyx(WINDOW *win, int y, int x); DESCRIPTION The getyx() macro stores the cursor position of the specified window in y and x. RETURN VALUE No return values are defined. ERRORS No errors are defined. APPLICATION USAGE These interfaces are macros and ‘&’ cannot be used before the y and x arguments. SEE ALSO getbegyx(3X), . A CHANGE HISTORY First released in X/Open Curses, Issue 2.
get_expiration_time(3T) get_expiration_time(3T) NAME get_expiration_time() - add a specific time interval to the current absolute system time SYNOPSIS #include int get_expiration_time( struct timespec *delta, struct timespec *abstime ); DESCRIPTION The get_expiration_time() function adds a specific time interval to the current absolute system time and returns the new absolute time. This new absolute time is used as the expiration time in a call to pthread_cond_timedwait (3T).
get_wch(3X) get_wch(3X) (ENHANCED CURSES) NAME get_wch, mvget_wch, mvwget_wch, wget_wch — get a wide character from a terminal SYNOPSIS #include int get_wch(wint_t *ch); int mvget_wch(int y, int x, wint_t *ch); int mvwget_wch(WINDOW *win, int y, int x, wint_t *ch); int wget_wch(WINDOW *win, wint_t *ch); DESCRIPTION These functions read a character from the terminal associated with the current or specified window.
glob(3C) glob(3C) NAME glob(), globfree() - file name generation function SYNOPSIS #include int glob( const char *pattern, int flags, int (*errfunc)(const char *, int), glob_t *pglob ); void globfree(glob_t *pglob); DESCRIPTION glob() is a path name generator. pattern is a pointer to a path name pattern to be expanded. If pattern contains any of the special characters *, ?, or [, pattern is matched against all accessible path names.
glob(3C) glob(3C) • The count returned in pglob −> gl_pathc will be the total number of path names from the two calls. • The application can change any of the fields after a call to glob(). If it does, it must reset them to the original value before a subsequent call, using the same pglob value, to globfree() or glob() with the GLOB_APPEND flag.
glob(3C) glob(3C) STANDARDS CONFORMANCE glob(): XPG4, POSIX.2 globfree(): XPG4, POSIX.
grantpt(3C) grantpt(3C) NAME grantpt - grant access to the STREAMS slave pty SYNOPSIS int grantpt (int fildes); DESCRIPTION The passed parameter, fildes , is a file descriptor that is returned from a successful open of a STREAMS master pty (pseudo-terminal) device. The grantpt() function modifies the ownership and mode of the slave pty device special file associated with its master pty counterpart.
gss_accept_sec_context(3) gss_accept_sec_context(3) NAME gss_accept_sec_context( ) - establish a security context between the application and a context acceptor SYNOPSIS #include
gss_accept_sec_context(3) gss_accept_sec_context(3) actual_mech_type Actual mechanism used. Specify NULL if not required. output_token Returns a token to pass to the context acceptor. If no token is to be passed to the context acceptor, the routine sets the length field of the returned token buffer to 0 (zero). ret_flags Returns a bitmask containing six independent flags, each of which requests that the context support a service option.
gss_accept_sec_context(3) False time_rec gss_accept_sec_context(3) The security context is not transferable. Returns the number of seconds for which the context remains valid. This is optional information. If the time is not required, specify NULL. delegated_cred_handle Returns the credential handle for credentials received from the context initiator. The credential handle is valid only if delegated credentials are available.
gss_acquire_cred(3) gss_acquire_cred(3) NAME gss_acquire_cred( ) - allow an application to acquire a handle for an existing, named credential SYNOPSIS #include
gss_acquire_cred(3) gss_acquire_cred(3) GSS_S_NO_CRED No credentials were found for the specified name. GSS_S_FAILURE The routine failed. See the minor_status parameter return value for more information. AUTHOR gss_acquire_cred() was developed by Sun Microsystems, Inc. SEE ALSO gss_init_sec_context(3). The manpages for DCE-GSSAPI are included with the DCE-CoreTools product. To see those manpages add /opt/dce/share/man to MANPATH.
gss_add_cred(3) gss_add_cred(3) NAME gss_add_cred( ) - adds a credential-element to a credential SYNOPSIS #include
gss_add_cred(3) Output Parameters output_cred_handle A gA gss_add_cred(3) The returned credential handle, containing the new credential-element and all the credential-elements from input_cred_handle. If NULL is specified for this parameter, the newly acquired credential-element will be added to the credential identified by input_cred_handle. actual_mechs Returns a set of mechanisms for which the credential is valid. This information is optional.
gss_add_oid_set_member(3) gss_add_oid_set_member(3) NAME gss_add_oid_set_member( ) - add an Object Identifier (OID) to an OID set SYNOPSIS #include OM_uint32 gss_add_oid_set_member ( OM_uint32* minor_status, gss_OID* member_OID, gss_OID_set* OID_set) DESCRIPTION The gss_add_oid_set_member() routine adds a new Object Identifier to an Object Identifier set. If an OID set does not exist, you can create a new, empty OID set with the gss_create_empty_oid_set() routine.
gss_canonicalize_name(3) gss_canonicalize_name(3) NAME gss_canonicalize_name( ) - convert an internal name to an internal mechanism name (MN) representation of an opaque internal name SYNOPSIS #include OM_uint32 gss_canonicalize_name ( OM_uint32 *minor_status, const gss_name_t input_name, const gss_OID *mech_type, gss_name_t *output_name) A gA DESCRIPTION The gss_canonicalize_name() routine generate a canonical mechanism name (MN) from an arbitrary internal name.
gss_compare_name(3) gss_compare_name(3) NAME gss_compare_name( ) - allow an application to compare two internal names to determine whether they are equivalent SYNOPSIS #include OM_uint32 gss_compare_name ( OM_uint32 *minor_status, const gss_name_t name1, const gss_name_t name2, int *name_equal) DESCRIPTION The gss_compare_name() routine lets an application compare two internal names to determine whether they are the same.
gss_context_time(3) gss_context_time(3) NAME gss_context_time( ) - check the number of seconds the context will remain valid SYNOPSIS #include OM_uint32 gss_context_time ( OM_uint32 *minor_status, const gss_ctx_id_t context_handle, OM_int32 *time_rec) DESCRIPTION The gss_context_time() routine checks the number of seconds for which the context will remain valid. Input Parameters context_handle A gA Output Parameters time_rec minor_status Specifies the context to be checked.
gss_create_empty_oid_set(3) gss_create_empty_oid_set(3) NAME gss_create_empty_oid_set( ) - create a new, empty OID set, to which members can be added SYNOPSIS #include OM_uint32 gss_create_empty_oid_set ( OM_uint32 *minor_status, gss_OID_set *OID_set); DESCRIPTION The gss_create_empty_oid_set( ) routine creates a new, empty OID set to which the context initiator can add members. Use the gss_add_oid_set_member( ) routine to add members to the OID set.
gss_delete_sec_context(3) gss_delete_sec_context(3) NAME gss_delete_sec_context( ) - delete a security context SYNOPSIS #include OM_uint32 gss_delete_sec_context ( OM_uint32 *minor_status, gss_ctx_id_t *context_handle, gss_buffer_t output_token_buffer) DESCRIPTION The gss_delete_sec_context( ) routine deletes a security context. It also deletes the local data structures associated with the security context. When it deletes the context, the routine can generate a token.
gss_display_name(3) gss_display_name(3) NAME gss_display_name( ) - provide textual representation of an opaque internal name to an application SYNOPSIS #include OM_uint32 gss_display_name ( OM_uint32 *minor_status, const gss_name_t input_name, gss_buffer_t output_name_buffer, gss_OID *output_name_type) DESCRIPTION The gss_display_name( ) routine provides an application with the text form of an opaque internal name. The application can use the text to display the name but not to print it.
gss_display_status(3) gss_display_status(3) NAME gss_display_status( ) - provide an application with the textual representation of a GSSAPI status code that can be displayed to a user or used for logging SYNOPSIS #include
gss_display_status(3) gss_display_status(3) SEE ALSO The manpages for DCE-GSSAPI are included with the DCE-CoreTools product. To see those manpages add /opt/dce/share/man to MANPATH.
gss_duplicate_name(3) gss_duplicate_name(3) NAME gss_duplicate_name( ) - allow an application to create an exact duplicate of the existing internal name SYNOPSIS #include OM_uint32 gss_duplicate_name ( OM_uint32 *minor_status, const gss_name_t src_name, gss_name_t *dest_name) DESCRIPTION The gss_duplicate_name( ) routine create an exact duplicate of the existing internal name src_name . The new dest_name will be independent of src_name .
gss_export_name(3) gss_export_name(3) NAME gss_export_name() - convert a mechanism name (MN) to a form suitable for direct comparison SYNOPSIS #include OM_uint32 gss_export_name ( OM_uint32 *minor_status, const gss_name_t input_name, gss_buffer_t exported_name) DESCRIPTION The gss_export_name() converts a mechanism name (MN) to export form. Input Parameters input_name Specifies the mechanism name (MN) to be exported.
