HP-UX Reference (11i v1 05/09) - 1M System Administration Commands N-Z (vol 4)

ManualsBrandsHP ManualsSoftwareHP-UX Reference Manuals

241

242

243

244

245

246

247

248

249

250

rlogind(1M)

Kerberos rlogind(1M)

Cannot allocate pty on remote host

The server was unable to obtain a pseudo-terminal for use with the login process. Either all

pseudo-terminals were in use, or the pty driver has not been properly set up. Note, the number

of slave devices that can be allocated depends on NSTRPTY, a kernel tunable parameter. This

can be changed via SAM ( see ptm(7), pts(7)).

Next step: Check the pty conﬁguration of the host where

rlogind executes.

Permission denied

The server denied access because the client was not using a reserved port. This should only hap-

pen to interlopers trying to break into the system.

/usr/bin/login: ...

The login program could not be started via exec(2) for the reason indicated.

Next step: Try to correct the condition causing the problem. If this message persists, contact

your system administrator.

rcmd: connect : <hostname>: Connection refused.

This generic message could be due to a number of reasons. One of the reasons could be because

the entry for login service is not present in /etc/inetd.conf

. This entry may have been

removed or commented out to prevent non-secure access.

Kerberos speciﬁc errors are listed in sis(5).

WARNINGS

The integrity of each host and the connecting medium is assumed if the "privileged port" authentication

procedure is used in a non-secure environment or if the command line options

-R or -r

are used in a

secure environment. Although both these methods provide insecure access, they are useful in an "open"

environment. This is insecure, but is useful in an ‘‘open’’ environment.

Note also that all information, including any passwords, are passed unencrypted between the two hosts

when

rlogind is invoked in a non-secure environment.

AUTHOR

rlogind was developed by the University of California, Berkeley.

FILES

/etc/hosts.equiv

List of equivalent hosts

$HOME/.rhosts User’s private equivalence list