HP-UX Reference (11i v1 05/09) - 4 File Formats (vol 8)

ppp.Dialers(4) ppp.Dialers(4)

\ddd Send or receive a character, speciﬁed in octal digits.

\p Pause for .25 second before proceeding (send only).

\d Delay for two seconds before proceeding (send only).

\K Send a break (.25 second of zero bits).

\M Disable hangups (sets CLOCAL or LNOHANG).

\m enable hangups (unsets CLOCAL or LNOHANG) (the default).

\c Don’t append a carriage return character after sending the preceding string (send only).

\q Don’t print succeeding send strings (e.g. a password) in any debugging or logging output.

Subsequent \q sequences toggle ‘quiet’ mode.

\T Insert the telephone number (found in the ﬁfth ﬁeld of

Systems) here.

EXAMPLE

# Dialers - PPP dialers file

#Dialer Chat script

T1600 ABORT NO\sCARRIER ABORT NO\sDIALTONE ABORT BUSY \

ABORT RRING\r\n\r\nRRING\r\n\r\nRRING \

ABORT ERROR TIMEOUT 5 "" AT OK-AT-OK \

ATS111=0DT\T TIMEOUT 30 CONNECT

T2500-PEP \

ABORT NO\sCARRIER ABORT NO\sDIALTONE ABORT BUSY \

ABORT RRING\r\n\r\nRRING\r\n\r\nRRING \

ABORT ERROR TIMEOUT 5 "" AT OK-AT-OK \

ATS111=0DT\T TIMEOUT 30 CONNECT\sFAST

USRv32bis \

ABORT ERROR ABORT NO\sANSWER ABORT NO\sCARRIER \

ABORT BUSY ABORT RRING\r\n\r\nRRING\r\n\r\nRRING \

ABORT NO\sDIAL\sTONE TIMEOUT 5 "" AT&F \

OK-ATQ0-OK ATB0E0X7&B1&H1&I0&K3&R2&S1 OK-AT-OK \

ATS01=1S02=255S19=0 OK-AT-OK ATDT\T TIMEOUT 30 \

CONNECT

AUTHOR

ppp.Dialers was developed by the Progressive Systems.