HP-UX Reference (11i v1 05/09) - 7 Device (Special) Files, 9 General Information, Index (vol 10)

ManualsBrandsHP ManualsSoftwareHP-UX Reference Manuals

181

182

183

184

185

186

187

188

189

190

sttyv6(7) sttyv6(7)

XTABS (if set) sets the termio

TAB3 ﬂag;

XTABS (if clear) clears the termio

TAB3 ﬂag;

TBDELAY (if set) sets the termio

TAB1 ﬂag;

TBDELAY (if clear) clears the termio

TAB1 ﬂag;

LCASE (if set) sets the termio IUCLC, OLCUC,

and XCASE ﬂags;

LCASE (if clear) clears the termio IUCLC, OLCUC,

and XCASE ﬂags;

ECHO (if set) sets the termio ECHO ﬂag;

ECHO (if clear) clears the termio ECHO

ﬂag;

NOAL (if set) sets the termio ECHOK

ﬂag;

NOAL (if clear) clears the termio ECHOK

ﬂag;

CRMOD (if set) sets the termio ICRNL

and ONLCR ﬂags; also, if CR1 is set, the termio CR1 ﬂag is

set, and if

CR2 is set, the termio

ONOCR and CR2 ﬂags are set;

CRMOD (if clear) sets the termio ONLRET ﬂag; also, if

NL1 is set, the termio CR1 ﬂag is set, and if

NL2 is set, the termio CR2 ﬂag is set;

RAW (if set) sets the termio

CS8 ﬂag, and clears the termio ICRNL and IUCLC ﬂags; also, default

values of 6 characters and 0.1 seconds are assigned to MIN and TIME, respectively;

RAW (if clear) sets the termio

BRKINT, IGNPAR, ISTRIP, IXON, IXANY, OPOST, CS7, PARENB,

ICANON,

and ISIG ﬂags; also, the default values control-D and null are assigned to the con-

trol characters EOF and EOL, respectively;

ODDP (if set) if EVENP is also set, clears the termio INPCK ﬂag; otherwise, sets the termio

PARODD ﬂag;

VTDELAY (if set) sets the termio FFDLY

ﬂag;

VTDELAY (if clear) clears the termio FFDLY

ﬂag;

BSDELAY (if set) sets the termio BSDLY

ﬂag;

BSDELAY (if clear) clears the termio BSDLY

ﬂag.

In addition, the termio

CREAD bit is set, and, if the baud rate is 110, the

CSTOPB bit is set.

When using

TIOCSETP, the ispeed entry in the sgttyb structure is mapped into the appropriate speed in

the termio CBAUD ﬁeld. The erase and kill sgttyb entries are mapped into the termio erase and kill char-

acters.

When the gtty(2) (ioctl

TIOCGETP) command is executed, the termio(7) TCGETA

command is ﬁrst executed.

The resulting termio structure is then mapped into the sgttyb structure, which is then returned to the

user.

The following table shows how the termio ﬂags are mapped into the old sgttyb structure. Note that all

ﬂags contained in the sgttyb structure that are not mentioned below are cleared.

HUPCL (if set) sets the sgttyb HUPCL ﬂag;

HUPCL (if clear) clears the sgttyb HUPCL ﬂag;

ICANON (if set) sets the sgttyb RAW ﬂag;

ICANON (if clear) clears the sgttyb RAW ﬂag;

XCASE (if set) sets the sgttyb LCASE ﬂag;

XCASE (if clear) clears the sgttyb LCASE ﬂag;

ECHO (if set) sets the sgttyb ECHO ﬂag;

ECHO (if clear) clears the sgttyb ECHO ﬂag;

ECHOK (if set) sets the sgttyb NOAL ﬂag;

ECHOK (if clear) clears the sgttyb NOAL ﬂag;

PARODD (if set) sets the sgttyb ODDP ﬂag;

PARODD (if clear) clears the sgttyb ODDP ﬂag;

INPCK (if set) sets the sgttyb EVENP ﬂag;

PARODD, INPCK (if both clear) sets the sgttyb ODDP and EVENP ﬂags;

ONLCR (if set) sets the sgttyb CRMOD ﬂag; also, if CR1 is set, the sgttyb CR1 ﬂag is set, and if CR2

is set, the sgttyb CR2 ﬂag is set;

ONLCR (if clear) if CR1 is set, the sgttyb NL1 ﬂag is set, and if CR2 is set, the sgttyb NL2 ﬂag is set;

TAB3 (if set) sets the sgttyb XTABS ﬂag;

TAB3 (if clear) clears the sgttyb XTABS ﬂag;

TAB1 (if set) sets the sgttyb TBDELAY ﬂag;

TAB1 (if clear) clears the sgttyb TBDELAY ﬂag;

FFDLY (if set) sets the sgttyb VTDELAY ﬂag;

FFDLY (if clear) clears the sgttyb VTDELAY ﬂag;

BSDLY (if set) sets the sgttyb BSDELAY ﬂag;

BSDLY (if clear) clears the sgttyb BSDELAY ﬂag.

HP-UX 11i Version 1: September 2005 − 2 − Hewlett-Packard Company Section 7−−169