gss_export_sec_context(3) gss_export_sec_context(3) NAME gss_export_sec_context() - transfer a security context to another process on a single machine SYNOPSIS #include
gss_get_mic(3) gss_get_mic(3) NAME gss_get_mic( ) - calculate a cryptographic message integrity code (MIC) for a message and return in a token SYNOPSIS #include
gss_import_name(3) gss_import_name(3) NAME gss_import_name( ) - convert a printable name to an internal form SYNOPSIS #include OM_uint32 gss_import_name ( OM_uint32 *minor_status, const gss_buffer_t input_buffer_name, const gss_OID input_name_type, gss_name_t *output_name) DESCRIPTION The gss_import_name( ) routine converts a printable name to an internal form.
gss_import_sec_context(3) gss_import_sec_context(3) NAME gss_import_sec_context( ) - transfer a security context to another process on a single machine SYNOPSIS #include OM_uint32 gss_import_sec_context ( OM_uint32 *minor_status, const gss_buffer_t interprocess_token) gss_ctx_id_t *context_handle) DESCRIPTION The gss_import_sec_context( ) routine lets a process to import a security context established by another process. A given interprocess token may be imported only once.
gss_indicate_mechs(3) gss_indicate_mechs(3) NAME gss_indicate_mechs() - allow an application to determine which underlying security mechanisms are available SYNOPSIS #include OM_uint32 gss_indicate_mechs ( OM_uint32 *minor_status, gss_OID_set *mech_set) DESCRIPTION The gss_indicate_mechs( ) routine enables an application to determine which underlying security mechanisms are available. Output Parameters mech_set A gA minor_status Returns the set of supported security mechanisms.
gss_init_sec_context(3) gss_init_sec_context(3) NAME gss_init_sec_context() - establish a security context between the context initiator and a context acceptor SYNOPSIS #include
gss_init_sec_context(3) gss_init_sec_context(3) GSS_C_MUTUAL_FLAG. The True/False values are: True The context acceptor has been asked to authenticate itself. False The context initiator has not been asked to authenticates itself. GSS_C_REPLAY_FLAG. The True/False values are: True Replayed signed or sealed messages will be detected. False Replayed messages will not be detected. GSS_C_SEQUENCE_FLAG. The True/False values are: True Out-of-sequence signed or sealed messages will be detected.
gss_init_sec_context(3) gss_init_sec_context(3) True Replayed signed or sealed messages will be detected. False Replayed messages will not be detected. GSS_C_SEQUENCE_FLAG. The True/False values are: True Out-of-sequence signed or sealed messages will be detected. False Out-of-sequence signed or sealed messages will not be detected. GSS_C_CONF_FLAG. The True/False values are: True Confidentiality service can be invoked by calling the gss_seal() routine.
gss_init_sec_context(3) gss_init_sec_context(3) called again with a token required from the context acceptor. GSS_S_CREDENTIALS_EXPIRED The referenced credentials have expired. GSS_S_DEFECTIVE_CREDENTIAL Consistency checks performed on the credential failed. GSS_S_DEFECTIVE_TOKEN Consistency checks performed on the input_token parameter failed. GSS_S_DUPLICATE_TOKEN The input_token parameter was already processed. This is a fatal error that occurs during context establishment.
gss_inquire_context(3) gss_inquire_context(3) NAME gss_inquire_context() - obtain information about a security context SYNOPSIS #include
gss_inquire_context(3) gss_inquire_context(3) True Out-of-sequence signed or sealed messages will be detected. False Out-of-sequence signed or sealed messages will not be detected. GSS_C_CONF_FLAG. The True/False values are: True Request that confidentiality service be made available False No per-message confidentiality service is required. GSS_C_INTEG_FLAG. The True/False values are: True Request that integrity service be be made available False No per-message integrity service is required.
gss_inquire_cred(3) gss_inquire_cred(3) NAME gss_inquire_cred() - provide the calling application information about a credential SYNOPSIS #include OM_uint32 gss_inquire_cred ( OM_uint32 *minor_status, const gss_cred_id_t cred_handle, gss_name_t *name, OM_uint32 *lifetime, int *cred_usage, gss_OID_set *mechs) DESCRIPTION The gss_inquire_cred() routine provides information about a credential to the calling application.
gss_inquire_cred_by_mech(3) gss_inquire_cred_by_mech(3) NAME gss_inquire_cred_by_mech() - provide the calling application per-mechanism information about a credential SYNOPSIS #include .
gss_inquire_cred_by_mech(3) gss_inquire_cred_by_mech(3) GSS_S_FAILURE The routine failed. Check the minor_status parameter for details. GSS_S_NO_CRED The routine could not access the credentials. AUTHOR gss_inquire_cred_by_mech() was developed by Sun Microsystems, Inc. SEE ALSO gss_acquire_cred(3). The manpages for DCE-GSSAPI are included with the DCE-CoreTools product. To see those manpages add /opt/dce/share/man to MANPATH.
gss_inquire_mechs_for_name(3) gss_inquire_mechs_for_name(3) NAME gss_inquire_mechs_for_name() - list the mechanisms that support the specified name-type SYNOPSIS #include OM_uint32 gss_inquire_mechs_for_name ( OM_uint32 *minor_status, const gss_name_t input_name, gss_OID_set *mech_types) DESCRIPTION The gss_inquire_mechs_for_name() routine returns the set of mechanisms supported by the GSS-API implementation that may be able to process the specified name.
gss_inquire_names_for_mech(3) gss_inquire_names_for_mech(3) NAME gss_inquire_names_for_mech() - list the name-types supported by the specified mechanism SYNOPSIS #include OM_uint32 gss_inquire_names_for_mech ( OM_uint32 *minor_status, const gss_OID *mechanism, gss_OID_set *name_types) DESCRIPTION The gss_inquire_names_for_mech() routine returns the set of nametypes supported by the specified mechanism. Input Parameters mechanism Output Parameters name_types The mechanism to be interrogated.
gss_process_context_token(3) gss_process_context_token(3) NAME gss_process_context_token() - process a context to the security service SYNOPSIS #include OM_uint32 gss_process_context_token ( OM_uint32 *minor_status, const gss_ctx_id_t *context_handle, const gss_buffer_t input_token_buffer) DESCRIPTION The gss_process_context_token() routine passes tokens gss_delete_security_context() routine to the security service.
gss_release_buffer(3) gss_release_buffer(3) NAME gss_release_buffer() - free storage associated with a buffer SYNOPSIS #include OM_uint32 gss_release_buffer ( OM_uint32 *minor_status, gss_buffer_t buffer) DESCRIPTION The gss_release_buffer() routine deletes the buffer by freeing the storage associated with it. Input Parameters buffer The buffer to delete. Output Parameters minor_status Returns a status code from the security mechanism.
gss_release_cred(3) gss_release_cred(3) NAME gss_release_cred() - mark a credential for deletion SYNOPSIS #include OM_uint32 gss_release_cred ( OM_uint32 *minor_status, gss_cred_id_t *cred_handle) DESCRIPTION The gss_release_cred() routine informs the GSSAPI that a credential is no longer required and marks it for deletion. Input Parameters cred_handle A gA Output Parameters minor_status Specifies the buffer containing the opaque credential handle to be released.
gss_release_name(3) gss_release_name(3) NAME gss_release_name() - free storage associated with an internal name allocated by a GSSAPI routine SYNOPSIS #include OM_uint32 gss_release_name ( OM_uint32 *minor_status, gss_name_t *name) DESCRIPTION The gss_release_name() routine deletes the internal name by freeing the storage associated with that internal name. Input Parameters name The name to delete. Output Parameters minor_status Returns a status code from the security mechanism.
gss_release_oid_set(3) gss_release_oid_set(3) NAME gss_release_oid_set() - free storage associated with a gss_OID_set object SYNOPSIS #include OM_uint32 gss_release_oid_set ( OM_uint32 *minor_status, gss_OID_set *set) DESCRIPTION The gss_release_oid_set() routine frees storage that is associated with the gss_OID_set parameter and was allocated by a GSSAPI routine. A gA Input Parameters set The storage associated with the gss_OID_set will be deleted.
gss_test_oid_set_member(3) gss_test_oid_set_member(3) NAME gss_test_oid_set_member() - check an OID set for a specified OID SYNOPSIS #include OM_uint32 gss_test_oid_set_member ( OM_uint32 *minor_status, const gss_OID member_OID, const gss_OID_set set, int* is_present /* 1 = present, 0 = absent */ ); DESCRIPTION The gss_test_oid_set_member() routine checks an OID set to see if the specified OID is a member of the set. To add a member to an OID set, use the gss_add_oid_set_member() routine.
