HP-UX Reference (11i v2 03/08) - 1M System Administration Commands N-Z (vol 4)

s
snmpd(1M) snmpd(1M)
/sbin/init.d/SnmpMib2 invokes /usr/sbin/mib2agt
/sbin/rc invokes /sbin/rc2.d/s565SnmpHpunix
/sbin/rc2.d/s565SnmpHpunix invokes /sbin/init.d/SnmpHpunix
/sbin/init.d/SnmpHpunix invokes /usr/sbin/hp_unixagt
/sbin/rc invokes /sbin/rc2.d/s565SnmpTrpDst
/sbin/rc2.d/s565SnmpTrpDst invokes /sbin/init.d/SnmpTrpDst
/sbin/init.d/SnmpTrpDst invokes /usr/sbin/trapdestagt
HP-UX 11i Version 1 (with IPv6 depot installed)
/sbin/rc invokes /sbin/rc2.d/S560SnmpMaster
/sbin/rc2.d/S560SnmpMaster invokes /sbin/init.d/SnmpMaster
/sbin/init.d/SnmpMaster invokes /usr/sbin/snmpdm
/usr/sbin/snmpdm reads /etc/SnmpAgent.d/snmpd.conf
/sbin/rc invokes /sbin/rc2.d/s565SnmpMib2
/sbin/rc2.d/s565SnmpMib2 invokes /sbin/init.d/SnmpMib2
/sbin/init.d/SnmpMib2 invokes /usr/sbin/mib2agt
/sbin/rc invokes /sbin/rc2.d/s565SnmpHpunix
/sbin/rc2.d/s565SnmpHpunix invokes /sbin/init.d/SnmpHpunix
/sbin/init.d/SnmpHpunix invokes /usr/sbin/hp_unixagt
/sbin/rc invokes /sbin/rc2.d/s565SnmpIpv6
/sbin/rc2.d/s565SnmpIpv6 invokes /sbin/init.d/SnmpIpv6
/sbin/init.d/SnmpIpv6 invokes /usr/sbin/ipv6agt
/sbin/rc invokes /sbin/rc2.d/s565SnmpTrpDst
/sbin/rc2.d/s565SnmpTrpDst invokes /sbin/init.d/SnmpTrpDst
sbin/init.d/SnmpTrpDst invokes /usr/sbin/trapdestagt
Manual Startup
There are two ways to start the SNMP Agent manually. The first way is to execute
snmpdm and then
start each subAgent. Separate process subAgents are started by invoking the particular subAgent execut-
ables.
The second and simplest way to start the SNMP Agent manually is to execute the
snmpd
startup script
which will invoke the Master Agent and all subAgents who have been installed and designed to operate in
this paradigm. The
snmpd script is layered upon the V.4 startup paradigm and so makes use of the com-
ponent startup scripts in /sbin/init.d and configuration scripts in /etc/rc.config.d
. When
snmpd is invoked it starts /usr/sbin/snmpdm
, passes all its command line arguments to it and then
executes each script (S*) found in
/sbin/SnmpAgtStart.d
.
Objects on which the agent supports
snmpset requests:
•
syscontact
sysName
sysLocation
ifAdminStatus
atPhysAddress
ipRouteNextHop
ipRouteType
ipRouteAge
ipNetToMediaPhysAddress
ipNetToMediaTypesysName
snmpEnableAuthTraps
ipv6Forwarding
ipv6DefaultHopLimit
ipv6IfAdminStatus
ipv6RouteValid
ipv6NetToMediaValid
ipv6TcpConnState
HP-UX 11i Version 2: August 2003 − 5 − Hewlett-Packard Company Section 1M−−773