HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

f
frecover(1M) frecover(1M)
NAME
frecover - selectively recover files
SYNOPSIS
/usr/sbin/frecover -r
[-hmosvyAFNOX ][-c config ][
-f device ][-S skip ][-E extarg ]
/usr/sbin/frecover -R
path [-f device ]
/usr/sbin/frecover -x
[-hmosvyAFNOX ][-c config ][
-e path ][-f device ][-g graph ]
[
-i path ][-S skip ][
-E extarg ]
/usr/sbin/frecover -I
path [-vy][
-f device ][-c config ]
/usr/sbin/frecover -V
path [-vy][-f
device ][-c config ]
DESCRIPTION
frecover reads media written by the fbackup
command. Its actions are controlled by the selected
function
-r, -R, -x,
-V,or-I.
The function performed by
frecover is specified by one of the following options:
-r The backup media is read and the contents are loaded into the directories from which they
were backed up. This option should only be used to recover a complete backup onto a clear
directory or to recover an incremental backup after a full level-zero recovery (see
fbackup(1M)). This is the default behavior.
-x The files identified by the -i, -e, and -g options (see below) are extracted or not extracted
from the backup media. If a file to be extracted matches a directory whose contents have been
written to the backup media, and the
-h option is not specified, the directory is recursively
extracted. The owner, modification time, and access control list (including optional entries,
unless the -A option is specified) are recovered. If no file argument is given (including an
empty graph file), all files on the backup media are extracted, unless the -h
option is specified.
-I path The index on the current volume is extracted from the backup media and is written to path.
-V path The volume header on the current volume is extracted from the backup media and is written
to path. The following fields from the header are extracted in the format label:value with one
pair per line.
Magic Field On valid fbackup media, it contains the value
FBACKUP_LABEL . On pre-10.20 fbackup media, it contains
FBACKUP LABEL.
Machine Identification
This field contains the result of uname -m.
System Identification
This field contains the result of uname -s.
Release Identification
This field contains the result of uname -r.
Node Identification This field contains the result of
uname -n.
User Identification This field contains the result of cuserid(3S).
Record Size This field contains the maximum length in bytes of a data
record.
Time This field contains the time fbackup was started.
Media Use This field contains the number of times the media has been used
for backup.
Volume Number This field contains a # character followed by 3 digits, and
identifies the current volume in the backup.
Checkpoint Frequency
This field contains the number of data records between check-
points.
Fast Search Mark Frequency
This field contains the number of files between fast search
marks for backups made with DDS tape drives.
Index Size This field contains the size of the index.
Backup Identification Tag
This field is composed of 2 items: the process ID (pid), and the
start time of that process.
HP-UX 11i Version 1: September 2005 − 1 − Hewlett-Packard Company Section 1M−−239