gss_unwrap(3) gss_unwrap(3) NAME gss_unwrap - verify a message with attached message integrity code (MIC) and decrypt message content if necessary SYNOPSIS #include OM_uint32 gss_unwrap ( OM_uint32 *minor_status, gss_ctx_id_t context_handle, gss_buffer_t input_message_buffer, gss_buffer_t output_message_buffer, int *conf_state, gss_qop_t *qop_state) A gA DESCRIPTION The gss_unwrap() routine converts a protected message to a usable form and verifies the embedded message integrity code (MIC).
gss_unwrap(3) gss_unwrap(3) AUTHOR gss_unwrap() was developed by Sun Microsystems, Inc. SEE ALSO gss_get_mic(3), gss_wrap(3).
gss_verify_mic(3) gss_verify_mic(3) NAME gss_verify_mic() - check a cryptographic message integrity code (MIC) against a message to verify its integrity SYNOPSIS #include OM_uint32 gss_verify_mic( OM_uint32 *minor_status, const gss_ctx_id_t context_handle, const gss_buffer_t message_buffer, const gss_buffer_t token_buffer) gss_qop_t *qop_state) DESCRIPTION The gss_verify_mic() routine verifies that a cryptographic MIC, contained in the token_buffer parameter, fits the supplied message.
gss_verify_mic(3) gss_verify_mic(3) The manpages for DCE-GSSAPI are included with the DCE-CoreTools product. To see those manpages add /opt/dce/share/man to MANPATH.
gss_wrap(3) gss_wrap(3) NAME gss_wrap() - attach a message integrity code (MIC) to a message, and optionally encrypt the message content SYNOPSIS #include
gss_wrap(3) gss_wrap(3) SEE ALSO gss_unwrap(3), gss_wrap_size_limit(3). The manpages for DCE-GSSAPI are included with the DCE-CoreTools product. To see those manpages add /opt/dce/share/man to MANPATH.
gss_wrap_size_limit(3) gss_wrap_size_limit(3) NAME gss_wrap_size_limit() - determine a token-size limit for gss_wrap on a context SYNOPSIS #include
halfdelay(3X) halfdelay(3X) (ENHANCED CURSES) NAME halfdelay — control input character delay mode SYNOPSIS #include int halfdelay(int tenths); DESCRIPTION The halfdelay() function sets the input mode for the current window to Half-Delay Mode and specifies tenths tenths of seconds as the half-delay interval. The tenths argument must be in a range from 1 up to and including 255. RETURN VALUE Upon successful completion, halfdelay() returns OK. Otherwise, it returns ERR.
has_ic(3X) has_ic(3X) (CURSES) NAME has_ic, has_il — query functions for terminal insert and delete capability SYNOPSIS #include bool has_ic(void); bool has_il(void); DESCRIPTION The has_ic() function indicates whether the terminal has insert- and delete-character capabilities. The has_il() function indicates whether the terminal has insert- and delete-line capabilities, or can simulate them using scrolling regions.
hline(3X) hline(3X) (ENHANCED CURSES) NAME hline, mvhline, mvvline, mvwhline, mvwvline, vline, whline, wvline — draw lines from single-byte characters and renditions SYNOPSIS #include
hline_set(3X) hline_set(3X) (ENHANCED CURSES) NAME hline_set, mvhline_set, mvvline_set, mvwhline_set, mvwvline_set, vline_set, whline_set, wvline_set — draw lines from complex characters and renditions SYNOPSIS #include
hosts_access(3) hosts_access(3) NAME hosts_access(), hosts_ctl(), request_init(), request_set() - access control library SYNOPSIS #include extern int allow_severity; extern int deny_severity; extern int rfc931_timeout; struct request_info *request_init(request, key, value, ..., 0) struct request_info *request; struct request_info *request_set(request, key, value, ...
hosts_access(3) hosts_access(3) contain valid data or STRING_UNKNOWN. hosts_ctl() returns zero if access should be denied. The allow_severity and deny_severity variables determine how accepted and rejected requests may be logged. They must be provided by the caller and may be modified by rules in the access control tables. The rfc931_timeout variable determines the timeout value for the client’s username lookup. It must be set with a positive value and a value of 0 disables the username lookup.
hppac(3X) hppac(3X) NAME hppac: HPPACADDD(), HPPACCMPD(), HPPACCVAD(), HPPACCVBD(), HPPACCVDA(), HPPACCVDB(), HPPACDIVD(), HPPACLONGDIVD(), HPPACMPYD(), HPPACNSLD(), HPPACSLD(), HPPACSRD(), HPPACSUBD() - HP 3000-mode packed-decimal library SYNOPSIS #include
hppac(3X) hppac(3X) enum HPPAC_CC ∗compcode, int ∗pacstatus ); void HPPACLONGDIVD( unsigned char ∗operand2, int op2digs, unsigned char ∗operand1, int op1digs, enum HPPAC_CC ∗compcode, int ∗pacstatus ); void HPPACMPYD( unsigned char ∗operand2, int op2digs, unsigned char ∗operand1, int op1digs, enum HPPAC_CC ∗compcode, int ∗pacstatus ); A hA void HPPACNSLD( unsigned char ∗operand2, int op2digs, unsigned char ∗operand1, int op1digs, int ∗shift_amt, enum HPPAC_CC ∗compcode, int ∗pacstatus, int ∗carry ); voi
hppac(3X) hppac(3X) DESCRIPTION This set of calls invokes the library functions for emulating 3000-mode (MPE V/E) packed-decimal operations. These functions are in library libcl which is searched when the option -lcl is used with cc or ld(1). HPPACADDD() Performs packed-decimal addition. HPPACCMPD() Compares two packed-decimal numbers. HPPACCVAD() Converts an ASCII representation to packed-decimal. HPPACCVBD() Converts a binary representation to packed-decimal.
hsearch(3C) hsearch(3C) NAME hsearch( ), hcreate( ), hdestroy( ) - manage hash search tables SYNOPSIS #include ENTRY *hsearch(ENTRY item, ACTION action); int hcreate(size_t nel); void hdestroy(void); DESCRIPTION hsearch() is a hash-table search routine generalized from Knuth (6.4) Algorithm D. It returns a pointer into a hash table indicating the location at which an entry can be found.
hsearch(3C) hsearch(3C) /* put info in structure, and structure in item */ item.key = str_ptr; item.data = (char *)info_ptr; str_ptr += strlen(str_ptr) + 1; info_ptr++; /* put item into table */ (void) hsearch(item, ENTER); } /* access table */ item.key = name_to_find; while (scanf("%s", item.
hypot(3M) hypot(3M) NAME hypotf( ), hypotl( ), hypotw( ), hypotq( ) - Euclidean distance functions SYNOPSIS #include double hypot(double x, double y); Itanium(R)-based System Only float hypotf(float x, float y); long double hypotl(long double x, long double y); extended hypotw(extended x, extended y); quad hypotq(quad x, quad y); DESCRIPTION hypot() computes the square root of the sum of the squares of x and y, without undue overflow or underflow.
iconv(3C) iconv(3C) NAME iconv, iconv_open, iconv_close - codeset conversion routines SYNOPSIS #include iconv_t iconv_open(const char *tocode , const char *fromcode ); size_t iconv( iconv_t const char size_t char size_t ); cd , **inbuf , *inbytesleft , **outbuf , *outbytesleft int iconv_close(iconv_t cd ); Remarks These interfaces conform to the XPG4 standard, and should be used instead of the the 9.
iconv(3C) iconv(3C) time of table generation. (See genxlt (1)). iconv_close() Deallocates the conversion descriptor cd and all other associated resources allocated by iconv_open(). APPLICATION USAGE Portable applications must assume that conversion descriptors are not valid after calls to any of the exec functions. Special Usage In state-dependent encodings, the characters are interpreted depending on "state" of the input. State shifts occur when a specific sequence of bytes are seen in the input.
iconv(3C) iconv(3C) EXAMPLES The following example shows how the iconv (3C) interfaces maybe used for conversions. #include #include main() { ... convert("roman8", "iso88591", fd); ...
iconv(3C) iconv(3C) } A /* iconv() returns the number of non-identical conversions * performed. If the entire string in the input buffer is * converted, the value pointed to by inbytesleft will be * zero. If the conversion stopped due to any reason, the * value pointed to by inbytesleft will be non-zero and * errno is set to indicate the condition.
iconv(3C) iconv(3C) AUTHOR iconv was developed by HP. FILES /usr/lib/nls/iconv/tables Directory containing tables used for conversion. /usr/lib/nls/iconv/methods Directory containing methods used for conversion. /usr/lib/nls/iconv/config.iconv Configuration file is used by iconv_open() to check if the requested conversion is supported, and if so, to determine which table and/or method is used for the conversion. SEE ALSO iconv(1), genxlt(1), thread_safety(5).
