HP-UX Reference (11i v1 05/09) - 7 Device (Special) Files, 9 General Information, Index (vol 10)

t
termio(7) termio(7)
Bit Value
m
3
TI/ALP
m
2
0 = Simple protocol (U.S.),
1=CCITT protocol (Europe)
m
1
m
0
00 = Direct
01 = Dial-out modem
10 = Dial-in modem
11 = Invalid
AUTHOR
termios was developed HP and the IEEE Computer Society.
termio was developed by HP, AT&T,
and the University of California, Berkeley.
FILES
/dev/console
/dev/cua
/dev/cul
/dev/tty
/dev/ttyd
EISA mux has adopted the following device files naming convention:
/dev/<cua|cul|tty|ttyd><
Instance_Number><Port_Module_Name
><Port_Number>
where Port_Module_Name = [a..h], Port_Number =1-16
For example:
/dev/cua2a1 , /dev/cul2b8 , /dev/tty2g12 , /dev/ttyd2h16
SEE ALSO
adb(1), shl(1), stty(1), config(1M), dmesg(1M), mknod(1M), fork(2), ioctl(2), setsid(2), signal(2), stty(2),
setpgid(2), blmode(3C), cfspeed(3C), tccontrol(3C), tcattribute(3C), tcgetpgrp(3C), tcsetpgrp(3C),
tcgetsid(3C), signal(5), unistd(5), sttyV6(7), tty(7), modem(7), termiox(7).
STANDARDS CONFORMANCE
termio: SVID2, SVID3, XPG2
termios: AES, SVID3, XPG3, XPG4, FIPS 151-2, POSIX.1
HP-UX 11i Version 1: September 2005 21 Hewlett-Packard Company Section 7195