HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

f
fsdb_vxfs(1M) fsdb_vxfs(1M)
extents ( ie ). The addresses are displayed when printing an ilist entry. Set the
current block position to the resulting offset. If it is the last command on a line, print
the first word in the block in hexadecimal.
im Set the current position to immediate data area of the current inode. Set the current
block position to the resulting offset. If it is the last command on a line, print the first
word of the area in hexadecimal.
attr Set the current position to attribute data area of the current inode. Set the current
block position to the resulting offset. If it is the last command on a line, print the first
word in the block in hexadecimal.
# B|H|W|D =# [#]
Set the current position and change the number at the specified offset to the given
number. If a double-word offset is specified, then two numbers separated by a space
are required. The resulting value is printed in hexadecimal.
+|-# B|H|W|D =# [#]
Set the current position and change the number at the specified relative offset to the
given number. If a double-word offset is specified, then two numbers separated by a
space are required. The resulting value is printed in hexadecimal.
# B|H|W|D = string
Set the current position and change the characters at the specified offset to the given
string. The resulting value is printed as a character string.
+|- # B|H|W|D = string
Set the current position and change the characters at the specified relative offset to
the given string. The resulting value is printed as a character string.
olt Set the current position to the object location table (olt). If it is the last command on a
line, print the object location table.
p [#] format
Print the contents of the file system at the current offset as the specified number of
entries of a given format. The allowable print formats are specified above. If a
number of entries to print is not specified, one entry is printed.
inode_field =#
Set the contents of the given inode field to the specified number. The current inode
specifies the inode list entry to be modified. The symbols representing inode fields are
listed above.
directory_block_field
=#
Set the contents of the given directory block field to the specified number. The
current block is treated as a directory block and the offset in that block which is
represented by the given field is changed. The symbols representing directory block
fields are listed above.
d# Set the current directory entry to the specified number. The current block is treated
as a directory block. If the current block is an immediate data area for an inode, then
the block is treated as containing immediate directory entries. If it is the last com-
mand on a line, the directory entry at the resulting offset is printed.
directory_entry_field =#
Set the contents of the given directory field to the specified number. The current
directory entry specifies where the directory entry is located. The resulting value is
printed in hexadecimal.
nm = string Set the directory name field of the current directory entry to the specified string. The
resulting value is printed as a character string.
calc # [+|-|∗|/ #]
Take a number or the sum, difference, product or dividend of two numbers and print
in decimal, octal, hexadecimal and character format.
find # B|H|W|D [#]
Search for the given numeric pattern in the file system. The size of the object to
match is specified. If a double-word is specified, then two numbers must be given.
The search is performed forward from the current offset. A maximum number of
Section 1M−−276 Hewlett-Packard Company − 6 − HP-UX 11i Version 1: September 2005