idcok(3X) idcok(3X) (ENHANCED CURSES) NAME idcok — enable or disable use of hardware insert- and delete-character features SYNOPSIS #include void idcok(WINDOW *win, bool bf); DESCRIPTION The idcok() function specifies whether the implementation may use hardware insert- and deletecharacter features in win if the terminal is so equipped. If bf is TRUE, use of these features in win is enabled. If bf is FALSE, use of these features in win is disabled. The initial state is TRUE.
if_nameindex(3N) if_nameindex(3N) NAME if_nameindex(), if_nametoindex(), if_indextoname(), if_freenameindex() - functions that map between an interface name and index SYNOPSIS #include unsigned int if_nametoindex(const char *ifname); char *if_indextoname(unsigned int ifindex, char *ifname); struct if_nameindex *if_nameindex(void); void if_freenameindex(struct if_nameindex *ptr); DESCRIPTION Interfaces are normally known by names such as "lan0", "vlan200" etc.
if_nameindex(3N) if_nameindex(3N) SEE ALSO ndp(1M), inet6_opt_init(3N), inet6_rth_space(3N), ip6(7P), ndp(7P).
ilogb(3M) ilogb(3M) NAME ilogb( ), ilogbf( ), ilogbl( ), ilogbw( ), ilogbq( ) - radix-independent exponent functions SYNOPSIS #include int ilogb(double x); Itanium(R)-based System Only int ilogbf(float x); int ilogbl(long double x); int ilogbw(extended x); int ilogbq(quad x); DESCRIPTION The ilogb() function computes the exponent of the floating point value x.
immedok(3X) immedok(3X) (ENHANCED CURSES) NAME immedok — enable or disable immediate terminal refresh SYNOPSIS #include void immedok(WINDOW *win, bool bf); DESCRIPTION The immedok() function specifies whether the screen is refreshed whenever the window pointed to by win is changed. If bf is TRUE, the window is implicitly refreshed on each such change. If bf is FALSE, the window is not implicitly refreshed. The initial state is FALSE. RETURN VALUE The immedok() function does not return a value.
inch(3X) inch(3X) (CURSES) NAME inch, mvinch, mvwinch, winch — input a single-byte character and rendition from a window SYNOPSIS #include chtype inch(void); chtype mvinch(int y, int x); chtype mvwinch(WINDOW *win, int y, int x); chtype winch(WINDOW *win); DESCRIPTION These functions return the character and rendition, of type chtype, at the current or specified position in the current or specified window.
inchnstr(3X) inchnstr(3X) (ENHANCED CURSES) NAME inchnstr, inchstr, mvinchnstr, mvinchstr, mvwinchnstr, mvwinchstr, winchnstr, winchstr — input an array of single-byte characters and renditions from a window SYNOPSIS #include
inet(3N) inet(3N) NAME inet: inet_addr(), inet_lnaof(), inet_makeaddr(), inet_netof(), inet_network(), inet_ntoa(), inet_ntoa_r() Internet address manipulation routines SYNOPSIS #include #include #include
inet(3N) inet(3N) All numbers supplied as parts in dot notation can be decimal, octal, or hexadecimal, as specified in the C language (i.e., a leading 0x or 0X implies hexadecimal; a leading 0 implies octal; otherwise, the number is interpreted as decimal). In a multithreaded application, inet_ntoa() uses thread-specific storage that is re-used in each call.
inet6(3N) inet6(3N) NAME inet_pton(), inet_ntop() - Internet address manipulation routines for IP Version 4 and later SYNOPSIS #include #include int inet_pton(int af, const char *src, void *dst); const char *inet_ntop(int af, const void *src, char *dst, size_t size); DESCRIPTION The functions inet_pton() and inet_ntop() are new with IP Version 6 (IPv6) and work with both IP Version 4 (IPv4) and IPv6 addresses. The letters "p" and "n" stand for presentation and numeric.
inet6(3N) inet6(3N) IPv6 addresses in string form, the following two constants are defined in : #define INET_ADDRSTRLEN #define INET6_ADDRSTRLEN 16 46 The inet_ntop() function returns a pointer to the buffer containing the text string if the conversion succeeds, and NULL otherwise. Upon failure, errno is set to [EAFNOSUPPORT] if the af argument is invalid, or [ENOSPC] if the size of the result buffer is inadequate. IPv6 Address Notation The IPv6 address is 128 bytes long.
inet6(3N) inet6(3N) or ::FFFF:102:305 AUTHOR These inet routines were developed by the University of California, Berkeley. SEE ALSO gethostent(3N), getnetent(3N), inet(3N), hosts(4), networks(4).
inet6_opt_init(3N) inet6_opt_init(3N) NAME inet6_opt_init(), inet6_opt_append(), inet6_opt_find(), inet6_opt_finish(), inet6_opt_get_val(), inet6_opt_next(), inet6_opt_set_val() - IPv6 Hop-by-Hop and Destination options manipulation functions. SYNOPSIS #include
inet6_opt_init(3N) inet6_opt_init(3N) inserts any needed pad option, initializes the option (sets the type and length fields), and returns a pointer to the location for the option content in databufp . If the option specified by the type does not fit in the extension header buffer then the function returns -1. The third parameter prevlen should be the length returned by inet6_opt_init() or by a previous inet6_opt_append().
inet6_opt_init(3N) inet6_opt_init(3N) extracting option content with multiple fields. The first parameter databuf should be a pointer returned by inet6_opt_next() or inet6_opt_find() containing the data portion of the option. offset parameter specifies from where in the data portion of the option the value should be extracted. The first byte after the option type and length is accessed by specifying an offset of zero. val points to the destination for the extracted data.
inet6_rth_space(3N) inet6_rth_space(3N) NAME inet6_rth_add(), inet6_rth_getaddr(), inet6_rth_init(), inet6_rth_reverse(), inet6_rth_space() - IPv6 Routing header options manipulation functions. inet6_rth_segments(), SYNOPSIS #include
inet6_rth_space(3N) inet6_rth_space(3N) If successful, the segleft member of the Routing header is updated to account for the new address in the Routing header and the return value of the function is 0. Upon an error the return value of the function is -1. inet6_rth_reverse() This function takes a Routing header extension header pointed to by the first argument in and writes a new Routing header. The new Routing header sends datagrams along the reverse of that route.
initgroups(3C) initgroups(3C) NAME initgroups( ) - initialize group access list SYNOPSIS #include int initgroups(const char *name, gid_t basegid); DESCRIPTION initgroups() reads the login group file, /etc/logingroup, and sets up the group access list for the user specified by name, using the setgroups (2) system call. If the value of basegid is zero or positive, it is automatically included in the groups list. Typically this value is given as the group number from the password file.
initscr(3X) initscr(3X) (CURSES) NAME initscr, newterm — screen initialisation functions SYNOPSIS #include WINDOW *initscr(void); SCREEN *newterm(char *type, FILE *outfile, FILE *infile); DESCRIPTION The initscr() function determines the terminal type and initialises all implementation data structures. The TERM environment variable specifies the terminal type. The initscr() function also causes the first refresh operation to clear the screen.
innstr(3X) innstr(3X) (ENHANCED CURSES) NAME innstr, instr, mvinnstr, mvinstr, mvwinnstr, mvwinstr, winnstr, winstr — input a multi-byte character string from a window SYNOPSIS #include
innwstr(3X) innwstr(3X) (ENHANCED CURSES) NAME innwstr, inwstr, mvinnwstr, mvinwstr, mvwinnwstr, mvwinwstr, winnwstr, winwstr — input a string of wide characters from a window SYNOPSIS #include
insch(3X) insch(3X) (CURSES) NAME insch, mvinsch, mvwinsch, winsch — insert a single-byte character and rendition into a window SYNOPSIS #include int insch(chtype ch); int mvinsch(int y, int x, chtype ch); int mvwinsch(WINDOW *win, int y, int x, chtype ch); int winsch(WINDOW *win, chtype ch); DESCRIPTION These functions insert the character and rendition from ch into the current or specified window at the current or specified position. These functions do not perform wrapping.
insdelln(3X) insdelln(3X) (ENHANCED CURSES) NAME insdelln, winsdelln — delete or insert lines into a window SYNOPSIS #include int insdelln(int n); int winsdelln(WINDOW *win, int n); DESCRIPTION The insdelln() and winsdelln() functions perform the following actions: • If n is positive, these functions insert n lines into the current or specified window before the current line. The n last lines are no longer displayed.
insertln(3X) insertln(3X) (CURSES) NAME insertln, winsertln — insert lines into a window SYNOPSIS #include int insertln(void); int winsertln(WINDOW *win); DESCRIPTION The insertln() and winsertln() functions insert a blank line before the current line in the current or specified window. The bottom line is no longer displayed. The cursor position does not change. RETURN VALUE Upon successful completion, these functions return OK. Otherwise, they return ERR. ERRORS No errors are defined.
