HP-UX Reference (11i v1 00/12) - 1M System Administration Commands N-Z (vol 4)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/naaagt.1m
________________________________________________________________
___ ___
s
swinstall(1M) swinstall(1M)
(Hewlett-Packard Company)
swinstall -x reinstall=true -f/tmp/install.products \
-t/tmp/install.hosts
Execute swinstall interactively using the session file /tmp/case.selections as a basis:
swinstall -i -S /tmp/case.selections
Install all the software from local depot /tmp/sample.depot.1, using any response files generated by
request scripts:
swinstall -s /tmp/sample.depot.1 -x ask=true \*
Install Product1 from remote depot /tmp/sample.depot.1 on host swposix and use an exist-
ing response file (previously generated by the swask command) located in /tmp/bar.depot:
swinstall -s swposix:/tmp/sample.depot.1 -c /tmp/bar.depot Product1
Install all products in remote depot /tmp/sample.depot.1 on host swposix, use any response files
generated by request scripts, create catalog /tmp/bar.depot and copy all response files to the new
catalog:
swinstall -s swposix:/tmp/sample.depot.1 -c /tmp/bar.depot \
-x ask=true \*
Install all products in remote depot /tmp/sample.depot.1 on host swposix
, use response files,
run request scripts only when a response file is absent, create catalog
/tmp/bar.depot
and copy all
response files to the new catalog:
swinstall -s swposix:/tmp/sample.depot.1 -c swposix:/tmp/bar.depot \
-x ask=as_needed \*
Install all patches in the depot that correspond to currently installed software and are of the critical
category:
swinstall -s /tmp/sample.depot.1 -x patch_match_target=true \
-x patch_filter=\"*.*, c=critical\"
The following example applies to HP-UX 10.X only.
To linkinstall the product TEST to the clients clientA, clientB from the server:
swinstall -l -r -s :OS_700 TEST @ clientA clientB
The following example applies to HP-UX 10.X only.
To linkinstall product TEST2 to your own "/" directory from an application server on "serve":
swinstall -l -s serve TEST2
swcopy
Invoke an interactive session of swcopy:
swcopy
Invoke an interactive session, using default depot at hostX as the source:
swcopy -i -s hostX
Copy all products from the cartridge tape /dev/rmt/0m to the default depot on the local host:
swcopy -s /dev/rmt/0m \*
Load the software_selections listed in the file
/tmp/load.products using the default source/depot:
swcopy -f /tmp/load.products
Copy the C and Pascal products to some local and remote depots:
swcopy -s sw_server cc pascal @ /var/spool/sw hostA:/tmp/sw hostB
FILES
$HOME/.swdefaults
Contains the user-specific default values for some or all SD options. If this file does not exist, SD
looks for user-specific defaults in $HOME/.swdefaults.hosts
.
Section 1M−−886 − 20 − HP-UX Release 11i: December 2000
___
___