HP-UX Reference (11i v1 05/09) - 1 User Commands A-M (vol 1)

fruled(1) fruled(1)

parstatus(1) command will display the above cell as "cab1,cell4".

RETURN VALUE

The

fruled command exits with one of the following values:

0 Successful completion.

1 Error condition occurred.

2 No LED associated with speciﬁed object.

EXAMPLES

Flash the attention LED of the cell located in cabinet 0 slot 4 and also ﬂash the attention LED of the

cabinet in which it is contained.

fruled -o -B -c 0/4

Turn off the attention LEDs of 2 cells located in cabinet 0, slot 4 and cabinet 0, slot 6.

fruled -f -c 0/4 -c 0/6

DEPENDENCIES

This command uses the Web-Based Enterprise Management (WBEM) product and certain of its

conﬁguration settings. If you encounter connection errors when using the

-u option, check that the follow-

ing two conditions are satisﬁed:

• Use the cimconﬁg(1M) command to verify (and correct if necessary) the setting of the following two vari-

ables:

•

enableRemotePrivilegedUserAccess=true

• enableHttpsConnection=true

• You must have appended the target partition’s digital certiﬁcate to the local partition’s Trust Store ﬁle.

For the nPartition commands, the Trust Store ﬁle is

/opt/nparcmds/nparcmds.pem

Refer to the WBEM documents speciﬁed in the SEE ALSO section below for further information.

AUTHOR

fruled was developed by the Hewlett-Packard Company.

FILES

/usr/sbin/ The partition commands under this directory do not provide remote management

feature.

/usr/lib/npar/ The partition commands under this directory provide remote management feature.

These commands use the nPartition Provider product.

/opt/nparprovider/lib/installed

The presence of this ﬁle indicates that nPartition Provider is installed.