HP-UX Reference (11i v1 00/12) - 5 Miscellaneous Topics, 7 Device (Special) Files, 9 General Information, Index (vol 9)
__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man5/!!!intro.5
________________________________________________________________
___ ___
s
signal(5) signal(5)
22 Assist emulation trap.
Refer to the Series 800 processor documentation provided with your system for more detailed information
about the meaning of these errors.
The Instruction Address Offset Queue (program counter) is not advanced when a trap occurs on Series 800
systems. If a signal generated by a hardware trap is masked or has its signal action set to SIG_IGN, the
program loops infinitely since the instruction causing the trap is re-executed, causing the trap again. If the
signal is received by a signal-catching function in the user program, the instruction that caused the trap is
re-executed upon return from the signal-catching function unless program flow is altered by the signal-
catching function. For example, the longjmp() routine (see setjmp(3C)) can be called. Using
longjmp() ensures software portability across different hardware architectures.
AUTHOR
signal was developed by HP, AT&T, and the University of California, Berkeley.
SEE ALSO
kill(1), init(1M), bsdproc(3C), exit(2), kill(2), lseek(2), pause(2), sigaction(2), signal(2), sigvector(2), wait(2),
sigset(3C), abort(3C), setjmp(3C).
STANDARDS CONFORMANCE
<signal.h>: AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.1, ANSI C
Section 5−−338 − 4 − HP-UX Release 11i: December 2000
___
___