HP-UX Reference (11i v1 05/09) - 5 Miscellaneous Topics (vol 9)
p
pd_att_phy_ptr(5) pd_att_phy_ptr(5)
(TO BE OBSOLETED)
| Usage | o The document attribute page-select is compared to |
| Guidelines | this attribute for validation. |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | plexes-supported |
|------------|-----------------------------------------------------------|
| Type | Settable with the pdcreate or pdset commands, or by the |
| | printer attribute file. |
|------------|-----------------------------------------------------------|
| Usage | Values vary by printer model. |
|------------|-----------------------------------------------------------|
| Explanation| Identifies the plexes supported by this printer. Plex |
| | indicates whether the page images of the output document |
| | are conditioned for eventual one-sided or two-sided |
| | printing, and the relative orientation of consecutive |
| | pages. |
|------------|-----------------------------------------------------------|
| Value Type | Multiple values. |
|------------|-----------------------------------------------------------|
| Values | Any of the following fixed values: |
|| |
| | simplex (single sided) |
| | duplex (double sided) |
| | tumble (double sided, every other page upside-down) |
|------------|-----------------------------------------------------------|
| Default | No default. |
|------------|-----------------------------------------------------------|
| Usage | o The document attribute plex is compared to this |
| Guidelines | attribute for scheduling. |
| | o HPDPS defaults "sides=2" when plex=duplex. HPDPS does|
| | not currently perform any other conditioning when |
| | plex=duplex. |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | printer-community-name |
|------------|-----------------------------------------------------------|
| Type | Settable with the pdcreate or pdset commands. |
|------------|-----------------------------------------------------------|
| Usage | Values vary by printer model. |
|------------|-----------------------------------------------------------|
| Explanation| Identifies the password used for SNMP communication with |
| | the printer whose attachment-type is tcpip. |
|------------|-----------------------------------------------------------|
| Value Type | Single value. |
|------------|-----------------------------------------------------------|
| Values | A text string up to 255 that contains the physical |
| | printer’s community name. |
|------------|-----------------------------------------------------------|
| Default | internal |
|------------|-----------------------------------------------------------|
| Usage | o May be set with the pdcreate command at the time of |
| Guidelines | physical printer creation if the attachment-type is |
| | tcpip. Ignored for other attachment-types. |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | printer-mopy-ready |
Section 5−−232 Hewlett-Packard Company − 25 − HP-UX 11i Version 1: September 2005