HP-UX Reference (11i v1 05/09) - 1 User Commands N-Z (vol 2)

tsm.command(1) tsm.command(1)

NAME

tsm.command - send commands to the Terminal Session Manager

(TSM)

SYNOPSIS

/usr/tsm/bin/tsm.command

command

DESCRIPTION

tsm.command is used to send a command string programmaticly to the Terminal Session Manager

(TSM),

as if the string were typed on the

TSM command line. tsm.command fails unless it is run from inside a

TSM session. Actions caused by tsm.command affect only the instance of

TSM that tsm.command is

run under. command can have any value that is a valid key sequence for the

TSM command line. The

sequence should not include the "hotkey" character that normally initiates the command line mode of

TSM.

The sequence should end at the point where

TSM exits command mode. If it ends prematurely TSM behaves

as though escape was pressed, which exits command mode, usually canceling the command.

\r should be

used to indicate a return key. If no arguments are given on the command line, the program prompts for

input from the user. If a

ˆC terminates the sequence, the remainder of the sequence is accepted from the

user.

AUTHOR

tsm.command was developed by Structured Software Solutions, Inc.