HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

ManualsBrandsHP ManualsSoftwareHP-UX Reference Manuals

311

312

313

314

315

316

317

318

319

320

gdc(1M) gdc(1M)

restart If gated is running it is terminated via the same procedure as is used for the

stop com-

mand above. When the previous

gated terminates, or if it was not running prior to com-

mand execution, a new gated process is executed using the procedures described for the

start command above. A non-zero exit status is returned if any step in this procedure

appears to have failed.

The following commands allow the removal of ﬁles created by the execution of some of the commands

above:

rmcore Removes any existing gated core dump ﬁle.

rmdump Removes any existing gated state dump ﬁle.

rmparse Removes the parse error ﬁle generated when a

checkconf or checknew command is

executed and syntax errors are encountered in the conﬁguration ﬁle being checked.

FILES

Many of default ﬁlenames listed below contain the string %s, which is replaced by the name with which

gated is invoked. Normally this is

gated

, but if invoked as gated-test , gated will by default look for

/etc/gated-test.conf

. These paths may all be changed at compilation time.

/usr/sbin/gated The gated

binary.

/etc/gated.conf Current

gated conﬁguration ﬁle.

/etc/gated.conf+ Newer conﬁguration ﬁle.

/etc/gated.conf- Older conﬁguration ﬁle.

/etc/gated.conf--

Much older conﬁguration ﬁle.

/var/run/gated.pid

Where gated stores its pid.

/var/tmp/gated_dump gated

’s state dump ﬁle.

/var/tmp/gated_parse

Where conﬁg ﬁle parse errors go.

/var/tmp Where gated drops its core ﬁle.

AUTHOR

gdc was developed by Dennis Ferguson and Cornell University.