HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

fcmsutil(1M) fcmsutil(1M)

get_int_delay

(QL)

This option displays the current interrupt delay settings for the HBA port.

EXAMPLES

Print the remote port parameters using the get remote option if the driver is idle.

/dev/fcms1 is the

device ﬁle and

/dev/rdsk/c27t0d0

is the respective raw disk ﬁle.

fcmsutil /dev/fcms1 get remote 0x98 < /dev/rdsk/c27t0d0

Print a short listing of the statistics maintained by the driver, with

/dev/td1 as the device ﬁle.

fcmsutil /dev/td1 stat -s

Send 5 echo packets of 200 bytes each to a remote N_Port with loop_id 4, with

/dev/td1 as the device

ﬁle

fcmsutil /dev/td1 echo -l 4 200 5

Print a short listing of the statistics of the device whose remote-N-Port-ID is 0x02ae4 and with

/dev/td1

as the device ﬁle

fcmsutil /dev/td1 devstat 0x02ae4

Clear the device statistics of the device whose wwn is 0x100000e002219f45 and with

/dev/td1 as the dev-

ice ﬁle

fcmsutil /dev/td1 clear_devstat -w 0x100000e002219f45

Perform a Internal loopback test, sending 1000 packets with /dev/fcd2 as the device ﬁle

fcmsutil /dev/fcd2 lb int crpat 1000

AUTHOR

/opt/fcms/bin/fcmsutil

was developed by HP.