HP-UX Reference (11i v2 03/08) - 1M System Administration Commands A-M (vol 3)
l
lvmmigrate(1M) lvmmigrate(1M)
lvmmigrate -v -n
Include file system /mnt in the root volume group for migration and exclude file system
/usr/source.
Write configuration information in the boot section of disk
/dev/dsk/c1t0d0
:
lvmmigrate -d /dev/dsk/c1t0d0 -i /mnt -e /usr/source
WARNINGS
Use of the -f option results in overwriting the contents of the boot section. Before using the
-f option be
sure to back up all data on the boot section of the disk specified with the
-d option.
If there is no LIF volume,
lvmmigrate
uses lifinit to create it (see lifinit(1)). If file CUSTOM
already exists in the LIF volume, lvmmigrate
rewrites it.
Caution: All data on disks being used for reinstallation must be backed up to a separate device because
the install process overwrites data on all disks used in the new root volume group.
SEE ALSO
lifinit(1).
Section 1M−−406 Hewlett-Packard Company − 2 − HP-UX 11i Version 2: August 2003