HP-UX Reference (11i v1 05/09) - 5 Miscellaneous Topics (vol 9)

p
pd_att_queue(5) pd_att_queue(5)
(TO BE OBSOLETED)
|------------|-----------------------------------------------------------|
| Values | [HH:]MM. Unit is minutes. |
|------------|-----------------------------------------------------------|
| Syntax | backlog-lower-bound=[HH:]MM. |
|| |
| | Can be just minutes or hours and minutes. |
|| |
| | For example: -x "backlog-lower-bound=5" |
||or |
| | -x "backlog-lower-bound=1:10" |
|------------|-----------------------------------------------------------|
| Default | No default. |
|------------|-----------------------------------------------------------|
| Usage | o The value for this attribute must be less than or |
| Guidelines | equal to the value specified for the |
| | backlog-upper-bound attribute. |
| | o The value for the attribute backlogged is reset to |
| | false when the value for the queue-backlog attribute |
| | becomes less than this value if backlog computing is |
| | enabled (backlog-update-interval value not equal to |
| | 0). |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | backlog-update-interval |
|------------|-----------------------------------------------------------|
| Type | Settable with the pdcreate or pdset commands. |
|------------|-----------------------------------------------------------|
| Explanation| Specifies how often the queue backlog is computed. |
|------------|-----------------------------------------------------------|
| Value Type | Single value. |
|------------|-----------------------------------------------------------|
| Values | [HH:]MM. Unit is minutes. |
|| |
| | If set to 0, backlog computing is disabled. |
|------------|-----------------------------------------------------------|
| Default | The greater value of the following: |
|| |
| | 1 minute |
| | or |
| | The value of the backlog-upper-bound attribute |
| | divided by 30. |
|------------|-----------------------------------------------------------|
| Usage | o The value for this attribute must be less than or |
| Guidelines | equal to the value specified for the |
| | backlog-upper-bound attribute. |
| | o This default value is set when the queue is created. |
| | If the value for the backlog-upper-bound attribute is |
| | changed later with the pdset, the value for this |
| | attribute is not changed. |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | backlog-upper-bound |
|------------|-----------------------------------------------------------|
| Type | Settable with the pdcreate or pdset commands. |
|------------|-----------------------------------------------------------|
| Explanation| Identifies the limit (time to print the jobs in the |
| | queue) above which the queue is considered backlogged. |
|------------|-----------------------------------------------------------|
HP-UX 11i Version 1: September 2005 − 2 − Hewlett-Packard Company Section 5−−243