HP-UX Reference (11i v1 05/09) - 1 User Commands A-M (vol 1)

f
fruled(1) fruled(1)
NAME
fruled - flash/turn off attention LEDs (cell, cabinet and I/O chassis attention LEDs)
SYNOPSIS
fruled -c cell [-c...] [-f
|-o][-B]
[
-u username -h IPaddress|hostname
| -g -h IPaddress|hostname ]
fruled -i I/Ochassis [-i...] [
-f|-o][-B]
[
-u username -h IPaddress|hostname
| -g -h IPaddress|hostname ]
fruled -b cabinet [-b...] [-f
|-o]
[
-u username -h IPaddress|hostname
| -g -h IPaddress|hostname ]
fruled -C|-I [-l cabinet][
-l...] [-f]
[
-u username -h IPaddress|hostname
| -g -h IPaddress|hostname ]
DESCRIPTION
The
fruled command flashes/turns off attention LEDs of cells or I/O chassis in the local complex. The
command can also be used to start flashing or stop flashing cabinet number LEDs. If either the
-u option
or the
-g option is specified, the scope of the command will be the specified target complex.
If a cell or I/O chassis attention LED is made to flash, the cabinet number LED of the cabinet that contains
the cell/ I/O chassis can also be made to flash by using the -B option. Likewise, if a cell or I/O chassis’s
LED is being turned off, the cabinet number LED can also be made to stop flashing using the
-B option.
Note: This command does not read or display the state of any LED. Users must observe the hardware
itself to determine the state.
Please refer to the HP System Partitions Guide for a description of the partition management terms used in
this man page.
Remote Management Options
The
-u and -g options will be available only if NParProvider and NPartition products are installed. The
cplxmodify command exist only if NPartition product is installed.
Options and Arguments
fruled recognizes the following command line options and arguments:
-f Turn off specified attention LED(s). This is the default.
-o Start flashing specified attention LED(s).
The -o option is unavailable with -C or -I. The -f and -o options are mutually
exclusive.
-B Start or stop flashing the cabinet number LED of the cabinet that contains the cell or I/O
chassis. The
-B option is only available with the -c and -i options.
-u username Specifies the required authorization to access a partition other than the local partition (but
can also be used as a loopback access to the local partition). The complex to be modified is
the one in which this target partition resides.
The -h option is required if this option is used.
username specifies a configured user name on the target partition. If -u username is
specified, the command will prompt for the password associated with the username.
Note: This command is a Web-Based Enterprise Management (WBEM) Client Application.
The -u option accesses the target partition using a Secure Sockets Layer (SSL) connection.
If errors are reported, check that the conditions described in the DEPENDENCIES section
are satisfied.
Note: If the commands are used in a script, the user password must be passed in a secured
way. For example,
HP-UX 11i Version 1: September 2005 − 1 − Hewlett-Packard Company Section 1−−297