HP-UX Reference (11i v1 00/12) - 4 File Formats (vol 8)
__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man4/!!!intro.4
________________________________________________________________
___ ___
a
arraytab(4) arraytab(4)
For configurations using logical partitions exceeding 2 GB it is necessary that the 2 GB governor flag be
turned off in the array controller. See see(1M).
DEPENDENCIES:
Series 700:
LUN address 6 and 7 are reserved for use with array management utilities, and should not be configured.
Series 800:
LUN address 6 and 7 are reserved for use with array management utilities, and should not be configured.
Only RAID levels 0 (Independent), 3, and 5 are supported.
RAID 0 configurations must span only a single disk (Independent mode) and result in separate addressable
logical partitions, one for each physical disk.
RAID 3 and RAID 5 configurations must result in a single logical partition, which span all disks on the
array.
AUTHOR:
arraytab was developed by HP.
FILES
/etc/hpC2400/arraytab
SEE ALSO
newarray(1M), mkfs(1M), cfl(1M), fs(4), see(1M).
HP-UX Release 11i: December 2000 − 5 − Section 4−−25
___
___