insnstr(3X) insnstr(3X) (ENHANCED CURSES) NAME insnstr, insstr, mvinsnstr, mvinsstr, mvwinsnstr, mvwinsstr, winsnstr, winsstr — insert a multi-byte character string into a window SYNOPSIS #include
insque(3C) insque(3C) NAME insque(), remque() - insert or remove an element in a queue SYNOPSIS #include void insque(void *element, void *pred); void remque(void *element); DESCRIPTION The insque() and remque() functions manipulate queues built from doubly-linked lists. An application using these functions must define a structure in which the first two members of the structure are pointers to the same type of structure. Any additional members of the structure are application specific.
ins_nwstr(3X) ins_nwstr(3X) (ENHANCED CURSES) NAME ins_nwstr, ins_wstr, mvins_nwstr, mvins_wstr, mvwins_nwstr, mvwins_wstr, wins_nwstr, wins_wstr — insert a wide-character string into a window SYNOPSIS #include
ins_wch(3X) ins_wch(3X) (ENHANCED CURSES) NAME ins_wch, mvins_wch, mvwins_wch, wins_wch — insert a complex character and rendition into a window SYNOPSIS #include
intrflush(3X) intrflush(3X) (CURSES) NAME intrflush — enable or disable flush on interrupt SYNOPSIS #include int intrflush(WINDOW *win, bool bf); DESCRIPTION The intrflush() function specifies whether pressing an interrupt key (interrupt, suspend or quit) will flush the input buffer associated with the current screen. If bf is TRUE, pressing an interrupt key will flush this input buffer. If bf is FALSE, pressing an interrupt key will not flush this input buffer.
in_wch(3X) in_wch(3X) (ENHANCED CURSES) NAME in_wch, mvin_wch, mvwin_wch, win_wch — input a complex character and rendition from a window SYNOPSIS #include
in_wchnstr(3X) in_wchnstr(3X) (ENHANCED CURSES) NAME in_wchnstr, in_wchstr, mvin_wchnstr, mvin_wchstr, mvwin_wchnstr, mvwin_wchstr, win_wchnstr, win_wchstr — input an array of complex characters and renditions from a window SYNOPSIS #include
isastream(3C) isastream(3C) NAME isastream( ) - determine if a file descriptor refers to a STREAMS device or STREAMS-based pipe SYNOPSIS #include int isastream(int fd); DESCRIPTION The isastream() function tests whether an open file descriptor (fd) corresponds to a STREAMS device or STREAMS-based pipe.
isendwin(3X) isendwin(3X) (ENHANCED CURSES) NAME isendwin — determine whether a screen has been refreshed SYNOPSIS #include bool isendwin(void); DESCRIPTION The isendwin() function indicates whether the screen has been refreshed since the last call to endwin(). RETURN VALUE The isendwin() function returns TRUE if endwin() has been called without any subsequent refresh. Otherwise, it returns FALSE. ERRORS No errors are defined. SEE ALSO endwin(3X), .
isfinite(3M) isfinite(3M) NAME isfinite( ) - floating-point finiteness macro SYNOPSIS #include int isfinite(floating-type x); DESCRIPTION The isfinite() macro determines whether its argument has a finite value (zero, denormalized, or normalized, and not infinite or NaN). The argument must be of floating type, and classification is based on the type of the argument. For Itanium(R)-based systems, the argument can be any floating type. For PA-RISC, the argument must be either double or float.
isgreater(3M) isgreater(3M) NAME isgreater( ) - floating-point quiet comparison macro (>) SYNOPSIS #include int isgreater(floating-expr x, floating-expr y); DESCRIPTION The isgreater() macro determines whether its first argument is greater than its second argument. The value of isgreater(x ,y ) is always equal to (x ) > (y ); however, unlike (x ) > (y ), isgreater(x ,y ) does not raise the invalid exception when x and y are unordered. The arguments must be of floating type.
isgreaterequal(3M) isgreaterequal(3M) NAME isgreaterequal( ) - floating-point quiet comparison macro (>=) SYNOPSIS #include int isgreaterequal(floating-expr x, floating-expr y); DESCRIPTION The isgreaterequal() macro determines whether its first argument is greater than or equal to its second argument. The value of isgreaterequal(x ,y ) is always equal to (x ) >= (y ); however, unlike (x ) >= (y ), isgreaterequal(x ,y ) does not raise the invalid exception when x and y are unordered.
isinf(3M) isinf(3M) NAME isinf( ) - floating-point test for infinity SYNOPSIS #include int isinf(floating-type x); DESCRIPTION The isinf() macro determines whether its argument is an infinity. The argument must be of floating type, and classification is based on the type of the argument. For Itanium(R)-based systems, the argument can be any floating type. For PA-RISC, the argument must be either double or float.
isless(3M) isless(3M) NAME isless( ) - floating-point quiet comparison macro (<) SYNOPSIS #include int isless(floating-expr x, floating-expr y); DESCRIPTION The isless() macro determines whether its first argument is less than its second argument. The value of isless(x ,y ) is always equal to (x ) < (y ); however, unlike (x ) isless(x ,y ) does not raise the invalid exception when x and y are unordered. < (y ), The arguments must be of floating type.
islessequal(3M) islessequal(3M) NAME islessequal( ) - floating-point quiet comparison macro (<=) SYNOPSIS #include int islessequal(floating-expr x, floating-expr y); DESCRIPTION The islessequal() macro determines whether its first argument is less than or equal to its second argument. The value of islessequal(x ,y ) is always equal to (x ) <= (y ); however, unlike (x ) <= (y ), islessequal(x ,y ) does not raise the invalid exception when x and y are unordered.
islessgreater(3M) islessgreater(3M) NAME islessgreater( ) - floating-point quiet comparison macro (<>) SYNOPSIS #include int islessgreater(floating-expr x, floating-expr y); DESCRIPTION The islessgreater() macro determines whether its first argument is less than or greater than its second argument, without raising the invalid exception when x and y are unordered. The arguments must be of floating type. For Itanium(R)-based systems, the arguments can be any floating type.
isnan(3M) isnan(3M) NAME isnan( ) - floating-point test for NaN SYNOPSIS #include int isnan(floating-type x); DESCRIPTION The isnan() macro determines whether its argument is a NaN. The argument must be of floating type. For Itanium(R)-based systems, the argument can be any floating type. For PA-RISC, the argument must be either double or float. The isnan() macro implements the isnan() functionality recommended by the IEEE-754 standard for floating-point arithmetic.
isnormal(3M) isnormal(3M) NAME isnormal( ) - floating-point test for normalized value SYNOPSIS #include int isnormal(floating-type x); DESCRIPTION The isnormal() macro determines whether its argument is a normalized value (neither zero, denormalized, infinite, nor NaN). The argument must be of floating type, and classification is based on the type of the argument. For Itanium(R)-based systems, the argument can be any floating type. For PARISC, the argument must be either double or float.
isunordered(3M) isunordered(3M) NAME isunordered( ) - floating-point comparison macro (unordered) SYNOPSIS #include int isunordered(floating-expr x, floating-expr y); DESCRIPTION The isunordered() macro determines whether its arguments are unordered. The arguments are unordered if at least one argument is a NaN. The arguments must be of floating type. For Itanium(R)-based systems, the arguments can be any floating type. For PA-RISC, each argument must be either double or float.
is_linetouched(3X) is_linetouched(3X) (ENHANCED CURSES) NAME is_linetouched, is_wintouched, touchline, untouchwin, wtouchln — window refresh control functions SYNOPSIS #include bool is_linetouched(WINDOW *win, int line); bool is_wintouched(WINDOW *win); int touchline(WINDOW *win, int start, int count); int untouchwin(WINDOW *win); int wtouchln(WINDOW *win, int y, int n, int changed); DESCRIPTION The touchline() function only touches count lines, beginning with line start.
j0(3M) j0(3M) NAME j0( ), j1( ), jn( ) - Bessel functions of the first kind SYNOPSIS #include double j0(double x); double j1(double x); double jn(int n, double x); DESCRIPTION j0() and j1() return Bessel functions of x of the first kind of orders 0 and 1 respectively. jn() returns the Bessel function of x of the first kind of order n. USAGE To use these functions, compile either with the default -Ae option or with the -Aa and -D_HPUX_SOURCE options. Make sure your program includes .
keyname(3X) keyname(3X) (ENHANCED CURSES) NAME keyname, key_name — get name of key SYNOPSIS #include char *keyname(int c); char *key_name(wchar_t c); DESCRIPTION The keyname() and key_name() functions generate a character string whose value describes the key c. The c argument of keyname() can be an 8-bit character or a key code. The c argument of key_name() must be a wide character.
keypad(3X) keypad(3X) (CURSES) NAME keypad — enable/disable abbreviation of function keys SYNOPSIS #include int keypad(WINDOW *win, bool bf); DESCRIPTION The keypad() function controls keypad translation. If bf is TRUE, keypad translation is turned on. If bf is FALSE, keypad translation is turned off. The initial state is FALSE. This function affects the behaviour of any function that provides keyboard input.
