HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

hotplugd(1M) hotplugd(1M)

gives the time at which the event was received.

Wait for the attention button processing on a slot to complete before pressing the attention button

again on that slot.

#oprnNum - slot( slotId ) - Setting power led to PWR_RAIL mode failed,

errno =

errMsg

The power LED could not be set to

PWR_RAIL mode for the given slotId. errMsg gives the reason for

the error.

#oprnNum - slot( slotId ) - Setting power led to PWR_RAIL mode failed,

olar_error_no =

olarErrMsg

The power LED could not be set to

PWR_RAIL mode for the given slotId. olarErrMsg gives the rea-

son for the error.

Usage : hotplugd <logFileName> <append|trunc>

The hotplugd program was invoked with an invalid set of parameters.

hotplugd : fork() failed, errno = errMsg

hotplugd could not fork itself. errMsg gives the reason for the error.

hotplugd : Could not open log file : logFile, errno = errMsg

hotplugd could not open the given logFile in write mode. errMsg gives the reason for the error.

hotplugd : Could not get lock on file : logFile, errno = errMsg

hotplugd could not get the lock on the logFile. errMsg gives the reason for the error.

It could be because another instance of hotplugd is running.

FILES

/etc/rc.config.d/pci_olar

Conﬁguration ﬁle for PCI I/O OLAR operations.

/sbin/init.d/pci_olar

Startup script, used to start the daemon.

/var/adm/hotplugd.log

Installed default name of ﬁle where the daemon logs messages. See the DIAGNOSTICS

section and the Daemon Startup subsection for details.

/var/adm/syslog/syslog.log

System log ﬁle. See the DIAGNOSTICS section for details.