HP-UX Reference (11i v1 05/09) - 5 Miscellaneous Topics (vol 9)
p
pd_att_phy_ptr(5) pd_att_phy_ptr(5)
(TO BE OBSOLETED)
| Type | Settable attribute which job-batch values |
| | are acceptable to this physical printer. |
|------------|-----------------------------------------------------------|
| Value Type | Multiple values. |
|------------|-----------------------------------------------------------|
| Values | A text string up to 4095 characters in length, |
| | per value, that contains the job-batch name. |
|------------|-----------------------------------------------------------|
| Default | No default. |
|------------|-----------------------------------------------------------|
| Usage | The value of the job attribute job-batch is compared with|
| Guidelines | this attribute during job-scheduling |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | job-finishings-ready |
|------------|-----------------------------------------------------------|
| Type | Settable |
|------------|-----------------------------------------------------------|
| Explanation| Indicates the finishing methods available on this printer.|
|------------|-----------------------------------------------------------|
| Value Type | Single value. |
|------------|-----------------------------------------------------------|
| Values | staple |
| | top-left-staple |
|------------|-----------------------------------------------------------|
| Default | No default. |
|------------|-----------------------------------------------------------|
| Usage | The value of this attribute must be supported by |
| Guidelines | job attribute finishings-supported |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | job-finishings-supported |
|------------|-----------------------------------------------------------|
| Type | Settable |
|------------|-----------------------------------------------------------|
| Explanation| Indicates the finishing method supported by this printer. |
|------------|-----------------------------------------------------------|
| Value Type | Single value. |
|------------|-----------------------------------------------------------|
| Values | staple |
| | top-left-staple |
|------------|-----------------------------------------------------------|
| Default | No default. |
|------------|-----------------------------------------------------------|
| Usage | To verify if a printer is capable of performing a |
| Guidelines | finishing process on a print job. |
|------------|-----------------------------------------------------------|
|------------|-----------------------------------------------------------|
| Attribute | Description |
|------------|-----------------------------------------------------------|
| Name | job-sheets-supported |
|------------|-----------------------------------------------------------|
| Type | Settable with the pdcreate or pdset commands, or by the |
| | printer attribute file. |
|------------|-----------------------------------------------------------|
| Usage | Values vary by printer model. |
|------------|-----------------------------------------------------------|
| Explanation| Identifies the auxiliary sheets supported by this printer.|
Section 5−−220 Hewlett-Packard Company − 13 − HP-UX 11i Version 1: September 2005