lckpwdf(3C) lckpwdf(3C) NAME lckpwdf(), ulckpwdf() - control access to the /etc/passwd and /etc/shadow files SYNOPSIS #include int lckpwdf (void) int ulckpwdf (void) DESCRIPTION The lckpwdf() and ulckpwdf() routines are used to coordinate modification access to the password file /etc/passwd and to the shadow password file /etc/shadow. The lock file used by these two routines is /etc/.pwd.lock. A process first calls lckpwdf() to gain exclusive access rights for modification.
ldcvt(3C) ldcvt(3C) NAME _ldecvt( ), _ldfcvt( ), _ldgcvt( ) - convert long-double floating-point number to string SYNOPSIS #include
ldcvt(3C) ldcvt(3C) International Code Set Support Single-byte character code sets are supported. AUTHOR _ldecvt(), _ldfcvt(), and _ldgcvt() were developed by HP. SEE ALSO setlocale(3C), printf(3S), lang(5), thread_safety(5).
ldexp(3M) ldexp(3M) NAME ldexp( ), ldexpf( ), ldexpl( ), ldexpw( ), ldexpq( ) - scale exponent of a floating-point number SYNOPSIS #include double ldexp(double x, int exp); Itanium(R)-based System Only float ldexpf(float x, int exp); long double ldexpl(long double y, int exp); extended ldexpw(extended x, int exp); quad ldexpq(quad x, int exp); DESCRIPTION exp The ldexp() function computes the quantity x * 2 . ldexp() computes the same value as scalbn().
ldexp(3M) ldexp(3M) STANDARDS CONFORMANCE ldexp() : SVID3, XPG4.
lgamma(3M) lgamma(3M) NAME lgamma( ), lgammaf( ), lgammal( ), lgammaw( ), lgammaq( ), lgamma_r( ), lgammaf_r( ), lgammal_r( ), lgammaw_r( ), lgammaq_r( ), gamma( ), gammaf( ), gammal( ), gammaw( ), gammaq( ), signgam - log gamma functions SYNOPSIS #include
lgamma(3M) lgamma(3M) lgammaq(), gammaq(), and lgammaq_r are equivalent to lgammal(), gammal(), and lgammal_r() respectively on HP-UX systems. USAGE To use these functions, compile either with the default -Ae option or with the -Aa and -D_HPUX_SOURCE options. To use (for Itanium-based systems) lgammaw(), lgammaw_r(), gammaw(), lgammaq(), lgammaq_r(), or gammaq(), compile also with the -fpwidetypes option. Make sure your program includes
libkrb5(3) libkrb5(3) NAME libkrb5 - Kerberos client libraries (libkrb5, libk5crypto, libcom_err) SYNOPSIS 32-Bit Itanium(R)-based Libraries /usr/lib/hpux32/libkrb5.so /usr/lib/hpux32/libcom_err.so /usr/lib/hpux32/libk5crypto.so 64-Bit Itanium-based Libraries /usr/lib/hpux64/libkrb5.so /usr/lib/hpux64/libcom_err.so /usr/lib/hpux64/libk5crypto.so 32-Bit PA-RISC Libraries /usr/lib/libkrb5.sl /usr/lib/libcom_err.sl /usr/lib/libk5crypto.sl 64-Bit PA-RISC Libraries /usr/lib/pa20_64/libkrb5.
libkrb5(3) libkrb5(3) krb5_init_context(), krb5_init6_context(), krb5_set_default_in_tkt_etypes(). krb5_free_context(), and The encryption types which are retrieved from the context and stored in the etypes should be freed by the caller. Note: krb5_init6_context() is only available on Itanium-based platform. krb5_auth_context Management APIs The auth_context is a per-connection context and is used by the various APIs involved directly in client/server authentication.
libkrb5(3) libkrb5(3) Operating System-Specific APIs These APIs provide an interface between the other parts of the libkrb5 libraries and the operating system. These include APIs to allow access to configuration specific information, disk based I/O operations, network based operations and operating system specific access APIs.
libslp(3N) libslp(3N) NAME libslp: SLPOpen(), SLPClose(), SLPReg(), SLPDereg(), SLPDelAttrs(), SLPFindSrvs(), SLPFindSrvTypes(), SLPFindAttrs(), SLPParseSrvURL(), SLPEscape(), SLPUnescape(), SLPFree(), SLPGetRefreshInterval(), SLPFindScopes(), SLPGetProperty(), SLPSetProperty() - SLP (Service Location Protocol) library routines SYNOPSIS #include cc [ flag... ] file... -lslp [ library...
libslp(3N) libslp(3N) const char* scopelist, const char* attrids, SLPSrvURLCallback callback, void* cookie ); DESCRIPTION The SLP (Service Location Protocol) library routines provide a standard interface for writing application programs that are SLP enabled. The SLP API is an interface that allows programmers to write client and server applications to provide dynamic service discovery and selection. The C language binding presents a minimal overhead implementation that maps directly into the protocol.
libslp(3N) libslp(3N) callback function as one of the paramaters to the library function, to continue to perform its job, while the result of that operation is being evaluated by the callback function. The callback function is called whenever the API library has results to report. The callback code is required to check the error code parameter before looking at the other parameters. If the error code is not SLP_OK, the other parameters may be NULL or otherwise invalid.
libslp(3N) libslp(3N) If lifetime is set to SLP_LIFETIME_MAXIMUM, it will remain registered for the lifetime of the calling process. The srvtype parameter is always ignored because the Service URL syntax required for the srvurl parameter encapsulates the service-type. Attributes list consists of comma separated attribute assignment expressions for the registered service. If no attributes are to be provided, use an empty string "" when registering services.
libslp(3N) libslp(3N) void* cookie) The SLPSrvURLCallback type is the type of the callback function parameter to SLPFindSrvs() function. If the hslp handle parameter was opened asynchronously, the results returned through the callback MAY be uncollated. The callback should return SLP_TRUE if more data is desired. The callback may continue to return SLP_TRUE until it is called with an errcode of SLP_LAST_CALL. If no more data is requested the callback should return SLP_FALSE.
libslp(3N) libslp(3N) Returns the minimum refresh interval that will be accepted by all SLP SA and DA agents on the network. This call is not implemented and always returns SLP_NOT_IMPLEMENTED. SLPError SLPFindScopes(SLPHandle hslp, char** scopelist) Sets the scopelist parameter to a pointer to a comma separated list of all available scope values. The most desirable values are always placed first in the list. There is always one value, "DEFAULT", in the list.
LINES(3X) LINES(3X) (ENHANCED CURSES) NAME LINES — number of lines on terminal screen SYNOPSIS #include extern int LINES; DESCRIPTION The external variable LINES indicates the number of lines on the terminal screen. SEE ALSO initscr(3X), . CHANGE HISTORY First released in X/Open Curses, Issue 4.
llrint(3M) llrint(3M) NAME llrint( ), llrintf( ), llrintl( ), llrintw( ), llrintq( ) - round to nearest long long functions SYNOPSIS #include long long llrint(double x); Itanium(R)-based System Only long long llrintf(float x); long long llrintl(long double x); long long llrintw(extended x); long long llrintq(quad x); DESCRIPTION llrint() rounds its argument to the nearest integral value, rounding according to the current rounding direction.
llround(3M) llround(3M) NAME llround( ), llroundf( ), llroundl( ), llroundw( ), llroundq( ) - round to long long functions SYNOPSIS #include long long llround(double x); Itanium(R)-based System Only long long llroundf(float x); long long llroundl(long double x); long long llroundw(extended x); long long llroundq(quad x); DESCRIPTION llround() rounds its argument to the nearest integral value.
localeconv(3C) localeconv(3C) NAME localeconv() - query the numeric formatting conventions of the current locale SYNOPSIS #include struct lconv *localeconv(void); DESCRIPTION The localeconv() function sets the components of an object of type struct lconv (defined in ) with values appropriate for the formatting of numeric quantities (monetary and otherwise) according to the rules of the program’s current locale (see setlocale (3C)).
localeconv(3C) localeconv(3C) char p_cs_precedes Set to 1 or 0 if the currency_symbol or int_curr_symbol respectively precedes or succeeds the value for a nonnegative formatted monetary quantity. char p_sep_by_space Set to 1 or 0 if the currency_symbol or int_curr_symbol respectively is or is not separated by a space from the value for a nonnegative formatted monetary quantity; and set to 2 if a space separates the symbol and the sign string, if adjacent.
