HP-UX Reference (11i v2 03/08) - 1 User Commands N-Z (vol 2)

p
parstatus(1) parstatus(1)
Note: This command is a Web-Based Enterprise Management (WBEM) Client Application.
The -u option accesses the target partition using a Secure Sockets Layer (SSL) connection. If
errors are reported, check that the conditions described in the DEPENDENCIES section are
satisfied.
-h IPaddress|hostname
This option should only be used in combination with either the
-u or -g option.
IPaddress|hostname specifies the IP address or hostname of the target partition (
-u) or com-
plex (
-g).
-g [passwd]
Allows access to the complex specified by the
-h option. The accessed complex is then con-
sidered the target complex. Access is via the service processor’s LAN port.
The
-h option is required if this option is used.
passwd specifies the IPMI password of the service processor. If this field is omitted, the com-
mand prompts for the password.
If an error is reported when you attempt to connect using this option, check to see that IPMI
LAN access has not been disabled on the remote service processor. Access to the complex via
IPMI over LAN can be enabled or disabled by logging on to the service processor and using the
SA command from the Command Menu.
The
-u and -g options are mutually exclusive.
-w Display the local partition number in a full sentence. If the -u option connects to another par-
tition, that partition number is reported instead. The -M option restricts the display to just
the partition number.
-X Display the complex attributes.
-A Only display the available resources in the complex.
-V Verbose mode. Increase the amount of information displayed. Additional information
displayed with -V includes:
For Cabinet:
* Status of each of the cabinet blower(s)
* Status of each of the I/O fan(s)
* Status of each of the bulk power supply(s)
* Status of each of the backplane power board(s)
For Partition:
* Primary, alternate and secondary boot path settings
* PDC, IODC version numbers
* Memory interleaving / local memory settings
* Cells summary info
* I/O chassis summary info
For Cell:
* Details of each cpu on the cell
* Details of memory on the cell
* Memory interleaving / local memory settings
-M Produce a machine readable/parseable output, or restrict the output of the
-w option to a par-
tition number. The machine readable output will have the columns separated by a single colon
character (
:) and will not have a column header.
-C Show information for all cells in the complex.
-I Show information for all I/O chassis in the complex.
-B Show information for all cabinets in the complex.
-P Show information for all partitions in the complex.
-c cell Show information about the specified cell. The cell id can be specified either in the local
(cabinet# /slot#) or global (cell_ID) format. For example, the cell located in cabinet 0, slot 1 is
locally identified as 0/1 or globally as 1.
HP-UX 11i Version 2: August 2003 − 2 − Hewlett-Packard Company Section 1−−661