HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

arrayfmt(1M) arrayfmt(1M)

arrayfmt: Cannot format array while a diagnostic is running.

An attempt was made to format the array while a diagnostic was in progress. Allow the diagnostic to

complete or cancel the test using dteststat.

arrayfmt: Device was just powered-on or reset.

A command failed because the disk array has been powered-on or reset. Reissue the command and it

should succeed.

EXAMPLES

Format LUN 1 on disk array serial number

00786b5c0000 :

arrayfmt -L 1 00786b5c0000

Format the entire disk array identiﬁed by device ﬁle

/dev/rdsk/c2t0d0

arrayfmt -F /dev/rdsk/c2t0d0

DEPENDENCIES

ARMServer must be running to execute this command. See ARMServer(1M).

SECURITY CONFIGURATION

This command is modiﬁed for all security conﬁgurations.

Security Behavior/Restrictions

Use of this command is restricted to authorized users only.

Command Authorizations

This command requires the

sysadmin authorization to successfully execute.

Privileges

The command has been modiﬁed to support least privilege. The potential privileges possessed by the com-

mand and their uses include:

allowdacread This privilege is raised to provide discretionary read access to the devices.

allowdacwrite This privilege is raised to provide discretionary write access to the devices.

allowmacread This privilege is raised to provide mandatory read access to the devices.

allowmacwrite This privilege is raised to provide mandatory write access to the devices.

filesysops This privilege is raised to allow the mknod(2) system call to succeed.

writeaudit The command generates its own audit records and submits these directly to the sys-

tem audit trail. This privilege is raised whenever the command needs to write an

audit record.

AUTHOR

arrayfmt was developed by HP.