HP-UX Reference (11i v1 05/09) - 1M System Administration Commands A-M (vol 3)

ManualsBrandsHP ManualsSoftwareHP-UX Reference Manuals

201

202

203

204

205

206

207

208

209

210

download(1M) download(1M)

One of the arguments has exceeded its maximum or minimum size, or is incorrect in form. Check the

size and form of each argument.

download: Unknown argument

An invalid argument was speciﬁed. Check command usage.

download: No such file or directory

The speciﬁed array-id does not exist or does not identify a disk array that is communicating with the

system. Verify the correct array-id with ioscan(1M) or arraydsp(1M).

download: Error in command execution, <Additional Error Info>:

The command failed due to a device error, an internal error, or a system error. The Additional Error

Info and Error Info Decode ﬁelds will hold speciﬁcs about the failure and its cause.

download: Array was just powered-on or reset.

The command failed because the disk array has been powered-on or reset. Reissue the command and

it should succeed.

EXAMPLES

Download new ﬁrmware from ﬁle coderev2.1 to the controllers on the disk array identiﬁed by device ﬁle

/dev/rdsk/c2t0d0:

download -C coderev2.1 /dev/rdsk/c2t0d0

Download new ﬁrmware from ﬁle diskrev3.2 to the disk installed in slot B2 of disk array serial number

00786b5c0000 :

download -D B2 diskrev3.2 00786b5c0000

Copy the current ﬁrmware from the primary controller to the secondary controller on disk array identiﬁed

by alias AUTORAID4:

download -M AUTORAID4

SECURITY CONFIGURATION

This command is modiﬁed for all security conﬁgurations.

Security Behavior/Restrictions

Use of this command is restricted to authorized users only.

Command Authorizations

This command requires the sysadmin authorization to successfully execute.

Privileges

The command has been modiﬁed to support least privilege. The potential privileges possessed by the com-

mand and their uses include:

allowdacread This privilege is raised to provide discretionary read access to the devices.

allowdacwrite This privilege is raised to provide discretionary write access to the devices.

allowmacread This privilege is raised to provide mandatory read access to the devices.

allowmacwrite This privilege is raised to provide mandatory write access to the devices.

filesysops This privilege is raised to allow the mknod(2) system call to succeed.

writeaudit The command generates its own audit records and submits these directly to the sys-

tem audit trail. This privilege is raised whenever the command needs to write an

audit record.

AUTHOR

download was developed by HP.