HP-UX Reference (11i v2 03/08) - 1M System Administration Commands N-Z (vol 4)

u
ups_mond(1M) ups_mond(1M)
UPS <tty special file name
> line too noisy; ignoring that UPS.
UPS <
tty special file name> could not enable; loss of power would not be
detectable.
UPS <tty special file name> read failed: <
errno>; Uninterruptible Power Supply
has not been connected correctly; loss of power would not be detect-
able.
UPS <
tty special file name
> write failed: <errno>; ignoring that UPS.
UPS <tty special file name> read of status received ILLEGAL CMD or NOISY
LINE.
UPS <tty special file name> read of status received <
number> bytes of unex-
pected data (octal: <octal returned>): <
string returned>.
UPS <tty special file name> read of status failed: <
errno>.
UPS <tty special file name
> write failed: <errno>.
UPS <tty special file name
> OK; turned-off Failure Alarm.
UPS <
tty special file name> OK; turned-off Inverter Failure Alarm.
UPS <tty special file name> OK; turned-off No Battery Alarm.
UPS <tty special file name> OK; turned-off Battery Charger Fault Alarm.
UPS <tty special file name> OK; turned-off Current Overload Alarm.
UPS <tty special file name> OK; turned-off High Ambient Temperature Alarm.
UPS <tty special file name> OK; turned-off Battery Failure Alarm.
UPS <tty special file name> OK; turned-off High Battery Voltage Alarm.
UPS <tty special file name> OK; turned-off Low Battery Voltage Alarm.
UPS <tty special file name> OK; turned-off High Output Voltage Alarm.
UPS <tty special file name> OK; turned-off Low Output Voltage Alarm.
UPS <tty special file name> OK; turned-off UPS Communication Lost Alarm.
UPS <tty special file name> Inverter Failure requires repair.
UPS <tty special file name> No Battery - ensure UPS battery installed.
UPS <tty special file name> Battery Charger Fault- requires repair.
UPS <tty special file name> Current Overload - either UPS bad or too many
devices connected.
UPS <tty special file name> High Ambient Temperature-reduce area temperature.
UPS <tty special file name> Battery Failure- requires repair.
UPS <tty special file name> High Battery Voltage - requires repair.
UPS <tty special file name> Low Battery Voltage - requires repair.
UPS <tty special file name> Communication Lost - At least one or more com-
ponents of the UPS subsystem has lost communications.
UPS <tty special file name> UNKNOWN status/alarm <hex number> - may require
repair.
write to UPS <tty special file name> of command <cmd string> Failed: <errno>.
read from UPS <tty special file name> after sending command <cmd string> to
it failed; <errno>.
UPS <tty special file name> could not execute command <cmd string >; returned
(octal: <octal returned >): <string returned > - possible bad signal cable.
Messages relating to Timer Controlled Power On and Off:
Timer Controlled On/Off information invalid; ignored.
Section 1M−−822 Hewlett-Packard Company − 3 − HP-UX 11i Version 2: August 2003