HP-UX Reference (11i v1 00/12) - 5 Miscellaneous Topics, 7 Device (Special) Files, 9 General Information, Index (vol 9)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man7/!!!intro.7
________________________________________________________________
___ ___
t
termio(7) termio(7)
Bit Value
m
3
TI/ALP
m
2
0 = Simple protocol (U.S.),
1=CCITT protocol (Europe)
m
1
m
0
00 = Direct
01 = Dial-out modem
10 = Dial-in modem
11 = Invalid
AUTHOR
termios was developed HP and the IEEE Computer Society.
termio was developed by HP, AT&T, and the University of California, Berkeley.
FILES
/dev/console
/dev/cua ∗
/dev/cul ∗
/dev/tty ∗
/dev/ttyd ∗
EISA mux has adopted the following device files naming convention:
/dev/<cua|cul|tty|ttyd><
Instance_Number><Port_Module_Name
><Port_Number>
where Port_Module_Name = [a..h], Port_Number =1-16
For example:
/dev/cua2a1 , /dev/cul2b8 , /dev/tty2g12 , /dev/ttyd2h16
SEE ALSO
adb(1), shl(1), stty(1), config(1M), dmesg(1M), mknod(1M), fork(2), ioctl(2), setsid(2), signal(2), stty(2),
setpgid(2), blmode(3C), cfspeed(3C), tccontrol(3C), tcattribute(3C), tcgetpgrp(3C), tcsetpgrp(3C),
tcgetsid(3C), signal(5), unistd(5), sttyV6(7), tty(7), modem(7), termiox(7).
STANDARDS CONFORMANCE
termio: SVID2, SVID3, XPG2
termios: AES, SVID3, XPG3, XPG4, FIPS 151-2, POSIX.1
Section 7−−180 − 21 − HP-UX Release 11i: December 2000
___
___