HP-UX Reference (11i v1 00/12) - 5 Miscellaneous Topics, 7 Device (Special) Files, 9 General Information, Index (vol 9)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man7/!!!intro.7
________________________________________________________________
___ ___
d
diag1(7) diag1(7)
NAME
diag1 - diagnostic interface to the PCI I/O subsystem
DESCRIPTION
diag1 is a diagnostic pseudo-driver, which provides support tools with access to the PCI I/O subsystem.
This driver is used by tools within the Support Tools Manager (STM) to interact with PCI cards connected
to the system. Without diag1, support tools for PCI cards will not be able to operate.
AUTHOR
diag1 was developed by HP.
FILES
/stand/vmunix
/dev/diag/diag1
/dev/diag
directory containing diagnostic device files
SEE ALSO
stm(1M) from the Support Tools Manager.
Section 7−−22 − 1 − HP-UX Release 11i: December 2000
___
___