HP-UX Reference (11i v1 05/09) - 1 User Commands A-M (vol 1)
c
cue(1) cue(1)
(Series 800 Only)
VT320 Terminal Support
Because the VT320 terminal has predefined local functions for keys labeled as F1, F2, F3 and F4, users
should use following mapping when they desire to use function keys:
HP or Wyse60 VT320 or HP 700/60 in VT320 mode
F1 PF2 !
F2 PF1 !
F3 space bar
F4 PF3 !
F5 F10, [ EXIT ], F5 *
F6 none
F7 F18, first unlabeled key to right of Pause/Break*
F8 F19, second unlabeled key to right of Pause/Break*
* When using PC-AT keyboard with HP 700/60 in VT320 mode
! See "Configuration: HP 700/60 in DEC mode, or DEC terminals with PC-AT type keyboard"
Further, since DEC terminals do not support softkey menu, no such menu is displayed on these termi-
nals.
Many applications tend to use TAB for forward navigation (moving from one field to another) and
shift-TAB is used for backward navigation. Users having DEC terminals or using terminals in DEC
emulation modes such as VT100 or VT320 may note that these terminals/emulators may give out
same character for TAB and shift-TAB. As such, it is impossible for an application to distinguish
between TAB and shift-TAB, and both of them treated as if a TAB key was pressed. It might present
slight overhead to users in case they want to go backwards. Now instead, they should complete rest of
the inputs and get back to the desired field later.
VT100 Terminal Support
VT100 does not allow the (f1-f8) function keys to be configured. Therefore, the following keyboard map-
pings will apply to VT100 terminals:
HP or Wyse60 VT100 or HP 700/60 in VT100 mode
F1 PF2 !
F2 PF1 !
F3 space bar
F4 [PF3], [space bar] or [PF3], [=] !
F5 return
F6 none
F7 none
F8 none
! See "Configuration: HP 700/60 in DEC mode, or DEC terminals with PC-AT type keyboard"
Further, since DEC terminals do not support softkey menu, no such menu is displayed on these termi-
nals.
Many applications tend to use TAB for forward navigation (moving from one field to another) and
shift-TAB is used for backward navigation. Users having DEC terminals or using terminals in DEC
emulation modes such as VT100 or VT320 may note that these terminals/emulators may give out
same character for TAB and shift-TAB. As such, it is impossible for an application to distinguish
between TAB and shift-TAB, and both of them treated as if a TAB key was pressed. It might present
slight overhead to users in case they want to go backwards. Now instead, they should complete rest of
the inputs and get back to the desired field later.
Configuration: HP 700/60 terminal in DEC mode, or DEC terminal with PC-AT type keyboard
Customers using the following configuration may want to be aware of the following keyboard difference.
HP-UX 11i Version 1: September 2005 − 3 − Hewlett-Packard Company Section 1−−159