HP-UX Reference (11i v1 00/12) - 1M System Administration Commands N-Z (vol 4)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/naaagt.1m
________________________________________________________________
___ ___
n
naaagt(1M) naaagt(1M)
International Code Set Support
Supports single-byte character code sets except where the SNMP protocol supports only 7-bit characters
encoded in ASCII.
WARNINGS
The Native Agent Adapter only supports SNMP read requests (for example, SNMP Get). SNMP Set
requests must be sent directly to the third-party SNMP agent’s non-standard UDP port (HP_NAA_PORT ).
If the HP_NAA_PORT value is not a valid port number, naaagt terminates without writing any error
message either to the display or to /var/adm/snmpd.log.
If there are no valid OIDs in the naaCnf file, naaagt terminates. It does not register a default OID.
There may be unexpected results if the -E priority is outside the valid range.
AUTHOR
naaagt was developed by SNMP Research and Hewlett-Packard Company.
FILES
/etc/SnmpAgent.d/naa.cnf
Default naaCnf file. Not recommended.
/sbin/SnmpAgtStart.d
Directory for SNMP start-up and shutdown scripts.
/usr/sbin/naaagt Native Agent Adapter command.
/usr/sbin/snmpdm HP SNMP Master Agent command.
/var/adm/snmpd.log
HP SNMP log file.
SEE ALSO
rc(1M), snmpd(1M), snmpd.conf(4).
HP-UX Release 11i: December 2000 − 3 − Section 1M−−523
___
___