HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)
__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
a
arrayrecover(1M) arrayrecover(1M)
Usage: arrayrecover [[-s] | [-l[c]] | [-p] | [-v volume-set-id]]
[-c] [override] [-?]<array-id>
An error in command syntax has occurred. Re-enter the command with all necessary arguments.
arrayrecover: Arg out of range
One of the arguments has exceeded its maximum or minimum size, or is incorrect in form. Check the
size and form of each argument.
arrayrecover: Unknown argument
An invalid argument was specified. Check command usage.
arrayrecover: No such file or directory
The specified array-id does not exist or does not identify a disk array that is communicating with the
system. Verify the correct array-id with ioscan(1M).
arrayrecover: Error in command execution, <Additional Error Info>:
<Error Info Decode>
The command failed due to a device error, an internal error, or a ystem error. The Additional Error
Info and Error Info Decode fields will hold specifics about the failure and its cause.
EXAMPLES
Perform a recovery on the default volume set on disk array serial number
00786b5c0000 :
arrayrecover -p 00786b5c0000
Retrieve status for the recovery in progress on the disk array serial number 00786b5c0000 . Also have
the status continually updated until completion.
arrayrecover -s -c 00786b5c0000
DEPENDENCIES
arrayscan must be installed and ARMServer must be running to execute this command. See
ARMServer(1M).
SECURITY CONFIGURATION
This command is modified for all security configurations.
Security Behavior/Restrictions
Use of this command is restricted to authorized users only.
Command Authorizations
This command requires the sysadmin authorization to successfully execute.
Privileges
The command has been modified to support least privilege. The potential privileges possessed by the com-
mand and their uses include:
allowdacread This privilege is raised to provide discretionary read access to the devices.
allowdacwrite This privilege is raised to provide discretionary write access to the devices.
allowmacread This privilege is raised to provide mandatory read access to the devices.
allowmacwrite This privilege is raised to provide mandatory write access to the devices.
filesysops This privilege is raised to allow the mknod(2) system call to succeed.
writeaudit The command generates its own audit records and submits these directly to the sys-
tem audit trail. This privilege is raised whenever the command needs to write an
audit record.
AUTHOR
arrayrecover was developed by HP.
SEE ALSO
ARMServer(1M), arraycfg(1M), arraydsp(1M), arrayfmt(1M), arraylog(1M), arraymgr(1M), arrayrbld(1M),
download(1M), drivetest(1M), dteststat(1M), logprint(1M).
HP-UX Release 11i: December 2000 − 2 − Section 1M−−71
___
___