HP-UX Reference (11i v1 00/12) - 1M System Administration Commands N-Z (vol 4)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/naaagt.1m
________________________________________________________________
___ ___
u
ups_mond(1M) ups_mond(1M)
(Series 800 Only)
ERRORS
ups_mond returns the following error values:
EINVAL ups_mond encountered an incorrect parameter.
EPERM Insufficient privileges. ups_mond must be started by a superuser.
EINTR ups_mond was interrupted (terminated) by signal() or kill(). See signal(2) and
kill(1).
one (1) For all other error conditions.
FILES
/dev/tty*
/etc/ups_conf
/var/tmp/timed_off
/var/adm/syslog/syslog.log
SEE ALSO
kill(1), init(1M), plock(2), signal(2), syslog(3C), inittab(4), ups_conf(4).
HP-UX Release 11i: December 2000 − 4 − Section 1M−−981
___
___