HP-UX Reference (11i v2 03/08) - 1 User Commands N-Z (vol 2)

p
parstatus(1) parstatus(1)
NAME
parstatus - display information about a hardware partitionable complex
SYNOPSIS
parstatus
[ -u username:[passwd]
-h IPaddress|hostname
|
-g [passwd] -h IPaddress|hostname ]
parstatus -s
[ -u username:[passwd] -h
IPaddress|hostname
|
-g [passwd] -h IPaddress|hostname ]
parstatus -w
[ -u username:[passwd]
-h IPaddress|hostname]
parstatus -X
[ -u username:[passwd]
-h IPaddress|hostname
|
-g [passwd] -h IPaddress|hostname ]
parstatus -C|-I [-A][
-M]
[
-u username:[passwd]
-h IPaddress|hostname
|
-g [passwd] -h IPaddress|hostname ]
parstatus -B|-P [-M]
[ -u username:[passwd] -h IPaddress|hostname
| -g [passwd] -h IPaddress|hostname ]
parstatus -i I/Ochassis [-i ...] [-M]
[ -u username:[passwd] -h IPaddress|hostname
| -g [passwd] -h IPaddress|hostname ]
parstatus -c cell [-c ...] [-V|-M]
[ -u username:[passwd] -h IPaddress|hostname
| -g [passwd] -h IPaddress|hostname ]
parstatus -b cabinet [-b ...] [-V|-M]
[ -u username:[passwd] -h IPaddress|hostname
| -g [passwd] -h IPaddress|hostname ]
parstatus -p PartitionNumber [
-p ...] [-V|-M]
[
-u username:[passwd] -h IPaddress|hostname
| -g [passwd] -h IPaddress|hostname ]
DESCRIPTION
The
parstatus command displays information about a system complex. If no arguments are supplied,
all major components that are physically present in the local complex are listed. A specific component
(cell, I/O chassis, cabinet, or partition) may be specified in order to restrict the output to information
about that component. Either the -u option or the -g option can be specified to access a remote complex.
Please refer to the HP System Partitions Guide for a description of the partition management terms used
in this man page.
Options and Arguments
parstatus recognizes the following command line options and arguments:
-s Indicates if the command is being executed on a hardware partitionable platform. When this
option is specified, the command will either succeed or fail (see RETURN VALUE below) and
nothing will be displayed on stdout or stderr.
-u username:[passwd]
Specifies the required authorization to access a partition other than the local partition (but can
also be used as a loopback access to the local partition). If complex attributes are displayed,
the complex is the one in which this target partition resides.
The
-h option is required if this option is used.
username specifies a configured user name on the target partition.
passwd specifies the password associated with the username. If this field is empty, the com-
mand prompts for the password.
Section 1−−660 Hewlett-Packard Company − 1 − HP-UX 11i Version 2: August 2003