HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)
i
insf(1M) insf(1M)
Block entry
rfloppy/ccardttargetddevice rw-r----- bin sys
Character entry
dlpi
The following special files are installed:
dlpi rw-rw-rw- root sys
dlpi0 rw-rw-rw- root sys
dlpi1 rw-rw-rw- root sys
dlpi2 rw-rw-rw- root sys
dlpi3 rw-rw-rw- root sys
dlpi4 rw-rw-rw- root sys
dmem
The following special file is installed:
dmem rw------- bin bin
echo
The following special file is installed:
echo rw-rw-rw- root sys
eisa_mux0 pci_mux0
For each instance of an EISA mux or PCI mux card, the following "Direct Connect" special files are
created. The term "card" below refers to the instance number of the mux card.
ttycardport_module port
rw--w--w- bin bin
letter: a to p, port module name
port: 1 to 16, direct connect
muxcard rw------- bin bin
diag/mux
card rw------- bin bin
diag/mux
card_1 rw------- bin bin
diag/mux
card_2 rw------- bin bin
fddi
The following special file is installed:
lancard rw-rw-rw- bin bin
framebuf
For each graphics device claimed by ’graph3’ driver, the following special files are installed.
crtdevice_number rw-rw-rw- bin bin
ocrt
device_number
rw-rw-rw- bin bin
device_number is 0 indexed and is not assigned in the order in which the devices appear in ioscan(1M)
output.
If the console device is a graphics device, the files crt and ocrt are created as the console device. If
the console is not a graphics device, crt and ocrt are identical to crt0 and ocrt0.
hil For each device, the following special files are installed. Note the underscore (_) before card in each
special file name.
For card 0, the device files are linked to files named hiladdr for the link addresses 1 to 7; hilkbd
for the cooked keyboard device; and rhil for the hil controller device.
hil_card.addr rw-rw-rw- bin bin
addr: link addresses 1 to 7
hilkbd_
card rw-rw-rw- bin bin
Section 1M−−366 Hewlett-Packard Company − 5 − HP-UX 11i Version 1: September 2005