HP-UX Reference (11i v1 00/12) - 2 System Calls (vol 5)
__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man2/!!!intro.2
________________________________________________________________
___ ___
s
sendfile64(2) sendfile64(2)
connected to its peer.
[EPIPE] With SIGPIPE signal. An attempt was made to send on a socket that was connected,
but the connection has been shut down either by the remote peer or by this side of the
connection. Note that the default action for SIGPIPE, unless the process has esta-
blished a signal handler for this signal, is to terminate the process.
[EAGAIN] Nonblocking I/O is enabled using the O_NONBLOCK flag with fcntl(), and the
requested operation would block.
[EWOULDBLOCK] The socket is marked non-blocking and the requested operation would block.
[ENOMEM] No memory is available in the system to perform the operation.
[EOPNOTSUPP] The socket is not a TCP socket.
Return Value == 0 An application has opened a large file (see open(2)) and is trying to use sendfile64
without having been compiled with _LARGEFILE64_SOURCE and
_FILE_OFFSET_BITS=64 compile flags.
SEE ALSO
connect(2), creat64(2), read(2), send(2), sendfile(2), shutdown(2), socket(2), tcp(7P), write(2).
HP-UX Release 11i: December 2000 − 2 − Section 2−−303
___
___