HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

g
getty(1M) getty(1M)
NAME
getty - set terminal type, modes, speed, and line discipline
SYNOPSIS
/usr/sbin/getty
[ -h ][-ttimeout ] line [speed [type [ linedesc ]]]
/usr/sbin/getty -c
file
DESCRIPTION
getty is a program that is invoked by init(1M). It is the second process in the series, (init-getty-login-
shell) that ultimately connects a user with the HP-UX system. Initially, if
/etc/issue exists, getty
prints its contents to the user’s terminal, followed by the login message field for the entry it is using from
/etc/gettydefs
. getty reads the user’s login name and invokes the login(1) command with the
user’s name as argument. While reading the name,
getty attempts to adapt the system to the speed and
type of terminal being used.
Configuration Options and Arguments
getty recognizes the following arguments:
line Name of a tty line in /dev to which getty is to attach itself. getty
uses this string
as the name of a file in the
/dev directory to open for reading and writing. By default
getty forces a hangup on the line by setting the speed to zero before setting the speed
to the default or specified speed. However, when getty is run on a direct port,
getty
does not force a hangup on the line since the driver ignores changes to zero speed on
ports open in direct mode (see modem(7)).
-h Tells getty not to force a hangup on the line before setting the speed to the default or
specified speed.
-t timeout getty exits if the open on the line succeeds and no one types anything within timeout
seconds.
speed A label to a speed and tty definition in the file
/etc/gettydefs
. This definition tells
getty at what speed to initially run, what the login message should look like, what the
initial tty settings are, and what speed to try next should the user indicate that the speed
is inappropriate (by typing a break character). The default speed is 300 baud.
type A character string describing to
getty what type of terminal is connected to the line in
question. getty understands the following types:
none default
vt61 DEC vt61
vt100 DEC vt100
hp45 Hewlett-Packard HP2645
c100 Concept 100
The default terminal is none; i.e., any crt or normal terminal unknown to the system.
Also, for terminal type to have any meaning, the virtual terminal handlers must be com-
piled into the operating system. They are available, but not compiled in the default con-
dition.
linedesc A character string describing which line discipline to use when communicating with the
terminal. Hooks for line disciplines are available in the operating system, but there is
only one presently available — the default line discipline, LDISC0.
When given no optional arguments, getty sets the speed of the interface to 300 baud, specifies that raw
mode is to be used (awaken on every character), that echo is to be suppressed, either parity allowed, new-
line characters will be converted to carriage return-line feed, and tab expansion performed on the standard
output. It types the login message before reading the user’s name a character at a time. If a null character
(or framing error) is received, it is assumed to be the result of the user pushing the ‘‘break’’ key. This
causes getty to attempt the next speed in the series. The series that getty tries is determined by what
it finds in /etc/gettydefs.
The user’s name is terminated by a new-line or carriage-return character. The latter results in the system
being set to treat carriage returns appropriately (see ioctl(2)).
HP-UX 11i Version 1: September 2005 − 1 − Hewlett-Packard Company Section 1M−−305