HP-UX Reference (11i v1 05/09) - 4 File Formats (vol 8)

arraytab(4) arraytab(4)

For conﬁgurations using logical partitions exceeding 2 GB it is necessary that the 2 GB governor ﬂag be

turned off in the array controller. See see(1M).

DEPENDENCIES:

Series 700:

LUN address 6 and 7 are reserved for use with array management utilities, and should not be conﬁgured.

Series 800:

LUN address 6 and 7 are reserved for use with array management utilities, and should not be conﬁgured.

Only RAID levels 0 (Independent), 3, and 5 are supported.

RAID 0 conﬁgurations must span only a single disk (Independent mode) and result in separate addressable

logical partitions, one for each physical disk.

RAID 3 and RAID 5 conﬁgurations must result in a single logical partition, which span all disks on the

array.

AUTHOR:

arraytab was developed by HP.

FILES

/etc/hpC2400/arraytab