HP-UX Reference (11i v1 00/12) - 1M System Administration Commands N-Z (vol 4)
__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/naaagt.1m
________________________________________________________________
___ ___
n
netfmt(1M) netfmt(1M)
The time_from specification includes only those records starting from the resolu-
tion of time given. For example, if the time_of_day for time_from is specified as
10:08:00, all times before that, from 10:07:59.999999 and earlier, are excluded from
the formatted output. Records with times of 10:08:00.000000 and later are included in
the formatted output. Similarly, the time_through specification includes only up
to the resolution of time given. For example, if the time_of_day for time_through
is specified as 10:08:00, all records with times after that, from 10:08:00.000001
onward, are excluded from the formatted output.
Global Filtering: For KL’s Subsystems
The below explained global filtering options apply only to KL’s subystems. KL’s global filtering commands
start with the word kl_formatter , followed by either verbosity,orfilter.
kl_formatter verbosity value,
value should be either of
high This will format the packets with the UDD, displayed along with the
header of the KL packet
low This will format only the header part of the
KL packet. No UDD will
be formatted.
verbosityof This will format only the header part of
the KL packet. No UDD will be formatted. verbosityof low is
default.
kl_formatter filter type [! ]value *
types of filtering are provided:
class log classes
processor_id specific CPU’s
process_id specific process id’s
thread_id specific thread id’s
subsystem subsystem names
time specify ranges of time(s)
The following combinations are recognized:
kl_formatter filter class value [subsystem]
value indicates the log class. This option allows the user to select one or more classes
to be formatted. Initially all log classes are formatted. Only one class is allowed per
line. Classes in multiple lines are logically ‘‘OR’’ed. The optional subsystem name sets
the class filter only for the specified subsystem. The log classes are:
INFORMATIVE Describes routine operations and current system values.
WARNING Indicates abnormal events possibly caused by subsystem
problems.
ERROR Signals an event or condition which was not affecting the
overall subsystem or network operation, but may have caused
an application program to fail.
DISASTER Signals an event or condition which did affect the overall sub-
system or network operation, caused several programs to fail
or the entire node to shut down.
kl_formatter filter Processor_ID value
kl_formatter filter Process_ID value
kl_formatter filter Thread_ID value
value specifies the ID number of the messages to format. Last-entered value has pre-
cedence over any previous ones. See the record header in the formatted output to
determine which ID numbers to filter on. The ! operator is not allowed in value.
kl_formatter filter subsystem value
value specifies the subsystem name. Available subsystem names can be listed by
using the command:
nettlconf -status
Only one subsystem name is allowed per line; multiple lines ‘‘OR’’ the request. To
eliminate a given subsystem name, use the ! operator, which formats all subsystems
except those excluded by the list of negated subsystems. To include all subsystems
Section 1M−−542 − 5 − HP-UX Release 11i: December 2000
___
___