HP-UX Reference (11i v2 03/08) - 1M System Administration Commands A-M (vol 3)

lanadmin(1M) lanadmin(1M)

quit Terminate the

lanadmin program.

reset Reset the local LAN interface card, causing it to execute its self-test. Local access

to the network is interrupted during execution of

reset. You must have

superuser privileges.

specific Display and execute commands from a driver

specific menu.

Arguments

lanadmin recognizes the following Immediate Mode argument.

PPA The Physical Point of Attachment (PPA) number of the LAN interface. This argu-

ment is ignored if none of the

aAbBgmMpRsSxX options are used (Menu Mode).

Any options speciﬁed after PPA are ignored. Appropriate values can be displayed

with the

lanscan command (see lanscan (1M)).

WARNINGS

Changes made to an interface’s station address or mtu with the

lanadmin command will not be

preserved between system reboots. A user must modify the initialization conﬁguration ﬁles for this

feature, either manually editing conﬁguration ﬁles or through the

SAM interface.

AUTHOR

lanadmin was developed by HP.