HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

intctl(1M) intctl(1M)

Display interrupt information of all interface cards under the hardware path

0/4 and which belong to class

lan:

intctl -C lan -H 0/4

Display interrupt information about the CPU with CPU ID

intctl -c 3

Migrate the interrupt with ID 1, coming from the card whose hardware path is

0/4/0/0/5/0 to CPU 3.

intctl -M -H 0/4/0/0/5/0 -I 1 -c 3

Store the system interrupt conﬁguration to

myconfig.Ifmyconfig already exists, its contents are

overwritten.

intctl -s myconfig

Restore the system interrupt conﬁguration from

myconfig.

intctl -r myconfig

WARNING

The intctl command can be executed only by the super user. The intctl command should be used

only by performance analysts for performance tuning purposes. If care is not taken to redistribute the

interrupts properly, it could lead to a decrease in the overall system performance by overloading some pro-

cessors and by not optimally utilizing the remaining processors.