HP-UX Reference (11i v1 00/12) - 1M System Administration Commands N-Z (vol 4)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/naaagt.1m
________________________________________________________________
___ ___
s
swpackage(1M) swpackage(1M)
Re-package the entire contents of the depot /var/spool/sw onto the tape at /dev/rmt/0m :
swpackage -s /var/spool/sw -x media_type=tape @ /dev/rmt/0m
FILES
/dev/rmt/0m
The default location of a source and target tape. (Note that SD can read both tar and cpio tape
depots.)
$HOME/.swdefaults
Contains the user-specific default values for some or all SD options.
$HOME/.sw/sessions/
Contains session files automatically saved by the SD commands, or explicitly saved by the user.
/usr/lib/sw/sys.defaults
Contains the master list of current SD options with their default values.
/var/adm/sw/
The directory which contains all of the configurable and non-configurable data for SD. This directory
is also the default location of logfiles.
/var/adm/sw/defaults
Contains the active system-wide default values for some or all SD options.
/var/spool/sw/
The default location of a source and target software depot.
AUTHOR
swpackage was developed by the Hewlett-Packard Company and Mark H. Colburn (see pax(1)).
SEE ALSO
sd(4), swpackage(4), sd(5).
Software Distributor Administration Guide, available at
http://docs.hp.com.
SD customer web site at
http://software.hp.com/SD_AT_HP/
.
HP-UX Release 11i: December 2000 − 10 − Section 1M−−923
___
___