localeconv(3C) localeconv(3C) RETURN VALUE localeconv() returns a pointer to the filled-in struct lconv. EXAMPLES The following table illustrates the formatting used in five languages for monetary quantities. Country en_US.iso88591 it_IT.iso88591 nl_NL.iso88591 no_NO.iso88591 pt_PT.iso88591 Positive format $1,234.56 L.1.234 F 1.234,56 kr1.234,56 1,234$56 Negative format -$1,234.56 -L.1.234 F -1.234,56 kr1.234,56-1,234$56 International format USD 1,234.56 ITL.1.234 NLG 1.234,56 NOK 1.
log(3M) log(3M) NAME log( ), logf( ), logl( ), logw( ), logq( ) - natural logarithm functions SYNOPSIS #include double log(double x); float logf(float x); Itanium(R)-based System Only long double logl(long double x); extended logw(extended x); quad logq(quad x); DESCRIPTION log() returns the natural logarithm of x. logf() is a float version of log(); it takes a float argument and returns a float result.
log(3M) log(3M) STANDARDS CONFORMANCE log() : SVID3, XPG4.
log10(3M) log10(3M) NAME log10( ), log10f( ), log10l( ), log10w( ), log10q( ) - common logarithm functions SYNOPSIS #include double log10(double x); float log10f(float x); Itanium(R)-based System Only long double log10l(long double x); extended log10w(extended x); quad log10q(quad x); DESCRIPTION log10() returns the logarithm base ten of x. log10f() is a float version of log10(); it takes a float argument and returns a float result.
log10(3M) log10(3M) SEE ALSO exp(3M), exp10(3M), log(3M), log1p(3M), log2(3M), pow(3M), math(5). STANDARDS CONFORMANCE log10() : SVID3, XPG4.
log1p(3M) log1p(3M) NAME log1p( ), log1pf( ), log1pl( ), log1pw( ), log1pq( ) - natural logarithm of one-plus-argument functions SYNOPSIS #include double log1p(double x); Itanium(R)-based System Only float log1pf(float x); long double log1pl(long double x); extended log1pw(extended x); quad log1pq(quad x); DESCRIPTION The log1p() function computes the logarithmic function log(1 + x ), but may be more accurate for very small values of x.
log1p(3M) log1p(3M) STANDARDS CONFORMANCE log1p() : XPG4.
log2(3M) log2(3M) NAME log2( ), log2f( ), log2l( ), log2w( ), log2q( ) - logarithm base two functions SYNOPSIS #include double log2(double x); float log2f(float x); Itanium(R)-based System Only long double log2l(long double x); extended log2w(extended x); quad log2q(quad x); DESCRIPTION log2() returns the logarithm base two of x. log2f() is a float version of log2(); it takes a float argument and returns a float result.
logb(3M) logb(3M) NAME logb( ), logbf( ), logbl( ), logbw( ), logbq( ) - radix-independent exponent functions SYNOPSIS #include double logb(double x); Itanium(R)-based System Only float logbf(float x); long double logbl(long double x); extended logbw(extended x); quad logbq(quad x); DESCRIPTION The logb() function computes the exponent of the floating point value x.
logname(3C) logname(3C) NAME logname( ) - return login name of user SYNOPSIS #include char *logname(void); DESCRIPTION logname() returns a pointer to the null-terminated login name; it extracts the $LOGNAME variable from the user’s environment. WARNINGS logname() returns a pointer to static data that is overwritten by each subsequent call. This method of determining a login name is subject to forgery. FILES /etc/profile SEE ALSO env(1), login(1), profile(4), environ(5), thread_safety(5).
longname(3X) longname(3X) (CURSES) NAME longname — get verbose description of current terminal SYNOPSIS #include char *longname(void); DESCRIPTION The longname() function generates a verbose description of the current terminal. The maximum length of a verbose description is 128 bytes. It is defined only after the call to initscr() or newterm(). RETURN VALUE Upon successful completion, longname() returns a pointer to the description specified above.
lrint(3M) lrint(3M) NAME lrint( ), lrintf( ), lrintl( ), lrintw( ), lrintq( ) - round to nearest long int functions SYNOPSIS #include long int lrint(double x); Itanium(R)-based System Only long int lrintf(float x); long int lrintl(long double x); long int lrintw(extended x); long int lrintq(quad x); DESCRIPTION lrint() rounds its argument to the nearest integral value, rounding according to the current rounding direction.
lround(3M) lround(3M) NAME lround( ), lroundf( ), lroundl( ), lroundw( ), lroundq( ) - round to long int functions SYNOPSIS #include long int lround(double x); Itanium(R)-based System Only long int lroundf(float x); long int lroundl(long double x); long int lroundw(extended x); long int lroundq(quad x); DESCRIPTION lround() rounds its argument to the nearest integral value. An argument exactly halfway between two integers is rounded away from zero, regardless of the current rounding direction.
lsearch(3C) lsearch(3C) NAME lsearch( ), lfind( ) - linear search and update SYNOPSIS #include void *lsearch( const void *key, void *base, size_t *nelp, size_t width, int (*compar)(const void *, const void *) ); void *lfind( const void *key, const void *base, size_t *nelp, size_t width, int (*compar)(const void *, const void *) ); DESCRIPTION lsearch() lfind() is a linear search routine generalized from Knuth (6.1) Algorithm S.
lsearch(3C) lsearch(3C) #include #define TABSIZE 50 #define ELSIZE 120 char line[ELSIZE], tab[TABSIZE][ELSIZE], *lsearch( ); size_t nel = 0; int strcmp( ); ... while (fgets(line, ELSIZE, stdin) != NULL && nel < TABSIZE) (void) lsearch(line, (char *)tab, &nel, ELSIZE, strcmp); ... RETURN VALUE If the searched-for datum is found, both lsearch() and lfind() return a pointer to it. Otherwise, lfind() returns NULL and lsearch() returns a pointer to the newly added element.
ltostr(3C) ltostr(3C) NAME ltostr(), ultostr(), ltoa(), ultoa() - convert long integers to strings SYNOPSIS #include
malloc(3C) malloc(3C) NAME malloc(), free(), realloc(), calloc(), valloc(), mallopt(), mallinfo(), memorymap(), alloca() - main memory allocator SYNOPSIS #include void *malloc(size_t size); void *calloc(size_t nelem, size_t elsize); void *realloc(void *ptr, size_t size); void *valloc(size_t size); void free(void *ptr); void memorymap(int show_stats); (Obsoleted) alloca #include void *alloca(size_t size); SYSTEM V SYNOPSIS #include
malloc(3C) mallopt() malloc(3C) Provides for control over the allocation algorithm and other options in the malloc (3C) package. The available values for cmd are: M_MXFAST Set maxfast to value . The algorithm allocates all blocks below the size of maxfast in large groups, then doles them out very quickly. The default value for maxfast is zero. M_NLBLKS Set numlblks to value . The above mentioned ‘‘large groups’’ each contain numlblks blocks. numlblks must be greater than 1.
malloc(3C) malloc(3C) concerning number of blocks and sizes used will also be written. If the value is zero, only the memory map will be written. The addresses and sizes displayed by memorymap() may not correspond to those requested by an application. The size of a block (as viewed by the allocator) includes header information and padding to properly align the block. The address is also offset by a certain amount to accommodate the header information.
malloc(3C) malloc(3C) _M_SBA_OPTS is used to turn on the small block allocator, and to set up parameters for the small block allocator, namely, maxfast , grain , and numlblks . Applications with small block allocator turned on usually run faster than with it turned off. Small block allocator can be turned on through mallopt(); however, it is not early enough for C++/Java applications. The environment variable turns it on before the application starts. The mallopt() call can still be used the same way.
malloc(3C) malloc(3C) Obsolescent Interfaces memorymap() has been deprecated at HP-UX 11i Version 1 and is now obsolete. The mallinfo() function is more useful for malloc statistics. COMPATIBILITY The only external difference between the old malloc (3X) allocator and the malloc (3C) allocator is that the old allocator would return a NULL pointer for a request of zero bytes. The malloc (3C) allocator returns a valid memory address. This is not a concern for most applications.
mbrlen(3C) mbrlen(3C) NAME mbrlen( ) - get number of bytes in a character (restartable) SYNOPSIS #include size_t mbrlen(const char *s, size_t n, mbstate_t *ps); DESCRIPTION If s is not a null pointer, mbrlen() determines the number of bytes constituting the character pointed to by s.
mbrtowc(3C) mbrtowc(3C) NAME mbrtowc( ) - convert a character to a wide-character code (restartable) SYNOPSIS #include size_t mbrtowc(wchar_t *pwc, const char *s, size_t n, mbstate_t *ps); DESCRIPTION If s is a null pointer, the mbrtowc() function is equivalent to the call: mbrtowc(NULL, "", 1, ps) In this case, the values of the arguments pwc and n are ignored.
mbrtowc(3C) mbrtowc(3C) SEE ALSO mbsinit(3C).
