HP-UX Reference (11i v1 05/09) - 1M System Administration Commands N-Z (vol 4)

telnetd(1M) telnetd(1M)

the login process or its descendents are passed through as ordinary data.

The following diagnostic messages are displayed by telnetd

unable to allocate Telnet device

The server was unable to obtain a Telnet pseudo-terminal for use with the login process. Either

all Telnet pseudo-terminals were in use or the

telm driver has not been properly set up (see

tels(7)).

Next step: Check the Telnet pseudo driver conﬁguration of the host where

telnetd is execut-

ing.

fork: No more processes

telnetd

was unable to fork a process to handle the incoming connection.

Next step: Wait a period of time and try again. If this message persists, the server’s host may

have runaway processes that are using all the entries in the process table.

/usr/bin/login:

...

The login program could not be started via

exec*() for the reason indicated (see exec(2)).

WARNINGS

The terminal type name received from the remote client is converted to lowercase.

telnetd never sends TELNET go ahead commands.

AUTHOR

telnetd was developed by the University of California, Berkeley.