mbsinit(3C) mbsinit(3C) NAME mbsinit( ) - determine conversion object status SYNOPSIS #include int mbsinit(const mbstate_t *ps); DESCRIPTION If ps is not a null pointer, the mbsinit() function determines whether the object pointed to by ps describes an initial conversion state.
mbsrtowcs(3C) mbsrtowcs(3C) NAME mbsrtowcs( ) - convert a character string to a wide-character string (restartable) SYNOPSIS #include size_t mbsrtowcs(wchar_t *dst, const char **src, size_t len, mbstate_t *ps); DESCRIPTION The mbsrtowcs() function converts a sequence of characters, beginning in the conversion state described by the object pointed to by ps , from the array indirectly pointed to by src into a sequence of corresponding wide-characters.
memalign(3C) memalign(3C) NAME memalign() - allocate aligned memory SYNOPSIS #include void *memalign(size_t boundary, size_t size); DESCRIPTION memalign() allocates space for a block of size bytes, whose address is a multiple of boundary . The space is not initialized. The boundary must be a power of 2. RETURN VALUE Upon successful completion, memalign() returns a pointer to space aligned to a multiple of boundary . Otherwise, it returns a NULL pointer.
memory(3C) memory(3C) NAME memccpy( ), memchr( ), memcmp( ), memcpy( ), memmove( ), memset( ), bcopy( ), bcmp( ), bzero( ), ffs( ) memory operations SYNOPSIS #include void *memccpy(void *s1, const void *s2, int c, size_t n); void *memchr(const void *s, int c, size_t n); int memcmp(const void *s1, const void *s2, size_t n); void *memcpy(void *s1, const void *s2, size_t n); void *memmove(void *s1, const void *s2, size_t n); void *memset(void *s, int c, size_t n); #include
memory(3C) memory(3C) bcopy() copies n bytes from the area pointed to by s1 to the area pointed to by s2. bcmp() Compare the first n bytes of the area pointed to by s1 with the area pointed to by s2. bcmp() returns zero if they are identical; non-zero otherwise. Both areas are assumed to be n bytes in length. bzero() Clear n bytes in the area pointed to by s by setting them to zero. ffs() Find the first bit set (beginning with the least significant bit) and return the index of that bit.
meta(3X) meta(3X) (ENHANCED CURSES) NAME meta — enable/disable meta-keys SYNOPSIS #include int meta(WINDOW *win, bool bf); DESCRIPTION Initially, whether the terminal returns 7 or 8 significant bits on input depends on the control mode of the display driver (see the X/Open System Interface Definitions, Issue 4, Version 2 specification, General Terminal Interface ). To force 8 bits to be returned, invoke meta(win, TRUE). To force 7 bits to be returned, invoke meta(win, FALSE).
mkdirp(3G) mkdirp(3G) NAME mkdirp(), rmdirp() - create, remove directories in a path SYNOPSIS #include int mkdirp (const char *path , mode_t mode ); int rmdirp (char *d , char *d1 ); DESCRIPTION mkdirp creates all the missing directories in the given path with the given mode. [See chmod(2) for the values of mode.] The protection part of the mode argument is modified by the process’s file creation mask (see umask(2)). rmdirp removes directories in path d.
mkfifo(3C) mkfifo(3C) NAME mkfifo( ) - make a FIFO file SYNOPSIS #include int mkfifo(char *path, mode_t mode); DESCRIPTION mkfifo() creates a new FIFO (first-in-first-out) file, at the path name to which path points. The file permission bits of the new file are initialized from the mode argument, as modified by the process’s file creation mask: for each bit set in the process’s file mode creation mask, the corresponding bit in the new file’s mode is cleared (see umask(2)).
mkfifo(3C) mkfifo(3C) STANDARDS CONFORMANCE mkfifo(): AES, SVID3, XPG3, XPG4, FIPS 151-2, POSIX.
mktemp(3C) mktemp(3C) NAME mktemp( ), mkstemp( ) - make a unique file name SYNOPSIS #include char *mktemp(char *template); int mkstemp(char *template); Remarks: These functions are provided solely for backward compatibility and importability of applications, and are not recommended for new applications where portability is important. For portable applications, use tmpfile() instead (see tmpfile (3S)).
mktimer(3C) mktimer(3C) NAME mktimer - allocate a per-process timer SYNOPSIS #include timer_t mktimer(int clock_type, int notify_type, void *itimercbp); DESCRIPTION The mktimer() function is used to allocate a per-process timer using the specified system-wide clock as the timing base. mktimer() returns an unique timer ID of type timer_t used to identify the timer in timer requests (see gettimer (3C)).
modf(3M) modf(3M) NAME modf( ), modff( ), modfl( ), modfw( ), modfq( ) - decompose floating-point number SYNOPSIS #include double modf(double x, double *iptr); Itanium(R)-based System Only float modff(float x, float *iptr); long double modfl(long double x, long double *iptr); extended modfw(extended x, extended *iptr); quad modfq(quad x, quad *iptr); DESCRIPTION The modf() function breaks the argument x into integral and fractional parts, each of which has the same sign as the argument.
monitor(3C) monitor(3C) NAME monitor( ) - prepare execution profile SYNOPSIS #include void monitor( void (*lowpc)(), void (*highpc)(), WORD *buffer, int bufsize, int nfunc ); DESCRIPTION An executable program created by cc -p automatically includes calls for monitor() with default parameters; monitor() need not be called explicitly except to gain fine control over profiling. monitor() is an interface to profil(2).
mount(3N) mount(3N) NAME mount - keep track of remotely mounted file systems SYNOPSIS #include
mount(3N) mount(3N) struct fhstatus { int fhs_status; fhandle_t fhs_fh; }; /* * List of exported directories * An export entry with ex_groups * NULL indicates an entry which is exported to the world.
move(3X) move(3X) (CURSES) NAME move, wmove — window cursor location functions SYNOPSIS #include int move(int y, int x); int wmove(WINDOW *win, int y, int x); DESCRIPTION The move() and wmove() functions move the cursor associated with the current or specified window to (y, x) relative to the window’s origin. This function does not move the terminal’s cursor until the next refresh operation. RETURN VALUE Upon successful completion, these functions return OK. Otherwise, they return ERR.
multibyte(3C) multibyte(3C) NAME mblen( ), mbtowc( ), mbstowcs( ), wctomb( ), wcstombs( ) - multibyte characters and strings conversions SYNOPSIS #include
multibyte(3C) multibyte(3C) multibyte character is converted as if by a call to mbtowc(). No more than n elements are modified in the array pointed to by pwcs . If an invalid multibyte character is encountered, mbstowcs() returns (size_t) − 1. Otherwise, mbstowcs() returns the number of array elements modified, not including a terminating zero code, if any. The array is not null- or zero-terminated if the value returned is n.
mvcur(3X) mvcur(3X) (ENHANCED CURSES) NAME mvcur — output cursor movement commands to the terminal SYNOPSIS #include int mvcur(int oldrow, int oldcol, int newrow, int newcol); DESCRIPTION The mvcur() function outputs one or more commands to the terminal that move the terminal’s cursor to (newrow, newcol), an absolute position on the terminal screen. The (oldrow, oldcol) arguments specify the former cursor position.
mvderwin(3X) mvderwin(3X) (ENHANCED CURSES) NAME mvderwin — define window coordinate transformation SYNOPSIS #include int mvderwin(WINDOW *win, int par_y, int par_x); DESCRIPTION The mvderwin() function specifies a mapping of characters. The function identifies a mapped area of the parent of the specified window, whose size is the same as the size of the specified window and whose origin is at (par_y, par_x) of the parent window.
mvprintw(3X) mvprintw(3X) (CURSES) NAME mvprintw, mvwprintw, printw, wprintw — print formatted output in window SYNOPSIS #include int mvprintw(int y, int x, char *fmt, ...); int mvwprintw(WINDOW *win, int y, int x, char *fmt, ...); int printw(char *fmt, ...); int wprintw(WINDOW *win, char *fmt, ...); DESCRIPTION The mvprintw(), mvwprintw(), printw() and wprintw() functions are analogous to printf().
mvscanw(3X) mvscanw(3X) (CURSES) NAME mvscanw, mvwscanw, scanw, wscanw — convert formatted input from a window SYNOPSIS #include int mvscanw(int y, int x, char *fmt, ...); int mvwscanw(WINDOW *win, int y, int x, char *fmt, ...); int scanw(char *fmt, ...); int wscanw(WINDOW *win, char *fmt, ...); DESCRIPTION These functions are similar to scanf().
mvwin(3X) mvwin(3X) (CURSES) NAME mvwin — move window SYNOPSIS #include int mvwin(WINDOW *win, int y, int x); DESCRIPTION The mvwin() function moves the specified window so that its origin is at position (y, x). If the move would cause any portion of the window to extend past any edge of the screen, the function fails and the window is not moved. RETURN VALUE Upon successful completion, mvwin() returns OK. Otherwise, it returns ERR. ERRORS No errors are defined.
